SEARCH
Search DetailsKOH SanghoGraduate School of Science, Technology and Innovation / Department of Science, Technology and InnovationAssistant Professor
Research activity information
■ Paper- Lignin-carbohydrate complexes (LCCs) present a considerable hurdle to the economic utilization of lignocellulosic biomass. Glucuronoyl esterase (GE) is an LCC-degrading enzyme that catalyzes the cleavage of the cross-linkages between lignin and xylan in LCCs. Benzyl-d-glucuronate (Bn-GlcA), a commercially available substrate, is widely used to evaluate GE activity assays. However, since Bn-GlcA lacks the structural backbone of naturally occurring LCCs, the mechanisms underlying the activity of GEs and their diversity in the structure-activity relationship are not fully understood. Herein, we provided a synthesis scheme for designing 1,23-α-d-(6-benzyl-4-O-methyl-glucuronyl)-1,4-β-d-xylotriose (Bn-MeGlcA3Xyl3) as a natural core substrate bearing cross-linkage between lignin and glucuronoxylan. A well-defined and yet more realistic synthetic substrate was successfully synthesized via a key step of the benzyl esterification of 4-O-methyl-glucuronyl-1,4-β-d-xylotriose (MeGlcA3Xyl3), a minimized fragment of glucuronoxylan enzymatically digested by β-1,4-xylanase. To the best of our knowledge, this is the first report of the productive GE kinetic analysis using this substrate. Kinetic parameters of the GE from the fungal Pestalotiopsis sp. AN-7 (PesGE), i.e., the Km, Vmax, and kcat of Bn-MeGlcA3Xyl3, were 0.43 mM, 55.5 μmol min-1·mg-1, and 35.8 s-1, respectively. On the other hand, as reported to date, the productive kinetic parameters for Bn-GlcA were not obtained because of its excessively high Km value (>16 mM). The substantial variance in the enzymatic activity of PesGE regarding substrate-binding affinity between Bn-MeGlcA3Xyl3 and Bn-GlcA was also demonstrated using in silico docking simulation. These results suggested that the extended xylan fragment is a key structural determinant affecting PesGE's substrate recognition. Furthermore, the presence of a natural xylan backbone allows for evaluating the enzyme activity of xylan-degrading enzymes. Accordingly, the synthesized substrate with the natural core structure of LCC allowed us to unveil the productive kinetic parameters of GEs, serving as a versatile substrate for further elucidating the cascade reaction of GE and xylan-degrading enzymes.Sep. 2024, Biochemical and biophysical research communications, 734, 150642 - 150642, English, International magazineScientific journal
- Previously, we biosynthesized an evolved version of a bio-based polylactide (PLA) on microbial platforms using our engineered lactate-polymerizing enzyme (LPE). This lactate (LA)-based copolyester, LAHB, has advantages over PLA, including improved flexibility and biodegradability, and its properties can be regulated through the LA fraction. To expand the LA-incorporation capacity and improve polymer properties, in the state of in vivo LAHB production, propionyl-CoA transferases (PCTs) that exhibited enhanced production of LA-CoA than the conventional PCTs were selected. Here, the present study has demonstrated that the LA fraction of LAHB could be altered using various PCTs. Enhanced PCT performance was achieved by balancing polymer production and cell growth. Both events are governed by the use of acetyl-CoA, a commonly shared key metabolite. This could be attributed to the different reactivities of individual PCTs towards acetyl-CoA, which serves both as a CoA donor and a leading compound in the TCA cycle. Interestingly, we found complete sequence randomness in the LAHB copolymers, independent of the LA fraction. The mechanism of LA fraction-independent sequence randomness is discussed. This new PCT-based strategy synergistically combines with the evolution of LPE to advance the LAHB project, and enables us to perform advanced applications other than LAHB production utilizing CoA-linked substrates.Jun. 2024, International journal of biological macromolecules, 274(Pt 2) (Pt 2), 133055 - 133055, English, International magazineScientific journal
- Apr. 2024, ACS Sustainable Chemistry & EngineeringScientific journal
- This study investigated the effect of polymer blending of microbially produced poly[(R)-lactate-co-(R)-3-hydroxybutyrate] copolymers (LAHB) with poly(lactate) (PLA) on their mechanical, thermal, and biodegradable properties. Blending of high lactate (LA) content and high molecular weight LAHB significantly improved the tensile elongation of PLA up to more than 250 % at optimal LAHB composition of 20-30 wt%. Temperature-modulated differential scanning calorimetry and dynamic mechanical analysis revealed that PLA and LAHB were immiscible but interacted with each other, as indicated by the mutual plasticization effect. Detailed morphological characterization using scanning probe microscopy, small-angle X-ray scattering, and solid-state NMR confirmed that PLA and LAHB formed a two-phase structure with a characteristic length scale as small as 20 nm. Because of mixing in this order, the polymer blends were optically transparent. The biological oxygen demand test of the polymer blends in seawater indicated an enhancement of PLA biodegradation during biodegradation of the polymer blends.Mar. 2024, International journal of biological macromolecules, 266(Pt 1) (Pt 1), 130990 - 130990, English, International magazineScientific journal
- Extracellular membrane vesicles (MVs) caused by the artificial production of polyhydroxybutyrate (PHB) were previously detected in Escherichia coli. We herein observed MV biogenesis in the mutant strain (-PHB) of the natural PHB producer, Cupriavidus necator H16. This inverse relationship was revealed through comparative electron microscopic ana-lyses of wild-type and mutant strains. Based on these results, we speculate that a physiological relationship exists between MV biogenesis and PHB biosynthesis. Therefore, we propose the potential of MV biogenesis as a fermentative "stress marker" for monitoring the performance of target polymer-producing microbial platforms.2024, Microbes and environments, 39(3) (3), English, Domestic magazineScientific journal
- Various generations of membrane vesicles (MV) have been observed in Escherichia coli in terms of triggering events and populations of single-layered (s)/multi-layered (m) forms. Previously, we proposed a novel mechanism for MV generation triggered by the intracellular accumulation of biopolyester polyhydroxybutyrate (PHB). This was designated as the Polymer Intracellular Accumulation-triggered system for Membrane Vesicle Production (PIA-MVP). Herein, we attempted to determine the conditions for the change in the population between s-MV and m-MV using glucose concentration-dependent PIA-MVP. PIA-MVP was established using the good correlation between the glucose concentration-dependent PHB accumulation and MV generation. Thus, we assumed the presence of a critical glucose concentration could determine the population ratio of s-MV to m-MV, indicating that s-MV generation is a dominant component in the extracellular environment. Cytoplasmic green fluorescent protein (GFP) was used to evaluate the glucose concentration, enabling the selective generation of s-MV. The glucose concentration was determined to be 15 g/L to satisfy this purpose under the culture conditions. In conclusion, we established a biological system allowing us to selectively generate both single- and multi-layered MVs based on PIA-VIP encapsulation of GFP, providing a versatile toolkit to gain insights into the MV generation mechanism and achieve progress in various engineering applications.MDPI AG, Sep. 2023, Applied Microbiology, 3(3) (3), 1027 - 1036Scientific journal
- Escherichia coli is a useful platform for producing valuable materials through the implementation of synthetic gene(s) derived from other organisms. The production of lactate (LA)-based polyester poly[LA-co-3-hydroxybutyrate (3HB)] was carried out in E. coli using a set of five other species-derived genes: Pseudomonas sp. 61-3-derived phaC1STQK (for polymerization), Cupriavidus necator-derived phaAB (for 3HB-CoA generation), and Megasphaera elsdenii-derived pct (for LA-CoA generation) cloned into pTV118NpctphaC1p(s)(ST/QK)AB. Here, we aimed to optimize the expression level and timing of these genes to improve the production of P(LA-co-3HB) and to manipulate the LA fraction by replacing the promoters with various promoters in E. coli. Evaluation of the effects of 21 promoter replacement plasmids revealed that the phaC1STQK-AB operon is critical for the stationary phase for P(LA-co-3HB) production. Interestingly, the effects of the promoters depended on the composition of the medium. In glucose-supplemented LB medium, the dps promoter replacement plasmid resulted in the greatest effect, increasing the accumulation to 8.8 g/L and an LA fraction of 14.1 mol% of P(LA-co-3HB), compared to 2.7 g/L and 8.1 mol% with the original plasmid. In xylose-supplemented LB medium, the yliH promoter replacement plasmid resulted in the greatest effect, with production of 5.6 g/L and an LA fraction of 40.2 mol% compared to 3.6 g/L and 22.6 mol% with the original plasmid. These results suggest that the selection of an appropriate promoter for expression of the phaC1STQK-AB operon could improve the production and LA fraction of P(LA-co-3HB). Here, we propose that the selection of cell-growth phase-dependent promoters is a versatile biotechnological strategy for effective intracellular production of polymeric materials such as P(LA-co-3HB), in combination with the selection of sugar-based carbon sources.BMC, Jul. 2023, MICROBIAL CELL FACTORIES, 22(1) (1), EnglishScientific journal
- The assembly of discrete active species to form periodical nanostructures is essential in realizing low-cost artificial enzymes that mimic natural enzymatic functions in extraordinary bio(chemo)selective reactions. In this study, we developed artificial bifunctional glucose/gluconic acid dehydrogenase from naturally abundant resources: l-aspartic acid (Asp) and montmorillonite (a subgroup of smectite natural clay minerals). β-d-Glucose (Glc) was dehydrogenated to 2-keto-d-gluconate (2-KGA) at 25 and 30 °C in an aqueous acidic solution (pH = 3, 4, and 5). The reaction involved sequential steps that yielded d-gluconic acid (GA) as an intermediate. The second step of the dehydrogenation (GA to 2-KGA) occurred at a higher rate than the first (Glc to GA), which is comparable to the natural process. A negatively charged carboxylate in Asp was required for the dehydrogenation, which donates an electron pair (COO:-) to the hydroxyl group bonded to the C(1)-position of Glc. The acidic sites in clay served as coenzymatic sites (electron acceptor), promoting the Glc dehydrogenation as the Glc reduced by Asp approached the clay coenzymatic sites. The active coenzymatic structures were developed in 48 h (induction period) through the rearrangement of the adsorbed Asp and Glc molecules on montmorillonite in water (intermediate structure). The spontaneous assembling of the intermediate structures facilitated the one-pot dehydrogenation of Glc to 2-KGA via periodic "hydrated stacked layers" comprising clay nanosheets, Asp, and Glc. The facile synthetic route proposed here is inexpensive and would be beneficial without using both GDH and GADH enzymes bound to a cell membrane.May 2022, Langmuir : the ACS journal of surfaces and colloids, English, International magazineScientific journal
- Membrane vesicles (MVs) are formed in various microorganisms triggered by physiological and environmental phenomena. In this study, we have discovered that the biogenesis of MV took place in the recombinant cell of Escherichia coli BW25113 strain that intracellularly accumulates microbial polyester, polyhydroxybutyrate (PHB). This discovery was achieved as a trigger of foam formation during the microbial PHB fermentation. The purified MVs were existed as a mixture of outer MVs and outer/inner MVs, revealed by transmission electron microscopy. It should be noted that there was a good correlation between MV formation and PHB production level that can be finely controlled by varying glucose concentrations, suggesting the causal relationship in both supramolecules artificially produced in the microbial platform. Notably, the controllable secretion of MV was governed spatiotemporally through the morphological change of the E. coli cells caused by the PHB intracellular accumulation. Based on a hypothesis of PHB internal-pressure dependent envelope-disorder induced MV biogenesis, here we propose a new Polymer Intracellular Accumulation-triggered system for MV Production (designated "PIA-MVP") with presenting a mechanistic model for MV biogenesis. The PIA-MVP is a promising microbial platform that will provides us with a significance for further study focusing on biopolymer capsulation and cross-membrane transportation for different application purposes.NATURE PORTFOLIO, Mar. 2022, Scientific reports, 12(1) (1), 3393 - 3393, English, International magazineScientific journal
- The reaction mechanisms occurring during the electrocatalytic oxidation of cellulose dissolved in a highly alkaline aqueous electrolyte were elucidated by hydrodynamic voltammetry using a Pt rotating disk electrode as well as product analyses. The charge-transfer limited current associated with the multielectron process in which macromolecules are cleaved into relatively short hydrocarbons was found to be dominant at relatively negative potentials, whereas further decomposition of the hydrocarbons proceeded at more positive potentials. Au was shown to facilitate the cleavage of cellulose macromolecules, while Pd and Ni promoted additional oxidative decomposition of the short-chain hydrocarbons. A fuel cell composed of Pt-deposited Ni foam electrodes as both the anode and cathode was capable of generating electricity in an external circuit while directly utilizing cellulose as a fuel, even at ambient temperature and pressure. The present study provides new insights into these reaction mechanisms and will assist in the design of catalytic materials intended for the effective utilization of biomass energy sources.AMER CHEMICAL SOC, Jul. 2021, JOURNAL OF PHYSICAL CHEMISTRY C, 125(27) (27), 14576 - 14582, EnglishScientific journal
- A photo-assisted fuel cell (photofuel cell; PFC) consisting of a porous TiO2 photoanode and a Pt cathode in an aqueous electrolyte containing an organic fuel has been developed to generate an electric power by photoelectrochemically decomposing the fuel. Although direct utilization of cellulose as a fuel should be preferable, photocatalytic direct decomposition of cellulose, polymeric macromolecules, has been rarely reported. In the present study, a cellulose thin film deposited onto the TiO2 photoanode was used as the fuel. It was revealed that the cellulose was decomposed into CO2 through small carbonyl hydrocarbon intermediates. The complete decomposition of cellulose into CO2 implies that almost all the Gibbs free energy of cellulose can be converted into an electric power with the assistance of the photon energy. The PFC composed of the cellulose-deposited TiO2 and Pt-deposited Ni foam exhibited excellent photovoltaic performances (1.1 V of photovoltage and quantum efficiency up to 52 %). The present study should represent a potential means of electric power generation based on renewable energy sources by effectively treating waste biomass.WILEY-V C H VERLAG GMBH, Mar. 2021, CHEMCATCHEM, 13(6) (6), 1530 - 1537, EnglishScientific journal
- The genus Pestalotiopsis are endophytic fungi that have recently been identified as cellulolytic system producers. We herein cloned a gene coding for a xylanase belonging to glycoside hydrolase (GH) family 10 (PesXyn10A) from Pestalotiopsis sp. AN-7, which was isolated from the soil of a mangrove forest. This protein was heterologously expressed by Pichia pastoris as a host, and its enzymatic properties were characterized. PesXyn10A was produced as a glycosylated protein and coincident to theoretical molecular weight (35.3 kDa) after deglycosylation by peptide-NfF-glycosidase F. Purified recombinant PesXyn10A exhibited maximal activity at pH 6.0 and 50 °C, and activity was maintained at 90 % at pH 5.0 and temperatures lower than 30 °C for 24 h. The substrate specificity of PesXyn10A was limited and it hydrolyzed glucuronoxylan and arabinoxylan, but not β-glucan. The final hydrolysis products from birchwood xylan were xylose, xylobiose, and 1,23-α-D-(4-O-methyl-glucuronyl)-1,4-β-D-xylotriose. The addition of metallic salts (NaCl, KCl, MgCl2, and CaCl2) activated PesXyn10A for xylan degradation, and maximal activation by these divalent cations was approximately 160 % at a concentration of 5 mM. The thermostability of PesXyn10A significantly increased in the presence of 50 mM NaCl or 5 mM MgCl2. The present results suggest that the presence of metallic salts at a low concentration, similar to brackish water, exerts positive effects on the enzyme activity and thermal stability of PesXyn10A.JAPANESE SOC APPLIED GLYCOSCIENCE, 2021, Journal of applied glycoscience, 68(1) (1), 11 - 18, English, Domestic magazineScientific journal
- The carbohydrate esterase family 1 (CE1) in CAZy contains acetylxylan esterases (AXEs) and feruloyl esterases (FAEs). Here we cloned a gene coding for an AXE belonging to CE1 from Irpex lacteus (IlAXE1). IlAXE1 was heterologously expressed in Pichia pastoris, and the recombinant enzyme was purified and characterized. IlAXE1 hydrolyzed p-nitrophenyl acetate, α-naphthyl acetate and 4-methylumbelliferyl acetate, however, it did not show any activity on ethyl ferulate and methyl p-coumarate. We also examined the activity on partially acetylated and feruloylated xylan extracted from corncob by hydrothermal reaction. Similarly, ferulic and p-coumaric acids were not liberated, and acetic acid was only detected in the reaction mixture. The results indicated that IlAXE1 is an acetylxylan esterase actually reacted to acetyl xylan. However, since IlAXE1 was unable to completely release acetic acid esterifying xylopyranosyl residues, it is assumed that acetyl groups exhibiting resistance to deacetylation by IlAXE1 are present in corn cob xylan.JAPANESE SOC APPLIED GLYCOSCIENCE, 2019, Journal of applied glycoscience, 66(4) (4), 131 - 137, English, Domestic magazineScientific journal