SEARCH
Search Details
ABE Akihisa
Research activity information
■ Paper- Abstract This study aims to develop methods for minimizing underwater noise generated by impact pile driving, with a specific emphasis on pile designs less prone to producing such noise. The underwater noise originates from the expansion of the pile due to the Poisson effect as the longitudinal wave propagates through the pile while driving. It was hypothesized that an irregular surface profile of the pile could effectively induce longitudinal wave diffraction and attenuation. Both experimental trials and numerical simulations were conducted to explore how the surface profile of the pile influences underwater noise. During the experiments, driving simulations were performed using test rods, and comparisons were drawn between configurations with and without convex sections. Visual observations revealed the occurrence of oblique shock waves immediately following impact, along with arc-shaped compression waves emanating from the convex sections of the shape, subsequently leading to the formation of bubbles, thus producing compression waves. Simulation findings demonstrated that thicker test rods exhibit greater damping effects, aligning with the experimental outcomes. In the presence of convex sections, the pressure decayed more rapidly, with the pressure value after decay also being smaller compared to conditions lacking convex sections. In conclusion, it is proposed that the shape of the pile could effectively mitigate pressure waves, leading to a significant reduction in underwater noise by generating expansion waves that counteract compressive waves.Last, Springer Science and Business Media LLC, May 2025, Journal of Ocean Engineering and Marine Energy, English[Refereed]Scientific journal
- Last, International Society of Offshore and Polar Engineers, Mar. 2024, International Journal of Offshore and Polar Engineering, 34(1) (1), 93 - 100[Refereed]Scientific journal
- Last, International Society of Offshore and Polar Engineers, Mar. 2024, International Journal of Offshore and Polar Engineering, 34(1) (1), 67 - 74[Refereed]Scientific journal
- Last, Jul. 2023, Proc. the 34th International Symposium on Shock Waves (ISSW34), EnglishGeneration and behavior of underwater shock waves and microbubbles produced by metal plate discharge[Refereed]International conference proceedings
- Last, Jun. 2023, Proc. 23rd International Offshore and Polar Engineering Conference, EnglishExperimental analysis of underwater noise produced by impacted bars[Refereed]International conference proceedings
- Last, Jun. 2023, Proc. 23rd International Offshore and Polar Engineering Conference, EnglishCompressible hydrodynamic consideration of cavitating jets on the scraping action of organisms attached on marine structures[Refereed]International conference proceedings
- Corresponding, Mar. 2023, 2022年度衝撃波シンポジウム講演論文集, 1 - 4, Japanese金属板を介した水中放電による衝撃波と微小気泡生成Research society
- Corresponding, Mar. 2023, 2022年度衝撃波シンポジウム講演論文集, 1 - 3, Japanese水中衝撃波と弾性膜の干渉によるOHラジカルの生成効果Research society
- Corresponding, Mar. 2023, 2022年度衝撃波シンポジウム講演論文集, 1 - 6, Japanese先端形状が異なる飛翔体の水中貫入に伴う周囲流れの解析Research society
- Corresponding, Oct. 2022, 第92回(令和4年)マリンエンジニアリング学術講演会, 201 - 202, Japanese付着物除去効果向上のためのキャビテーション噴流挙動の観測と解析Research society
- Corresponding, Oct. 2022, 第92回(令和4年)マリンエンジニアリング学術講演会, 203 - 204, Japanese洋上風車パイル打設時の水中騒音発生メカニズムに関する研究Research society
- Jun. 2022, 混相流, 36(2) (2), 172 - 179, JapaneseObservation of shock wave generation in a cavitating jet focusing on change in image brightness[Invited]Scientific journal
- Corresponding, Sep. 2021, 第91回(令和3年度)マリンエンジニアリング学術講演会講演論文集, 257 - 258, Japanese水中騒音低減のための水中衝撃波の減衰効果に関する研究Research society
- Cambridge University Press (CUP), Jul. 2021, Journal of Fluid Mechanics, 919, A42-1 - A42-27, English
Abstract [Refereed]Scientific journal - Corresponding, Mar. 2020, Proc. Symptoms. Shock Waves in Japan, FY2019, 1 - 5, JapaneseNumerical prediction of the amount of OH radical produced with the collapse of microbubbles induced by an underwater shockwaveSymposium
- Corresponding, Mar. 2020, Proc. Symp. Shock Waves in Japan, FY2019, 1 - 3, JapaneseFundumental study on underwater shock wave generation using a diaphragmless shock tubeSymposium
- Corresponding, Mar. 2020, Proc. Symp. Shock Waves in Japan, FY2019, 1 - 3, JapaneseStudy on Shock Waves and Erosion Generated by Cavitation Jet with Different Incident AnglesSymposium
- Corresponding, Oct. 2019, 第89回マリンエンジニアリング学術講演会論文集, 1 - 2, Japanese付着粒子状物質に対するキャビテーション噴流の除去効果に関する研究Research society
- Jul. 2019, Proceedings of the 32nd International Symposium on Shock Waves (ISSW32), 151 - 158, English[Refereed]International conference proceedings
- The American Institute of Physics, Dec. 2018, Journal of Applied Physics, 124(21) (21), 213301 - 213301, English[Refereed]Scientific journal
- Oct. 2018, Ultrasonics-Sonochemistry, S1350-4177 (18) 30880-0, English[Refereed]Scientific journal
- May 2018, Proceedings of the 10th International Symposium on Cavitation (CAV2018), 1 - 4, EnglishExperimental Study on Interaction of Multiple Cylindrical Bubbles with Underwater Shock Wave[Refereed]International conference proceedings
- Springer Verlag, Apr. 2018, Journal of Visualization, Volume 21(Issue 5) (Issue 5), 1 - 16, English[Refereed]Scientific journal
- Elsevier B.V., Apr. 2018, Ultrasonics Sonochemistry, 42, 541 - 550, English[Refereed]Scientific journal
- Mar. 2018, 平成29年度衝撃波シンポジウム, 1 - 4, JapaneseEstimation of locations of rebound shock wave generation in cavitation jet flowSymposium
- Oct. 2017, Proceedings of the International Symposium on Marine Engineering (ISME2017 TOKYO), 1 - 6, EnglishSterilization Effects on a Marine Bacterium using Underwater Shock Waves with Induced Bubbles in a Cylindrical Water Chamber[Refereed]International conference proceedings
- Jul. 2017, Proceeding of 31th International Symposium on Shock Waves, Nagoya, Japan, 1 - 6, EnglishStrength and Frequency of Underwater Shock Waves Related to Sterilization Effects on a Marine Bacterium[Refereed]International conference proceedings
- Jul. 2017, Proceeding of 31th International Symposium on Shock Waves, Nagoya, Japan, 1 - 6, EnglishGeneration Frequency of Rebound Shock Waves from Bubble Collapses in Cavitation Jet[Refereed]International conference proceedings
- Springer International Publishing, Jul. 2017, Proceedings of 31th International Symposium on Shock Waves, Nagoya, Japan, 1 - 6, English[Refereed]International conference proceedings
- Mar. 2017, 平成28年度衝撃波シンポジウム講演論文集, 3C1-2, 1 - 4, Japaneseキャビテーション噴流中の衝撃波発生頻度に関する研究 -境界条件及びノズル形状が及ぼす影響-Symposium
- Mar. 2017, 平成28年度衝撃波シンポジウム講演論文集, 1D1-4, 1 - 5, JapaneseSterilization Effects on Marine Vibrio sp. under Different Conditions of Underwater Electric Discharges in a Cylindrical Water ChamberSymposium
- Mar. 2017, 平成28年度衝撃波シンポジウム講演論文集, 1B2-1, 1 - 5, JapaneseBOS 法における水中球状衝撃波による 背景画像変位の評価に関する研究Symposium
- Dec. 2016, JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, 21(4) (4), 679 - 688, English[Refereed]Scientific journal
- Oct. 2016, Proceedings of 7th PAAMES and AMEC2016, AMEC2016-4D3-072, 1 - 6, EnglishFundamental Study on Sterilization Effect of Underwater Shock Waves with Cavitation Bubbles on Marine Bacteria[Refereed]International conference proceedings
- Oct. 2016, Proceedings of 7th PAAMES and AMEC2016, AMEC2016-3C2-075, 1 - 4, EnglishExperimental Observation on Generation Frequency of Shock Waves in Cavitation Flow[Refereed]International conference proceedings
- Sep. 2016, JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, 21(3) (3), 385 - 395, English[Refereed]Scientific journal
- Mar. 2016, 平成27年度衝撃波シンポジウム, 2B1 - 3, EnglishPressure Measurement on Rebound Shock Wave of a Vapor Bubble using Background Oriented Schlieren MethodSymposium
- Oct. 2015, Proceedings of the 15th International Symposium on Advanced Fluid Information ICFD2015, 168 - 169, EnglishStudy on Improvement in Sterilization Effect of Shock Wave for Marine BacteriaInternational conference proceedings
- 日本マリンエンジニアリング学会, Oct. 2015, 第85回マリンエンジニアリング学術講演会, 147 - 148, EnglishEstimation of sterilization effect on marine bacteria using microbubble flow and shock waveResearch society
- Aug. 2015, JOURNAL OF VISUALIZATION, 18(3) (3), 437 - 447, English[Refereed]Scientific journal
- Mar. 2015, 平成26年度衝撃波シンポジウム講演論文集, 288 - 291, JapaneseStudy on underwater shock wave generation using a diaphragmless shock tube[Refereed]Symposium
- Nov. 2014, Proceedings of 3rd International Symposium on Marine Sciences, EnglishStudy on underwater shock wave generation using diaphragmless shock tube for application to ballast water treatment system[Refereed]International conference proceedings
- 公益社団法人 日本マリンエンジニアリング学会, Nov. 2014, 第84回(平成26年)マリンエンジニアリング学会学術講演会, 149 - 150, JapaneseStudy on the benefits of micro bubbles applied to shock sterilization of marine bacteriaResearch society
- Nov. 2014, Proceedings of 3rd International Symposium on Maritime Sciences, 197 - 201, EnglishNumerical Simulation of Shock Wave Bubble Interaction for Ballast Water TreatmentInternational conference proceedings
- Jul. 2014, Proc. 16th International Symposium on Flow Visualization, Okinawa, ISFV16 - 1048, EnglishThe generation of an underwater shock wave using elastic material connected to a diaphragmless shock wave generator[Refereed]International conference proceedings
- Jul. 2014, Proc. 16th International Symposium on Flow Visualization, Okinawa, ISFV16 - 1093, EnglishObservation and analysis of interactional phenomena between microbubbles and underwater shock wave[Refereed]International conference proceedings
- Jul. 2013, Proc. 29th International Symposium on Shock Waves, Madison, 246 - 000135, EnglishStudy on Excessive Pressure of Underwater Shock Wave Generated in Confined Space[Refereed]International conference proceedings
- Jul. 2013, Proc. 29th International Symposium on Shock Waves, Madison, 246 - 000047, EnglishRapid Opening Valve Assisted by Magnetic Force for a Diaphragmless Shock Tube[Refereed]International conference proceedings
- Jul. 2013, Proc. 29th International Symposium on Shock Waves, Madison, 246 - 000026, EnglishObservation and Analysis of Microbubble Motion Induced by An Underwater Shock Wave[Refereed]International conference proceedings
- Springer Berlin Heidelberg, Jan. 2013, Bubble Dynamics and Shock Waves, 339 - 362, English[Refereed]In book
- The Deepwater Horizon accident discharged a staggering amount of oil (about 780,000 kL) into the Gulf of Mexico. In other forecast simulations based on the ocean-only models, spilled oil reached the Atlantic Ocean via the Gulf Stream. In this study, the authors simulated 3-dimensional movement of oils using real-time oceanic and atmospheric conditions obtained by the coupled MSSG (Multi-Scale Simulator for the Geoenvironment) model. Our simulation shows that the amount of oil discharge into the Atlantic is very limited due to the trade winds. The atmospheric coupling to the ocean model is essential in the forecast simulation of spilled oils.The Japan Institute of Marine Engineering, Jan. 2013, Journal of The Japan Institute of Marine Engineering, Vol.48, No.1, pp.105-109(1) (1), 105 - 109, English[Refereed]Scientific journal
- 一般社団法人日本機械学会, 2013, Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 79(806) (806), 1973 - 1984, Japanese[Refereed]Scientific journal
- Jun. 2012, IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 22(3) (3), 3700404, English[Refereed]Scientific journal
- Mar. 2012, Proceedings of 28th International Symposium on Shock Waves, Manchester, Part9, pp.711-717High speed opening operation of diaphragmless shock wave generator[Refereed]International conference proceedings
- Mar. 2012, Proceedings of 28th International Symposium on Shock Waves, Manchester, Part12, pp.915-921Experimental study on inactivation of marine bacteria using electrodischarge shock waves[Refereed]International conference proceedings
- Mar. 2012, Proceedings of 28th International Symposium on Shock Waves, Manchester, Part12, pp.909-914, 909 - 914Analytical estimation of microbubble motion exposed to discontinuous pressure change[Refereed]International conference proceedings
- Japan Institute of Navigation, 2012, NAVIGATION, 180, 56 - 62, Japanese
- Oct. 2011, Proceedings of ISME KOBE 2011, C2-1Simulation of DEEPWATER HORIZON oil spill using coupled Atmosphere-Ocean model[Refereed]International conference proceedings
- Oct. 2011, Proc. 9th International Symposium on Marine Engineering, ISME2011-C1-5, EnglishInterface Tracking Simulation of Shock-Bubble Interaction in Ballast Water[Refereed]International conference proceedings
- Oct. 2011, Proceedings of ISME KOBE 2011, C1-2Experimental study on inactivation of marine bacteria using collapse of microbubbles induced by shock waves[Refereed]International conference proceedings
- Oct. 2011, Proceedings of ISME KOBE 2011, C1-3Development and performance evaluation of periodic underwater shock wave generator for shock sterilization of ballast water[Refereed]International conference proceedings
- Jul. 2011, Shock Waves, Vol.21, No.4, 331-339, 331 - 331Overpressure generation and repetition of collapsing microbubbles induced by shock wave reflection in a narrow gap[Refereed]Scientific journal
- Oct. 2010, Proceedings of Techno-Ocean 2010, Kobe, Japan, 14th Room2(3B), Environment IOil-Spill Simulation using Nested Global Atmosphere-Ocean Model[Refereed]International conference proceedings
- Oct. 2010, Proceedings of Techno-Ocean 2010, Kobe, Japan, 15th Room2(3B), Environment II, 81 - 86Observation and Pressure Measurement of Underwater Shock Waves for Application of Ship Ballast Water Treatment[Refereed]International conference proceedings
- Oct. 2010, Proceedings of Techno-Ocean 2010, 14-2-012, EnglishNumerical Simulation of Interaction between Shock Wave and Bubble in Ship Ballast WaterInternational conference proceedings
- Oct. 2010, Proceedings of Techno-Ocean 2010, Kobe, Japan, 15th Room2(3B), Environment IIHybrid Analysis of Microbubble Motion Excited by Shock Waves for Sterilization of Marine Bacteria[Refereed]International conference proceedings
- Kobe University, Jul. 2010, 神戸大学大学院海事科学研究科紀要, 第7号、pp.81-86, 81 - 86, JapaneseFundamental Study on A New Technology of Ship Ballast Water Treatment : Generation and Focusing of An Underwater Shock Wave and Numerical Analysis of Microbubble MotionScientific journal
- Japan Institute of Navigation, 2010, NAVIGATION, 175, 68 - 72, Japanese
- The Japan Society of Naval Architects and Ocean Engineers, Nov. 2009, Conference Proceedings The Japan Society of Naval Architects and Ocean Engineers, 9K, 35 - 36, Japanese
- Oct. 2009, International Symposium on Marine Engineering (ISME) 2009, CT-2, No.124, EnglishApplication of the Earth Simulator II for Conservation of Ocean Environment[Refereed]International conference proceedings
- Oct. 2009, International Symposium on Marine Engineering (ISME) 2009, DT-1, No.16, EnglishApplication of Shock Pressures Generated by Collapsing Microbubbles to Inactivation Treatment of Marine Bacteria in Ship Ballast Water[Refereed]Scientific journal
- Jul. 2009, 27th International Symposium on Shock Waves, 258, EnglishMeasurement and analysis of rebound shock pressure variations of micro-bubbles in a narrow chamber[Refereed]International conference proceedings
- May 2009, The Japan Institution of Marine Engineering, Vol. 44, No. 3, pp. 470-476, Japanese機関室へ汲み入れた海水及び機器内に滞留した海水中の海洋細菌数の変動[Refereed]Scientific journal
- Apr. 2009, Transactions of the Japan Society of Mechanical Engineers, 75巻・752号・B編・668-675, JapanesePressure Generation from Micro-Bubble Collapse at Shock Wave Loading[Refereed]Scientific journal
- 2009, SHOCK WAVES, VOL 2, PROCEEDINGS, pp.876-880, 875 - 880, EnglishStudy of mechanical and chemical effects induced by shock waves on the inactivation of a marine bacterium[Refereed]International conference proceedings
- Japan Society of Mechanical Engineers, 2009, Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 75(752) (752), 668 - 675, Japanese[Refereed]Scientific journal
- Nova Science Publishers, Inc., Feb. 2008, Environmental Microbiology Research Trends, 191 - 212, EnglishChanges of marine bacterial populations in a ship's ballast water and sediment, and application of shock pressures to complete killing of Vibrio sp. cells isolated from ballast waterIn book
- Aug. 2007, SHOCK WAVES, 17(1-2) (1-2), 143 - 151, English[Refereed]Scientific journal
- Jul. 2007, Proc. 26th International Symposium on Shock Waves, pp.869-874Study on application of shock waves generated by micro bubbles to the treatment of ships' ballast water[Refereed]International conference proceedings
- Apr. 2007, Bulletin of the Society of Sea Water Science, Japan, Vol. 61, No. 2, pp. 132-133(2) (2), 132 - 133, EnglishChanges in the Number of Colony-Forming Marine Vibrio sp. Cells After Exposure to Shock Pressures in the Presence of Sodium Ascorbate[Refereed]Scientific journal
- Oct. 2006, Transactions of the Japan Society of Mechanical Engineers, 72巻・722号・2418-2424, JapaneseStudy on Shock Wave Propagation under Saltwater Sealed in Aluminum Containers[Refereed]Scientific journal
- This paper reports the study on behavior phenomenon of shock waves in water sealed with an aluminum container numerically and experimentally. In the numerical study, the propagation of shock waves in the container is calculated by LS-DYNA using the Johnson-Cook model and the Tait equation. We observe the propagation phenomena of shock waves generated in water part of the container by elastic-plastic deformation of aluminum using the schlieren method. From these results, we examine the complicated propagation of shock waves in the target container.The Visualization Society of Japan, 2006, Transactions of Visualization Society of Japan, 26(2) (2), 139 - 140, Japanese
- Society for Antibacterial and Antifungal Agents Japan, 2006, Biocontrol Science, 11(4) (4), 159 - 166, English[Refereed]Scientific journal
- 2005, Shock Waves, Vols 1 and 2, Proceedings, No.2211, 1113 - 1118, EnglishDevelopment of the hybrid numerical simulation to clarify shock viscosity effects in a plastic shock wave front[Refereed]International conference proceedings
- The present study reports the theoretical and experimental research of the state in a shock wave front in aluminum. Fundamental equations are derived from thermodynamic theory for the steady flow involving viscosity and heat conduction. The states in a shock wave front, such as temperature, equilibrium stress and viscous stress distributions, are calculated using the equations. The effects are investigated of viscosity and heat conduction in shock front formation. In order to consider the relation between viscous stress and strain rate in a shock front the theoretical results are compared with the experimental data obtained by VISAR (Velocity Interferometer System for Any Reflector). These results make the useful information for analysis of the structure of shock fronts to build the new hybrid wave code using the present theoretical solutions.The Japan Society of Mechanical Engineers, Jun. 2004, Transactions of the Japan Society of Mechanical Engineers Series B, 70(694) (694), 818 - 823, Japanese
- In the present study we carry out the gas gun experiment and the numerical simulation to investigate the lethal effect of shock waves to a marine microorganism and behavior of waves in target containers. The marine Vibrio sp. that is isolated from ship's ballast water is used. After the impact, Vibrio sp. is cultivated for 24 hours at 30 degrees. The shock pressure effect is judged by the number of colony in agar plates. The pressure in a container is measured by the piezo-electric film gauge. We can get 2.5 kbars shock pressure in a small type container and realize 99.99% of lethal rate. On the other hand, the pressure propagation phenomena in the container are calculated by the LS-DYNA. From the comparison between experimental result and numerical one we examine the generation process of high pressure in the container.The Japan Society of Mechanical Engineers, 2004, The proceedings of the JSME annual meeting, 2004, 43 - 44, Japanese
- 2004, EXPLOSION, SHOCK WAVE AND HYPERVELOCITY PHENOMENA IN MATERIALS, 465-466(466) (466), 151 - 156, EnglishStudy on the state in a steady shock front propagating in aluminum materialsScientific journal
- The present study reports the experimental research of particle velocity increasing process generated by elastic-plastic shock waves in 6061-T6 aluminum. Planar impact experiments are carried out by a single-stage light-gas gun. The gun has 2 m long launch tube and 40 mm muzzle diameter. Projectiles are made of ABS material, and accelerated by high-pressure gas (He). Impact velocities measured by the magnet flyer method are from 227 to 413 m/sec. A target plate is hold in a target ring with 4 tilt-pins. Tilt angles obtained by any shots are from 2.4 to 3.6 mrad. The velocity changes at the rear surface of target plate are measured by the velocity interferometer system (VISAR). High-resolution data focused in the plastic shock wave are obtained, and it is shown that those data can be compared to the results of estimating simulation of the shock wave profiles.The Japan Society of Mechanical Engineers, 2003, 日本機械学会論文集(A編), 69巻,682号,pp.1028-1032(682) (682), 1028 - 1032, JapaneseScientific journal
- 2002, American Society of Mechanical Engineers, Petroleum Division (Publication) PD, 1, 191 - 198, English[Refereed]International conference proceedings
- In the present study, improvement of numerical simulation code for the prediction of shock wave rise times developed by Swegle and Grady is carried out using equilibrium (thermoelastic) stress. The thermoelastic stress is obtained from Inside Temperature (IT) method for estimating temperatures in steady shock wave fronts established by Sano and Abe. In addition, use of the artificial viscous stress is limited conditionally in order to examine effects of the real shock viscous stress in our numerical calculation. The results of our improved simulation for 6061-T6 Al shocked below 9 GPa are compared with experimental results, and obtained good agreements. While, the effect of the viscous stress determined from the thermoelastic stress in the present method shows little differences from the Swegle-Grady method.The Japan Society of Mechanical Engineers, Oct. 2001, Transactions of the Japan Society of Mechanical Engineers Series B, 67(662) (662), 1675 - 1679, Japanese
- Heat wave in elastic material generated by an impulsive heating of the free surface is analyzed numerically in order to clarify the mechanism of a rapid alloying technology. The TVD finite difference scheme is applied for the present study to catch the discontinuous thermal waves clearly. The present numerical scheme is justificable from the results of behavior of heat waves propagated through Al metal. In addition, the propagation of heat wave through a contact boundary between two different metals, Al and Ni, is examined. The numerical results suggest that the possibility of direct contribution of heat wave to the most part of Al-Ni alloy is denied, but complicated variations of temperature are occurred at the interface. These results indicate that analyses including a phase transition phenomenon are required.The Japan Society of Mechanical Engineers, Jul. 2001, Transactions of the Japan Society of Mechanical Engineers Series B, 67(659) (659), 1230 - 1234, Japanese
- 2001, ASME ETCE2001, Symp. Composite Materials Design & Analysis, ETCE2001 - 17150, EnglishTheory for estimating temperatures in steady wave fronts[Refereed]International conference proceedings
- 2001, IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 857 - 862, EnglishNumerical analysis of thermal shock wave applied to metal alloying processInternational conference proceedings
- 2001, ASME ETCE2001, Symp. Composite Materials Design & Analysis, ETCE2001 - 17148, EnglishInefficacy of evaluation of temperatures in overdriven steady wave fronts using thermoelastic theory[Refereed]International conference proceedings
- Jan. 2001, JOURNAL OF APPLIED PHYSICS, 89(1) (1), 105 - 114, EnglishEstimate of temperature distributions in steady-plane-wave fronts using a Hugoniot function[Refereed]Scientific journal
- 2001, IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 863 - 868, EnglishEstimate of shock front profiles using thermo-elastic stressesInternational conference proceedings
- In the Previous study, two Inside Temperature (IT-a and IT-b) methods for estimating the temperature distributions in steady wave fronts in a thermo-viscous material were established and the IT-b method was shown qualitatively to be effective if the effect of viscosity was distinguished. In this paper, these two methods are applied to the shock compressions of Yittria-doped Tetragonal Zirconia (YTZ) that is a thermo-viscous material with a multiple shock Hugoniot. The YTZ Hugoniot consists of three partial curves including two kinks, that are the Hugoniot Elastic Limit (HEL)and the phase transition point. The shock temperatures evaluated by the IT-b method were close to the accurate temperatures obtained by the Shock-Temperature method in the whole stress range to 140 GPa examined here. Furthermore, the inside temperature distributions were approximately accurate because the effect of viscosity was distinguished in the shock compression. By these facts, it was considered that the fundamental assumption and the assumption on heat transport used in the IT-b method were valid and as a result, this method was effective. In addition, the influences of heat transport on the temperatures and thermo-elastic stresses were examined.The Japan Society of Mechanical Engineers, Sep. 2000, Transactions of the Japan Society of Mechanical Engineers Series B, 66(649) (649), 1771 - 1777, Japanese
- Two methods (IT-a and IT-b methods) for estimating temperatures in steady wave fronts in a thermo-viscous material are established. To this end, two irreversible thermodynamic equations for the temperature in the wave front are derived under the fundamental assumption that the material in the wave front is approximately in an equilibrium state. In addition, heat transport is neglected in the IT-a method, while in the IT-b method, the work done by the thermal stress is offset by heat transport. The two equations are connected with the Hugoniot function and the Mie-Gruneisen equation, respectively. The efficacy of the two methods is examined qualitatively by three temperature distributions estimated qualitatively using three equations for entropy which include no assumption on heat transport, the assumption used in the IT-a method, and that in the IT-b method, respectively. These three distributions suggest that the temperatures are overestimated by the IT-a method, while the IT-b method is effective if the effect of viscosity is distinguished.The Japan Society of Mechanical Engineers, Sep. 2000, Transactions of the Japan Society of Mechanical Engineers Series B, 66(649) (649), 1765 - 1770, Japanese
- Heat wave in elastic material generated by an impulsive heating of the free surface is analyzed numerically by the TVD finite difference scheme. The thermal response of Al metal for a thermal shock is examined through behavior of heat wave. In addition, the propagation of heat wave through a contact boundary between two different metals, Al and Ni, is examined. The numerical results suggest that heat wave plays an important role in an initiation of Ni-Al alloying by an electric resistance welding technique.The Japan Society of Mechanical Engineers, 2000, Proceedings of the 1992 Annual Meeting of JSME/MMD, 2000, 751 - 752, Japanese
- Jan. 1999, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 85(1-3) (1-3), 162 - 165, EnglishNumerical simulation of the plastic flow field near the bonding surface of explosive welding[Refereed]Scientific journal
- Jan. 1999, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 85(1-3) (1-3), 158 - 161, EnglishMeasurement of free surface velocities of copper plates by interferometer[Refereed]Scientific journal
- 1998, ASME ETCE'98, Symp. Composite Materials Design & Analysis, 4598 - 4608, EnglishInaccuracy caused by the use of thermodynamic equation inside shock wave front[Refereed]International conference proceedings
- Aug. 1997, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 40(3) (3), 395 - 401, EnglishNumerical study of the mechanism of wavy interface generation in explosive welding[Refereed]Scientific journal
- Wavy interface generation is an interesting characteristic of explosive welding. There have been many theoretical and experimental discussions of the mechanism of wavy interface generation, but there is no consensus of opinion as yet. We report a numerical approach to the analysis of the mechanism of interface wave generation in explosive welding. The phenomena of the interface wave generation are calculated using a two-dimensional finite difference scheme for elastic-plastic materials. In this simulation the equations for a symmetric collision between copper plates are solved. The concept behind this study is that the wavy interface and vortex streets are caused by the velocity distribution of shear flow and periodic disturbances at the interface. The calculation results show the deformation process of the wavy interface and we obtain qualitative agreements between numerical and experimental results.The Japan Society of Mechanical Engineers, 1996, Transactions of the Japan Society of Mechanical Engineers Series C, 62(599) (599), 2626 - 2631, Japanese
- 1992, LASER INTEROMETRY IV : COMPUTER-AIDED INTERFEROMETRY, 1553, 418 - 426, EnglishHOLOGRAPHIC INTERFEROMETRIC OBSERVATION OF SHOCK-WAVE PHENOMENA[Refereed]International conference proceedings
- 1992, Proc. 18th International Symposium on Shock Waves, 209 - 212, EnglishThree dimensional flow structure behind a shock wave discharged from a rectangular cross section shock tubeInternational conference proceedings
- In the present paper, holographic interferometry was applied to visualize of three dimensional shock wave phenomena. One of the examples is a shock wave discharged from the open end of a square cross sectional shock tube. The experiments were conducted in 40mm×40mm cross sectional shock tube. Double exposure diffuse holographic interferometry was used for the flow visualization. The three dimensional shock configulation and the three dimensional flow behind the shock wave can be clearly observed. Other three dimensional observations in shock tube flows are also shown.The Visualization Society of Japan, 1991, Transactions of Visualization Society of Japan, 11(1) (1), 147 - 148, Japanese
- May 1990, JSME INTERNATIONAL JOURNAL SERIES II-FLUIDS ENGINEERING HEAT TRANSFER POWER COMBUSTION THERMOPHYSICAL PROPERTIES, 33(2) (2), 216 - 223, EnglishNUMERICAL-SIMULATION AND DENSITY-MEASUREMENT OF A SHOCK-WAVE DISCHARGED FROM THE OPEN END OF A SHOCK-TUBE[Refereed]Scientific journal
- 1990, Proc. Intl. Symp. on Computational Fluid Dymanics, 952 - 957, EnglishShock wave refraction at air/water interface[Refereed]International conference proceedings
- 独立行政法人航空宇宙技術研究所, 1990, Proceedings of the 8th NAL Symposium on Aircraft Computational Aerodynamics, 14, 203 - 208, EnglishNumerical simulation of shock wave emanating from a square shock tubeInternational conference proceedings
- 1990, Adiabatic Waves in Liquid-Vapor Systems IUTAM Symposium, 91 - 100, EnglishInteraction of underwater shock waves with air bubbles[Refereed]International conference proceedings
- 1990, Proc. the 1989 National Symp. on Shock Wave Phenomena, 41 - 53, EnglishA peculiar shape in transition process of a shock wave discharged from an open end of a shock tube[Refereed]International conference proceedings
- The present paper reports a visualization study and a numerical simulation of the shock wave discharged from the open end of a shock tube. The three-dimensional shock wave flow is quantitatively visualized using double exposure holographic interferometry. In order to obtain the three-dimensional isopycnics behind the shock wave, a data evaluation process was described. The TVD finite difference scheme was applied to this problem. The experimental result was compared with the numerical result. A good agreement was obtained between them. The micro point explosions were conducted to verify the assumption of the present method that the collimated light was scarcely deviated at spherical shock fronts.The Japan Society of Mechanical Engineers, 1989, Transactions of the Japan Society of Mechanical Engineers Series C, 55(511) (511), 733 - 740, Japanese
- 1989, Proc. the 1988 National Symp. on Shock Wave Phenomena, 41 - 56, EnglishSpherical shock waves from the open end of a shock tube[Refereed]International conference proceedings
- 1989, Proc.17th International Symposium on Shock Waves, 270 - 275, EnglishShock wave diffraction from the open end of a shock tubeInternational conference proceedings
- 1988, 9th International Symposium on Jet Cutting Technology, 641 - 650, EnglishHolographic interferometric observation of underwater shock wave with air bubblesInternational conference proceedings
- The present paper reports the visualization study of the initiation of a shock wave generated by a rebounding bubble and a micro-jet induced when the bubble is collapsed. The underwater spherical shock wave is obtained by using a 10 mg silver azide(AgN3) pellet, and visualized by using double exposure holographic interferometry. In order to understand the quantitative properties of this phenomenon, the density and pressure distributions were evaluated by measuring the interference fringes and using Tait equation. Consequently, the sudden pressure change when the shock wave is generated by the rebounding bubble and the structure of the micro-jet were clarifiedTHE VISUALIZATION SOCIETY OF JAPAN, 1987, Journal of the Visualization Society of Japan, 7, 75 - 80, Japanese
- Lead, Mar. 2025, 2024年度衝撃波シンポジウム講演論文集Study on Propagation of Underwater Waves and Behavior of Bubbles Generated by Impact of Metal Rods
- Last, Mar. 2025, 2024年度衝撃波シンポジウム講演論文集Shock Wave Generation Characteristics of Cavitation Jet Induced by Electric Discharge
- Mar. 2025, 2024年度衝撃波シンポジウム講演論文集Shock Wave Generation in Cavitation Jet Flows Confined by Plates
- Lead, The Japan Institute of Marine Engineering, 01 Jul. 2024, Marine Engineering, 59(4) (4), 491 - 495, Japanese[Invited]Introduction scientific journal
- 2016, 衝撃波シンポジウム講演論文集(CD-ROM), 2015水中気泡と衝撃波の相互作用に関する数値計算
- 2014, 混相流シンポジウム講演論文集(CD-ROM), 2014VOF法に基づく圧縮性気液二相流の数値解析
- 日本混相流学会, Mar. 2013, 混相流, 27(1) (1), 45 - 52, JapaneseApplication of Microbubbles and Shock Pressures to Ship's Ballast Water Treatment[Invited]Introduction scientific journal
- 日本船舶海洋工学会, Nov. 2011, 日本船舶海洋工学会講演会論文集, (13) (13), 315 - 318, JapaneseFundamental Research on Method of Creating Underwater Shock Waves for Ballast Water Treatment
- Japan Institute of Navigation, Jul. 2011, 日本航海学会誌NAVIGATION(特集), 177号, pp.43-47, 43 - 47, JapaneseIntroduction scientific journal
- The present paper reports on the development of a new technique of marine bacteria sterilization of ship ballast water using underwater shock waves. The interactions between microbubbles and shock waves are utilized in the proposed technique. The contraction and expansion motion of microbubbles provide biochemical and mechanical sterilization effects by means of free radicals and shock wave pressures. Theoretical and experimental approaches to the development of the present technique are described. The examination of optimum conditions for higher rebound-pressure generation from microbubbles, the observation and pressure measurements in the interaction field between microbubbles and shock waves, the performance of a unique shock wave generator and the bio-experiments with the present technique are featured in this paper.The Japan Institute of Marine Engineering, Jul. 2011, 日本マリンエンジニアリング学会誌, 第46巻第4号, pp.72-77(4) (4), 549 - 554, JapaneseIntroduction scientific journal
- Japan Institute of Navigation, Jul. 2011, NAVIGATION(特集), 177(177) (177), 48 - 51, JapaneseIntroduction scientific journal
- 2011, 日本船舶海洋工学会講演会論文集(CD-ROM), (13) (13)バラスト水中気泡と衝撃波の相互作用に関する数値解析
- 2010, マリンエンジニアリング学術講演会講演論文集, 80th衝撃圧を利用するバラスト水処理技術に関する基礎研究
- 2010, 日本船舶海洋工学会講演会論文集(CD-ROM), (10) (10)大気海洋モデルを用いた油流出の数値計算
- 2010, 日本船舶海洋工学会講演会論文集(CD-ROM), (10) (10)水中衝撃波の収束と微小気泡群を用いたバラスト水処理技術の開発:第二報
- Japan Institute of Navigation, 2010, NAVIGATION, 175号, pp.73-77, 73 - 77, JapaneseIntroduction scientific journal
- Dec. 2009, NAVIGATION, 172号・33-36, JapaneseStudy of developing new technology on ballast water treatmentReport scientific journal
- Oct. 2009, Japanese Journal of Multiphase Flow, 23巻・3号・305-314, JapaneseInnovation of system for reliability and safety on overseas transportationIntroduction scientific journal
- 2009, 日本船舶海洋工学会講演会論文集, (9K) (9K)水中衝撃波の収束と微小気泡群を用いたバラスト水処理技術の開発
- 15 Mar. 2007, 衝撃波シンポジウム講演論文集, 2006, 305 - 308, Japanese微小気泡崩壊に伴う衝撃波の海洋細菌不活性化効果に関する研究
- 2007, マリンエンジニアリング学術講演会講演論文集, 77th, 51 - 52, Japanese塩水中のマイクロバブル挙動に関する考察
- 30 Oct. 2006, 高圧討論会講演要旨集, 47th, 136, Japanese海洋細菌に与える衝撃圧力の不活性化効果に関する研究
- This paper reports the experimental study on behavior and collapse of micro-nano bubbles to develop a new ballast water treatment technology. The experimental flow system is composed of flow channels, a cooler tank, a pump, a micro-nano bubble generator, and an ultrasonic wave generator. The inactivation effect of marine bacteria of this system is checked by the colony counting method. The effect is related with the collapse of micro-nano bubbles by ultrasonic waves. The schlieren method is carried out to observe the collapse phenomena of micro-nano bubbles in the flow channel. As a result, shock waves are observed around bubbles, and it is found that the collapse of bubbles contribute to the inactivation of the marine bacteria.The Visualization Society of Japan, Sep. 2006, 可視化情報学会誌, 26(Suppl.2) (Suppl.2), 111 - 112, Japanese[Refereed]
- 16 Mar. 2006, 衝撃波シンポジウム講演論文集, 2005, 377 - 380, Japanese衝撃圧力波形と海洋細菌の殺菌効果に関する考察
- 日本マリンエンジニアリング学会, 01 Feb. 2005, Marine engineering, 40(2) (2), 110 - 115, JapaneseShock Compression of Marine Bacterial Cells Enclosed in Aluminum Container
- Development of a Hybrid Numerical Simulation Method to Clarify Structures in Shock Wave Fronts : Experimental Measurements of Particle Velocity Change at Elastic-Plastic Shock Wave FrontsThe present paper reports experimental measurements of particle velocity change at elastic-plastic shock wave fronts to estimate a hybrid numerical prediction method of particle velocity variation with shock wave propagation in metals. The elastic and plastic shock waves are generated in 6061-T6 aluminum by planer impact experiments using a single-stage light-gas gun that has 40mm muzzle diameter. Impact angles are also checked on using 4-pin-sensor system, and the particle velocity variations at the rear surface of target plates are measured by a velocity interferometer system (VISAR). High-resolution measurements on the plastic shock wave front are carried out, and detailed experimental data that are needed for evaluating the estimating simulation of the shock wave profile are obtained.The Japan Society of Mechanical Engineers, 10 Oct. 2002, Proceedings of the ... annual meeting of JSME/MMD, 2002, 697 - 698, Japanese
- 可視化情報学会, 01 Jul. 2002, Journal of the Visualization Society of Japan, 22, 417 - 420, JapaneseObservation of Rising Particle Velocity Profile of Shock Wave Front in 6061-T6 Aluminum
- Kobe University, Jul. 2002, Review of Kobe University of Mercantile Marine. Part II, Maritime studies, and science and engineering, 50, 67 - 72, JapaneseMeasurement of the impact angle of projectile launched by single stage light gas gun
- Numerical Prediction of Particle Velocity Variation with Shock Wave in MetalsThe present study reports the numerical prediction method of particle velocity variation with shock wave propagation in metals. The key of the present method is evaluation of the shock viscous stress in the shock wave front. The shock viscous stress is calculated from equilibrium stress obtained by the estimate method of temperature inside shock wave front developed by Sano & Abe. The shock viscosity is incorporated into a one-dimensional finite difference wave code. The present calculation is executed for 6061-T6 aluminum and iron, and these results are compared with experimental data. The present results show that it can reproduce more accurately the particle velocity variations on the shock wave fronts in 6061-T6 aluminum and iron.The Japan Society of Mechanical Engineers, 2002, 関西支部講演会講演論文集, 2002(77) (77), "10 - 45"-"10-46", Japanese
- 日本塑性加工学会, 25 Nov. 2001, 塑性と加工, 42(490) (490), 57 - 61, JapaneseInfluence of Die-Wall Friction and Internal Energy Dissipation on Final Mean Density in Multilayer Powder Compaction - Multishock Compaction of a Copper Powder Medium in a Die by Punch Impact VII -
- Kobe University, Jul. 1998, Review of Kobe University of Mercantile Marine. Part II, Maritime studies, and science and engineering, 46, 59 - 64, JapaneseFree Surface Velocity Measurement of Copper Plate by VISAR
- Kobe University, Jul. 1997, Review of Kobe University of Mercantile Marine. Part II, Maritime studies, and science and engineering, 45, 59 - 63, JapaneseMeasurement and Analysis of Projective Velocities by Single Stage Light Gas Gun
- Kobe University, Jul. 1996, Review of Kobe University of Mercantile Marine. Part II, Maritime studies, and science and engineering, 44, 31 - 36, JapaneseStudy on Interface Behavior in Explosive Welding Process
- Deformation Problems of Gas Interfaces of Defferent Densities Generated by Shock Waves (Light/Heavy Interface)This paper reports numerical and analytical studies of the interaction problem between a gas interface of different densities and shock waves. The interface is formed between air and SF6 (light/heavy interface, i. e., the incident shock wave propagates from air to SF6), and there is a sinusoidal perturbation on the initial interface. The interface deformation process and the growth rate of a sinusoidal perturbation on the interface are investigated after shock wave interaction. Numerical simulation is carried out using the second-order TVD finite difference scheme, and the Euler equations are solved. Theoretical impulsive growth rate obtained using the stable velocities on the interface after shock interaction is compared with results of the numerical simulation. In the case of incident shock Mach numbers Ms < 2 and amplitudes of perturbed interface η_0k < 1, good agreement is obtained.The Japan Society of Mechanical Engineers, 25 Apr. 1995, Transactions of the Japan Society of Mechanical Engineers. Series B., 61(584) (584), 1246 - 1251, Japanese
- Kobe University, Jul. 1994, Review of Kobe University of Mercantile Marine. Part II, Maritime studies, and science and engineering, 42, 53 - 58, JapaneseStudy of the Interaction between the Interface formed with Different Gases and Shock Waves
- Flow Structure behind a Shock Wave Discharged from a Square Cross Section Shock TubeThe structure and behavior of a vortex ring and secondary shock waves which were generated behind the shock wave discharged from the open end of a square cross section shock tube were investigated experimentally and numerically. Double exposure diffuse holographic interferometry was used to observe this complicated three dimensional shock wave phenomenon. This diffuse holographic interferometric visualization is particularly useful to understand three dimensional flow. The TVD finite difference numerical simulation was carried out by solving the three dimensional unsteady Euler equations. A comparison was made between experimental results and computational results. These results clarified the generation and the transformation of the vortex ring and the behavior of three dimensional secondary shock waves.The Japan Society of Mechanical Engineers, May 1992, Transactions of the Japan Society of Mechanical Engineers. Series B., 58(549) (549), p1413 - 1418, Japanese
- Others, (株)エヌ・ティー・エス, Aug. 2014, Japanese, ISBN: 9784860434076微細気泡の最新技術Vol.2−進展するマイクロ・ナノバブルの基礎研究と拡がる産業利用ーScholarly book
- Others, Springer Berlin Heidelberg, Apr. 2013, English, In this chapter, applied research on microbubble dynamics induced by shock waves is presented for the sterilization treatment of marine bacteria contained in ships’ ballast water. Destruction of the marine ecosystem caused by sea creatures carried in ships’ ballast water to different seas is a serious global issue in the field of maritime sciences. Therefore, we propose a new sBubble Dynamics and Shock Waves, Shock Wave Science and Technology Reference Library Vol. 8 (Chapter 11: Sterilization of Ships’ Ballast Water)Scholarly book
- Joint work, Nova Science Publishers, Inc., 2007, EnglishCHANGES OF MARINE BACTERIAL POPULATIONS IN A SHIP’S BALLAST WATER AND SEDIMENT, AND APPLICATION OF SHOCK PRESSURES TO COMPLETE KILLING OF VIBRIO SP. CELLS ISOLATED FROM BALLAST WATER. In: Environmental Microbiology Research Trends, G. V. Kurladze Ed.Scholarly book
- 第92回(令和4年)マリンエンジニアリング学術講演会, Oct. 2022, Japanese洋上風車パイル打設時の水中騒音発生メカニズムに関する研究Oral presentation
- 第92回(令和4年)マリンエンジニアリング学術講演会, Oct. 2022, Japanese付着物除去効果向上のためのキャビテーション噴流挙動の観測と解析Oral presentation
- 2020年度衝撃波シンポジウム, Mar. 2021, JapaneseStudy on shock wave generation and erosion of cavitating jet produced by different orificesOral presentation
- 2020年度衝撃波シンポジウム, Mar. 2021, JapaneseNumerical prediction of OH radical chemosynthesis with interaction between microbubbles and an underwater shock waveOral presentation
- 2020年度衝撃波シンポジウム, Mar. 2021, JapaneseExperimental study on the generation of underwater shock waves by penetrating a projectile into waterOral presentation
- The Symposium on Shock Waves in Japan, FY2019, Mar. 2020, JapaneseNumerical prediction of the amount of OH radical produced with the collapse of microbubbles induced by an underwater shockwaveOral presentation
- The Symposium on Shock Waves in Japan, FY2019, Mar. 2020Fundumental study on underwater shock wave generation using a diaphragmless shock tubePoster presentation
- The Symposium on Shock Waves in Japan, FY2019, Mar. 2020, JapaneseStudy on Shock Waves and Erosion Generated by Cavitation Jet with Different Incident AnglesPoster presentation
- 第89回マリンエンジニアリング学術講演会, Oct. 2019, Japanese付着粒子状物質に対するキャビテーション噴流の除去効果に関する研究Oral presentation
- The 32nd Intl. Symp. Shock Waves (ISSW32), Jul. 2019, EnglishStudy on Relationship between Genertion of Underwater Shock Waves and Erosion in Cavitating FlowOral presentation
- 平成30年度衝撃波シンポジウム, Mar. 2019, Japanese, 横浜国立大学, Domestic conferenceキャビテーション噴流中のリバウンド衝撃波の船底付着物除去効果に関する研究Poster presentation
- 第88回マリンエンジニアリング学術講演会, Oct. 2018, Japanese, 岡山コンベンションセンター(岡山), Domestic conferenceキャビテーション噴流の壊食に及ぼす水中衝撃波の効果に関する研究Oral presentation
- 平成29年度衝撃波シンポジウム, Mar. 2018, Japanese, 東北大学流体科学研究所, Domestic conferenceEstimation of locations of rebound shock wave generation in cavitation jet flowPoster presentation
- 平成28年度衝撃波シンポジウム講演論文集, 2017, Japanese, Domestic conferenceキャビテーション噴流中の衝撃波発生頻度に関する研究 -境界条件及びノズル形状が及ぼす影響-Oral presentation
- 平成28年度衝撃波シンポジウム講演論文集, 2017, English, Domestic conferenceSterilization Effects on Marine Vibrio sp. under Different Conditions of Underwater Electric Discharges in a Cylindrical Water ChamberOral presentation
- 平成28年度衝撃波シンポジウム講演論文集, 2017, Japanese, Domestic conferenceBOS 法における水中球状衝撃波による 背景画像変位の評価に関する研究Oral presentation
- 2015年度衝撃波シンポジウム, Mar. 2016, Japanese, Kumamoto, Domestic conferenceNumerical Simulation of Interaction between Bubble and Shock Wave in WaterOral presentation
- Proceedings of 7th PAAMES and AMEC2016, 2016, English, International conferenceFundamental Study on Sterilization Effect of Underwater Shock Waves with Cavitation Bubbles on Marine BacteriaOral presentation
- Proceedings of 7th PAAMES and AMEC2016, 2016, English, International conferenceExperimental Observation on Generation Frequency of Shock Waves in Cavitation FlowOral presentation
- 平成26年度衝撃波シンポジウム, Mar. 2015, Japanese, 群馬県渋川市, Domestic conferenceStudy on underwater shock wave generation using a diaphragmless shock tubeOral presentation
- 第84回(平成26年)マリンエンジニアリング学術講演会, Nov. 2014, Japanese, 海峡メッセ下関, Domestic conferenceStudy on the benefits of microbubbles applied to shock sterilization of marine bacteriaOral presentation
- 16th International Symposium on Flow Visualization, Jul. 2014, English, Okinawa, International conferenceThe generation of an underwater shock wave using elastic material connected to a diaphragmless shock wave generatorOral presentation
- 16th International Symposium on Flow Visualization, Jul. 2014, English, Okinawa, International conferenceObservation and analysis of interactional phenomena between microbubbles and underwater shock waveOral presentation
- 平成25年度衝撃波シンポジウム, Mar. 2014, Japanese, 青山学院大学相模原キャンパス, Domestic conferenceEstimation of Sterilizing Potential using Rebound Shock Waves of Microbubbles for Ship Ballast Water TreatmentOral presentation
- 29th International Symposium on Shock Waves, Jul. 2013, English, University of Wisconsin-Madison Memorial Union, International conferenceStudy on excessive pressure of underwater shock wave generated in confined spaceOral presentation
- 29th International Symposium on Shock Waves, Jul. 2013, English, University of Wisconsin-Madison Memorial Union, International conferenceRapid opening valve assisted by magnetic force for a diaphragmless shock tubeOral presentation
- 29th International Symposium on Shock Waves, Jul. 2013, English, University of Wisconsin-Madison Memorial Union, International conferenceObservation and analysis of microbubble motion induced by an underwater shock waveOral presentation
- 平成24年度衝撃波シンポジウム, Mar. 2013, Japanese, 北九州国際展示場, Domestic conferenceDevelopment of diaphragmless shock tube assisted by magnetic force for ship ballast water treatmentOral presentation
- 平成23年度衝撃波シンポジウム, Mar. 2012, Japanese, 東京大学柏キャンパス, Domestic conferenceHigh-speed opening operation and performance evaluation of the diaphragmless shock tubeOral presentation
- 平成23年度衝撃波シンポジウム, Mar. 2012, Japanese, 東京大学柏キャンパス, Domestic conferenceInactivation of marine bacteria by interaction between microbubbles and shock wavesOral presentation
- 平成23年度衝撃波シンポジウム, Mar. 2012, Japanese, 東京大学柏キャンパス, Domestic conferenceObservation of shock interaction with a microbubble under spatial position controlOral presentation
- 日本船舶海洋工学会/関西支部平成23年秋季講演会, Nov. 2011, Japanese, 神戸市産業振興センター, Domestic conferenceFundamental Research on Method of Creating Underwater Shock WavesOthers
- 日本機械学会関西支部第163回流体工学懇話会, Jul. 2011, Japanese, 大阪市立大学梅田サテライトキャンパス, Domestic conference海事科学分野における衝撃波応用技術についてInvited oral presentation
- 平成22年度「衝撃波学際応用寄附研究部門」成果発表講演会, Jun. 2011, Japanese, 東北大学流体科学研究所, Domestic conference海事科学分野における衝撃波応用Invited oral presentation
- 平成22年度衝撃波シンポジウム, Mar. 2011, Japanese, 青山学院大学, Domestic conferenceMicroscopic Visualization and Pressure Measurements of Bubble Collapse induced by Underwater Shock WavesOral presentation
- 平成22年度衝撃波シンポジウム, Mar. 2011, Japanese, 青山学院大学, Domestic conferencePerformance Evaluation of Diaphragmless Shock Tube with a Vertical Opening ValveOral presentation
- 平成22年度衝撃波シンポジウム, Mar. 2011, Japanese, 青山学院大学, Domestic conferenceExperimental Verification of Inactivation of Marine Bacteria using Shock Waves Created by Collapse of MicrobubblesOral presentation
- 第80回マリンエンジニアリング学術講演会, Sep. 2010, Japanese, 新潟朱鷺メッセ, Domestic conference衝撃圧を利用するバラスト水処理技術に関する基礎研究Oral presentation
- 日本船舶海洋工学会春季講演会, Jun. 2010, Japanese, タワーホール船堀, Domestic conferenceOil-Spill Simulation using Atmosphere-Ocean General Circulation ModelOral presentation
- 日本船舶海洋工学会, May 2010, Japanese, 東京船堀, Domestic conferenceDevelopment of Ballast Water Treatment Technology using Underwater Shock Wave Focusing and Microbubbles: 2nd ReportOral presentation
- The 6th International symposium on Gas Transfer at Water Surface, May 2010, English, 京都ガーデンパレス, International conferenceDevelopment of Oil-Spill Simulation System based on the Global Ocean-Atmosphere ModelOral presentation
- H21年度衝撃波シンポジュウム, Mar. 2010, Japanese, 埼玉大学, Domestic conferenceApplication of Underwater Conversing Shock Wave to Ship Ballast Water TreatmentOral presentation
- 平成21年日本船舶海洋工学会関西支部秋季講演会, Nov. 2009, Japanese, 大阪大学コンベンションセンター, Domestic conferenceDevelopment of Ballast Water Treatment Technology using Underwater Shock Wave Focusing and MicrobubblesOthers
- 日本船舶海洋工学会秋季講演会, Nov. 2009, Japanese, 大阪大学コンベンションセンター, Domestic conferenceDevelopment of Oil-Spill Simulation System based on the Global Ocean General Circulation ModelOral presentation
- 平成20年度衝撃波シンポジウム, Mar. 2009, Japanese, 衝撃波研究会, 名古屋大学, Domestic conferenceShock interaction and pressure generation of micro-bubblesOral presentation
- 平成20年度衝撃波シンポジウム, Mar. 2009, Japanese, 衝撃波研究会, 名古屋大学, Domestic conferencePressure measurement in a water container impacted by a projectilePoster presentation
- 2009年春季第56回応用物理学関係連合講演会:衝撃応用研究グループ企画 「科学技術としての衝撃応用とその拡がり」, Mar. 2009, Japanese, 日本応用物理学会, 筑波大学, Domestic conferenceApplication of shock waves to inactivation of marine bacteria in ship ballast water[Invited]Invited oral presentation
- 平成19年度衝撃波シンポジウム, Mar. 2008, Japanese, 東京工業大学大岡山キャンパス, Domestic conferenceStudy on generation of shock waves in a water container impacted by a projectilePoster presentation
- 平成19年度衝撃波シンポジウム, Mar. 2008, Japanese, 東京工業大学大岡山キャンパス, Domestic conferenceStudy on generation of shock waves in a water container impacted by a projectileOral presentation
- 第77回マリンエンジニアリング学術講演会, Oct. 2007, Japanese, Kobe University, Domestic conferenceStudy on behavior of micro bubbles in saltwaterOral presentation
- 26th International Symposium on Shock Waves, Jul. 2007, English, DLR, Institute of Aerodynamics and Flow Technology, Gottingen, Germany, International conferenceStudy on application of shock waves generated by micro bubbles to the treatment of ships' ballast waterPoster presentation
- 26th International Symposium on Shock Waves, Jul. 2007, English, DLR, Institute of Aerodynamics and Flow Technology, Gottingen, Germany, International conferenceStudy of mechanical and chemical effects induced by shock waves on the inactivation of a marine bacteriumPoster presentation
- 第47回高圧討論会, Nov. 2006, Japanese, 熊本産業文化会館, Domestic conferenceStudy on inactivation effect of impact pressure to marine bacteriaPoster presentation
- Kobe Visualization Symposium 2006, Sep. 2006, Japanese, 神戸大学百年記念館, Domestic conferenceStudy on Behavior and Collapse of Micro-nano BubblesPoster presentation
- Kobe Visualization Symposium 2006, Sep. 2006, Japanese, 神戸大学百年記念館, Domestic conferenceStudy on Behavior of Shock Waves in Sealed Aluminum Containers with WaterPoster presentation
- 平成17年度衝撃波シンポジウム, Mar. 2006, Japanese, 横浜国立大学, Domestic conferenceStudy on relation between shock pressure profile and sterilization effect of marine bacteriaOral presentation
- 平成17年度関西学生会卒業研究発表講演会, Mar. 2006, Japanese, 日本機械学会, 同志社大学京田辺キャンパス, Domestic conferenceResearch on Sterilization Method of Marine Vibrio sp. using Micro-nano BabblesOral presentation
- 平成17年度関西学生会卒業研究発表講演会, Mar. 2006, Japanese, 日本機械学会, 同志社大学京田辺キャンパス, Domestic conferenceStudy on Dynamic Properties of ABS Resin MaterialOral presentation
- 日本機械学会2005年度年次大会, Sep. 2005, Japanese, 東京電気通信大学, Domestic conferenceAn Attempt of Evaluating Material Properties to Develop an Impact Safety Simulator of AircraftOral presentation
- 2003年度神戸大学海事科学部プロジェクト研究報告会要旨集 pp.103-106, 2004, Japanese, 未記入, 未記入, Domestic conference創造発展型の新しい教育方法の試みOral presentation
- 平成15年度衝撃波シンポジウム講演論文集 pp.365-368, 2004, Japanese, 衝撃波研究会, 千葉大学, Domestic conference衝撃波の海洋ビブリオ細菌に与える致死効果に関する研究Oral presentation
- 平成15年度神戸大学海事科学部FDシンポジウム pp.10-12, 2004, Japanese, 未記入, 未記入, Domestic conference海洋電子機械工学課程の月制集中講義についてOral presentation
- 2003年度神戸大学海事科学部プロジェクト研究報告会要旨集 pp.57-59, 2004, Japanese, 未記入, 未記入, Domestic conferenceバラスト水からの海洋微生物除去に関する基礎研究Oral presentation
- 1st International Symposium on Explosive,Shock Wave and Hypervelocity Phenomena Abstracts pp.25, 2004, English, 未記入, 未記入, International conferenceA Study on the State in a Steady Shock Front Propagating in Aluminum MaterialsOral presentation
- 第40回日本航空宇宙学会 関西・中部支部合同秋季大会 pp.90-93, Nov. 2003, Japanese, 日本航空宇宙学会関西・中部支部, 神戸大学, Domestic conferenceアルミニウム材料中を伝播する衝撃波面の内部状態に関する研究Oral presentation
- The Japanese Society for Multiphase FlowApr. 2014 - Present
- International Shock Wave Institute
- 日本マリンエンジニアリング学会
- 日本可視化情報学会
- 日本機械学会
- Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Kobe University, 01 Apr. 2023 - 31 Mar. 2027Elucidation of the removing mechanism of marine organisms stuck to structure using cavitation jets and development of a nozzle expanding the removal effect area
- Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Challenging Research (Exploratory), Grant-in-Aid for Challenging Research (Exploratory), Kobe University, Jun. 2019 - Mar. 2022水中膜運動による省エネルギー型海水殺菌システムの構築と実証研究舶用バラスト水処理や船底付着生物除去を始めとする様々な海上移動体や海洋構造物への生物付着を防ぐ経済的効率的技術の確立が国際的に求められている。本研究では、衝撃圧力によって誘起する微小気泡運動の有効活用により、酸化作用物質(フリーラジカル)の効率的生成方法および条件を見出し、省エネルギーかつ安全安心な海洋微生物処理技術を確立し、海事産業分野に貢献できる海事科学分野発の圧縮性流体力学に基づく新しい基盤技術を創出することが目的である。 本年度の研究では、単一気泡の衝撃波による一連の崩壊運動によって生じるOHラジカルの生成量の理論的予測について検討を行なった。数十マイクロメートルオーダーの直径の気泡が最大圧力約6 MPaの水中衝撃波の圧力作用を受けると、気泡は収縮膨張運動を行なって崩壊する。気泡の収縮時には、気泡内の圧力及び温度の著しい上昇を伴い、その熱エネルギーによって気泡内の水蒸気が解離し、OHラジカルが生成されると考えられる。水蒸気からOHラジカルが生成するためには、約5000 Kが必要であることが知られている。本解析では、衝撃波作用による空気泡の収縮現象が高速で、ナノ秒オーダーの短時間であることから気泡内の空気及び水蒸気は断熱圧縮される仮定の下、水に関する27種類の化学種が関与する化学反応式を用いて解析を行なった。その結果、気泡内温度が最大となるタイミングとOHラジカルの生成量が最大となるタイミングは異なることが見出された。
- 科学研究費補助金/基盤研究(B), Apr. 2016 - Mar. 2020, Principal investigatorCompetitive research funding
- 学術研究助成基金助成金/挑戦的萌芽研究, Apr. 2016 - Mar. 2019, Principal investigatorCompetitive research funding
- 学術研究助成基金助成金/挑戦的萌芽研究, Apr. 2013 - Mar. 2016, Principal investigatorCompetitive research funding
- 科学研究費補助金/基盤研究(B), 2010, Principal investigatorCompetitive research funding
- 科学研究費補助金/基盤研究(C), 2006, Principal investigatorCompetitive research funding
- 科学研究費補助金/基盤研究(C), 2005Competitive research funding
- 日本学術振興会, 科学研究費助成事業, 萌芽的研究, 神戸商船大学, 1999 - 2001非定常衝撃跳躍の評価法の確立球面波頭内の小さい幅の線形ひずみ波に対して,ランキン-ユゴニオ型跳躍式を導き,半径方向粒子速度の跳躍に及ぼす波頭の伝播に伴う幾何学的減衰効果を評価した.幅の10倍以上の伝播距離に対して,球面波頭に対する跳躍が平面波頭に対する跳躍に近づき,幾何学的減衰効果が無視できることが示された.さらに,線形ひずみ波に対して一般跳躍式を導いた.半径方向粒子速度と半径方向応力の跳躍に及ぼす体積ひずみ速度,体積ひずみ加速度,減衰の影響を評価しつつある. 口径40mmの一段式軽ガス銃を用いて平面衝突実験を行った.飛翔体はABS樹脂製であり,樹脂の先端面に6061-T6アルミニュム円盤を取り付けた.飛翔体速度はマグネットフライヤー方式とレーザーカット方式の両方で測定した.4本のピンセンサーにより,衝突平面度を測定した.本実験の主計測である,6061-T6アルミニュム標的板裏面の自由表面速度(粒子速度の2倍)の計測には,主に速度干渉計(VISAR),アルゴンイオンレーザー,プルーブ,オッシロスコープからなる高時間分解能レーザー速度干渉計システムを用いた.計測した粒子速度-時間プロフィルと比較するために,衝撃粘性応力を理論的に見積もり,衝撃粘性応力を組み入れた1次元波動計算コードを開発した.252,311,390m/sの飛翔体速度で計測した粒子速度-時間プロフィルを計算プロフィルと比較した.252と311において比較は良好であったが,390m/sにおいて両プロフィルは少しずれた.
- Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B)., Kobe University of Mercantile Marine, 1997 - 2000Alloying Process and development of joining and alloying techniques for metalsA method of producing metal alloy on a very short time scale has been developed. One metal powder is sandwiched between bars of a second metal usually of a lower melting point and a lower electrical resistance, and an electrical current passed through under pressure. Joule heating is mostly generated in the powder because of its high resistance, causing it to melt first. The region of bar making immediate contact with the molten powder then melts, and intermixing on a local scale takes place. The boundary surface between this mixed portion and the bar propagates approximately as a front of a one-dimensional plane wave outward until melting is finished. The wave fronts travel further into the bars the longer the current is applied. Various metal alloys were produced using the combination of different kinds of metals and metal powders. To confirm the validity of the alloying process inferred above, thermodynamics of irreversible processes was developed, and heat waves were analyzed. This analysis of heat waves, which was submitted to Japanese Journal of Mechanical Engineering, revealed the validity of the inferred alloying process. This analysis is further developed by incorporating the intermixing process in the analysis and by measuring temperature-time profiles in the molten powder and mixed portion.
- 日本学術振興会, 科学研究費助成事業, 奨励研究(A), 神戸商船大学, 1993 - 1993異種気体界面と収縮衝撃波の干渉による界面の不安定性に関する研究本研究では、収縮衝撃波による超高圧力の発生とその利用技術の発展に関して重要となる収縮衝撃波と異種気体界面との干渉問題について数値シミュレーションによる解明を試みた。計算は衝撃波を伴う圧縮性流れのシミュレーションに良く使用され不連続面の捕獲性能に優れた二次精度風上型TVD差分法(Harten-Yee type)を用い、Euler方程式を解いた。スキームの確認として平面衝撃波と正弦曲線形状の界面との干渉問題を解き、Meshkovの実験結果と比較した結果、定性的に良好な結果を得た。問題解明の第一歩として界面形状の変化や干渉後の衝撃波の伝播挙動等を明らかにするため単純な正方形状の界面を選択し、初期衝撃波マッハ数1.5の円筒収縮衝撃波を界面に入射させた。fast/slow現象ならびにslow/fast現象を模擬するため、異種気体界面にはAir/SF6界面とAir/He界面を用いた。その結果界面形状の変化は、透過衝撃波背後の流れよりも、衝撃波が界面に入射した直後に発生する界面での反射波(圧縮波または膨脹波)が界面の上流側の粒子速度に著しい影響を与えてその粒子速度によって生じることが明かとなった。さらに周方向への透過衝撃波の反射がfast/slow現象ならびにslow/fast現象の特徴的な海面形状を決定する重要な要因となることがわかった。したがって、初期異種気体界面形状の波数が増加すれば短時間のうちに周方向から圧縮波または膨脹波が伝播してくることになり不安定性の成長に著しく影響することになると考えられる。また、本計算では円筒座標系とカルテシアン座標系を用いて計算を行い、界面形状の格子の種類による影響を調べた。本計算に使用した計算機(神戸商船大学計算センター)の能力不足のため充分な格子を配することが出来なかったが、界面形状は1格子の乱れでも最終的に著しい振幅の増大がみられ、初期界面形状に対する格子形状の選択が重要であることがわかった。