SEARCH
検索詳細
池尾 直子大学院工学研究科 機械工学専攻准教授
研究活動情報
■ 受賞- 2020年01月 日本マグネシウム協会, 日本マグネシウム協会賞 奨励賞
- 2018年09月 日本金属学会, 第28回 日本金属学会奨励賞
- 2017年11月 一般社団法人 軽金属学会, 軽金属女性未来賞
- 2016年09月 日本金属学会, 第64回 日本金属学会論文賞 受賞者, Solid/Powder Clad Ti-6Al-4V Alloy with Low Young's Modulus and High Toughness Fabricated by Electron Beam Melting学会誌・学術雑誌による顕彰
- Japan Institute of Metals, 2022年01月, MATERIALS TRANSACTIONS, 63(1) (1), 69 - 72, 英語研究論文(学術雑誌)
- 2022年, J Appl Biomater Funkt Mater., 20[査読有り]
- Japan Institute of Metals, 2021年12月, MATERIALS TRANSACTIONS, 62(12) (12), 1806 - 1809, 英語[査読有り]研究論文(学術雑誌)
- (一社)日本泌尿器科学会総会事務局, 2021年12月, 日本泌尿器科学会総会, 109回, PP22 - 07, 日本語生体分解性亜鉛マグネシウム合金の開発及び、尿路手術での使用の検討
- Elsevier {BV}, 2021年12月, Materials Characterization, 182, 111556 - 111556, 英語[査読有り]研究論文(学術雑誌)
- In this study, a Ti–6Al–4V alloy composite with uniaxial anisotropy and a hierarchical structure is fabricated using electron beam powder bed fusion, one of the additive manufacturing techniques that enable arbitrary fabrication, and subsequent heat treatment. The uniaxial anisotropic deformation behavior and mechanical properties such as Young’s modulus are obtained by introducing a unidirectional honeycomb structure. The main feature of this structure is that the unmelted powder retained in the pores of the honeycomb structure. After appropriate heat treatment at 1020◦C, necks are formed between the powder particles and between the powder particles and the honeycomb wall, enabling a stress transmission through the necks when the composite is loaded. This means that the powder part has been mechanically functionalized by the neck formation. As a result, a plateau region appears in the stress–strain curve. The stress transfer among the powder particles leads to the cooperative deformation of the composites, contributing to the excellent energy absorption capacity. Therefore, it is expected that the composite can be applied to bone plates on uniaxially oriented microstructures such as long bones owing to its excellent energy absorption capacity and low elasticity to unidirectionally suppress stress shielding.2021年09月, Crystals, 11(9) (9)[査読有り]研究論文(学術雑誌)
- Metal additive manufacturing is a powerful tool for providing the desired functional performance through a three-dimensional (3D) structural design. Among the material functions, anisotropic mechanical properties are indispensable for enabling the capabilities of structural materials for living tissues. For biomedical materials to replace bone function, it is necessary to provide an anisotropic mechanical property that mimics that of bones. For desired control of the mechanical performance of the materials, we propose a novel 3D puzzle structure with cube-shaped parts comprising 27 (3 × 3 × 3) unit compartments. We designed and fabricated a Co–Cr–Mo composite structure through spatial control of the positional arrangement of powder/solid parts using the laser powder bed fusion (L-PBF) method. The mechanical function of the fabricated structure can be predicted using the rule of mixtures based on the arrangement pattern of each part. The solid parts in the cubic structure were obtained by melting and solidifying the metal powder with a laser, while the powder parts were obtained through the remaining nonmelted powders inside the structure. This is the first report to achieve an innovative material design that can provide an anisotropic Young’s modulus by arranging the powder and solid parts using additive manufacturing technology.MDPI AG, 2021年08月, Crystals, 11(8) (8), 959 - 959[査読有り]研究論文(学術雑誌)
- Elsevier BV, 2021年08月, Materialia, 18, 101172 - 101172[査読有り]研究論文(学術雑誌)
- Elsevier BV, 2021年08月, Journal of Alloys and Compounds, 872, 159668 - 159668[査読有り]研究論文(学術雑誌)
- Ti-6Al-4V alloy fabricated by laser powder bed fusion (L-PBF) and electron beam powder bed fusion (EB-PBF) techniques have been studied for applications ranging from medicine to aviation. The fabrication technique is often selected based on the part size and fabrication speed, while less attention is paid to the differences in the physicochemical properties. Especially, the relationship between the evolution of α, α’, and β phases in as-grown parts and the fabrication techniques is unclear. This work systematically and quantitatively investigates how L-PBF and EB-PBF and their process parameters affect the phase evolution of Ti-6Al-4V and residual stresses in the final parts. This is the first report demonstrating the correlations among measured parameters, indicating the lattice strain reduces, and c/a increases, shifting from an α’ to α+β or α structure as the crystallite size of the α or α’ phase increases. The experimental results combined with heat-transfer simulation indicate the cooling rate near the β transus temperature dictates the resulting phase characteristics, whereas the residual stress depends on the cooling rate immediately below the solidification temperature. This study provides new insights into the previously unknown differences in the α, α’, and β phase evolution between L-PBF and EB-PBF and their process parameters.MDPI AG, 2021年07月, Crystals, 11(7) (7), 796 - 796[査読有り]研究論文(学術雑誌)
- 2021年07月, スマートプロセス学会誌, 10(4) (4), 246 - 250電子ビーム粉末床溶融法によるTi-6Al-4V合金製三次元多孔質構造体の創製と微細組織制御[査読有り]
- 2021年07月, スマートプロセス学会誌, 10(4) (4), 265 - 269レーザ粉末床溶融結合法による導電性材料としての銅合金の造形[査読有り]研究論文(学術雑誌)
- Drawing is suitable for manufacturing fine metal wire. This study was designed to clarify the effects of additive elements, calcium or zinc, on mechanical properties of drawn magnesium wires. Binary alloys of Mg-0.3 at. % Ca and Mg-0.1 at. % Zn were cast followed by extrusion. The extrusion bars were drawn to fabricate a fine wire with a diameter of 0.2 mm. Tensile tests were conducted for the wires. The results of the tensile tests confirmed that yield stress increased as the content of the solute element increased, while the work hardening rate and tensile ductility differed depending on the types of additive element. Inspection of the drawn microstructure revealed that the additive element plays an important role in microstructure evolution in magnesium.Springer Science and Business Media Deutschland GmbH, 2021年, Minerals, Metals and Materials Series, 135 - 140, 英語研究論文(国際会議プロシーディングス)
- In recent years, magnesium is expected to be used as a structural material in vehicles. Since limited slip systems in magnesium induces marked yield anisotropy and poor deformability at room temperature, there is a specific demand for developing magnesium alloys with reduced plastic anisotropy. In this study, we focused on the Mg–Al system alloy, which is widely used in commerce, and examined the third element contributing to the reduction of the plastic anisotropy. Generalized stacking fault energy (GSFE), which corresponds to the energy for sliding atomic layer along a slip plane, was calculated in the first-principles calculations to estimate deformability of ternary Mg–Al-X alloys adding the third element X, to the Mg–Al binary alloy. As the third element X, Zn, Zr, and Gd were selected. The slip properties were evaluated using the unstable stacking fault energy (USFE), which represents the maximum value of GSFE. The result suggested that the addition of zirconium contributes most to the reduction of plastic anisotropy.Springer Science and Business Media Deutschland GmbH, 2021年, Minerals, Metals and Materials Series, 37 - 44, 英語研究論文(国際会議プロシーディングス)
- 2021年, Materials Transactions, 62(9) (9)研究論文(学術雑誌)
- PURPOSE: Develop a novel biocompatible solid fiducial marker that prevents radiopaque imaging artifacts and also maintains high imaging contrast for kilovoltage X-ray image-guided radiation therapy. METHODS: The fiducial marker was made of pure zinc. An in-house water-equivalent phantom was designed to evaluate artifacts and visibility under various simulated treatment scenarios. Image artifacts were quantitatively assessed in terms of the metal artifact index (MAI) on kilovoltage computed tomography (CT) and cone-beam CT (CBCT) scans. Marker visibility was evaluated on two types of kilovoltage planar X-ray images in terms of the contrast-to-background ratio (CBR). Comparisons with a conventional gold fiducial marker were conducted. RESULTS: Use of a zinc rather than a gold marker mitigates imaging artifacts. The MAI near the zinc marker decreased by 76, 79, and 77 % in CT, and by 77 (81), 74 (80), and 79 (85) % in CBCT full-fan (half-fan) scans, when using one-, two- and three-marker phantom settings, respectively. The high-contrast part of the zinc marker exhibited CBRs above 2.00 for 28/32 exposures under four (lung, tissue, low-density bone, and high-density bone) different simulation scenarios, making its visibility comparable to that of the gold marker (30/32 exposures with CBRs > 2.00). CONCLUSIONS: We developed a biocompatible, artifact-robust, and highly visible solid zinc fiducial marker. Although further evaluation is needed in clinical settings, our findings suggest its feasibility and benefits for kilovoltage X-ray image-guided radiation therapy.Wiley, 2020年07月, Medical Physics, 47(10) (10), 4703 - 4710, 英語, 国際誌[査読有り]研究論文(学術雑誌)
- PURPOSE: Metallic medical devices are typically constructed from non-bioabsorbable metals that remains in the body and causes considerable complications. Particularly in the urinary tract, calculus, intractable infection, and misdiagnosis as calculus are often caused by non-bioabsorbable metals. Here, we developed a zinc-magnesium alloy as a new bioabsorbable metal and sought to evaluate the bioabsorbable behavior of zinc and zinc-magnesium alloy in a rat bladder implantation model. METHODS: We prepared zinc-magnesium alloy wires with various proportions of magnesium and investigated the strength, shape retention, formability, and absorbability of these novel materials. Then, we implanted zinc and zinc-magnesium alloy rings formed by the wires into rat bladder. Rats were euthanized at the end of the observation period, and the rings were removed for volume evaluation. Extracted bladder tissues were subjected to histological analysis. RESULTS: The strength of the zinc wire was enhanced by more than fourfold upon the addition of magnesium, without loss of ductility. Linear reduction of ring volume in urine was observed based on the concentration of magnesium within the ring. Nearly all rings were covered with a thin layer of calculus. Histological findings of the transected urinary bladder tissues did not differ among groups. CONCLUSIONS: Zinc-magnesium alloy is a promising candidate for use as a bioabsorbable medical device in the urinary tract.2020年02月, World journal of urology, 39(1) (1), 201 - 208, 英語, 国際誌[査読有り]研究論文(学術雑誌)
- 2020年01月, Magnesium Technology 2020, 381(385) (385)Influence of Manganese on Deformation Behavior of Magnesium Under Dynamic Loading[査読有り]研究論文(国際会議プロシーディングス)
- BACKGROUND: The use of surgical metal clips is crucial for ligating vessels in various operations. The currently available metal clips have several drawbacks; they are permanent and interfere with imaging techniques such as computed tomography (CT) or magnetic resonance (MR) imaging and carry the potential risk of endo-clip migration. We recently developed a novel magnesium (Mg) alloy for biodegradable clips that reduces artifacts on CT imaging. This study aimed to examine the tolerance, biodegradability, and biocompatibility of the Mg alloy clips compared with those of standard titanium (Ti) clips in hepatectomy. METHODS: Thirty Wistar rats were divided into two groups based on the clip used (groups A and B). The vascular pedicle, including hepatic artery, portal vein, bile duct, and hepatic vein of the left lateral lobe, was ligated with the Ti clip in group A or the Mg alloy clip in group B, and then the left lateral lobe was removed. The rats were sacrificed at 1, 4, 12, 24, and 36 weeks after surgery. Clinical and histological evaluations were performed. Absorption rate was calculated by measuring the clip volume. RESULTS: Although the Mg alloy clips showed biodegradability over time, there were no significant differences in the serum concentration of Mg between the two groups. The remaining volume ratio of Mg alloy clips was 95.5, 94.3, 80.0, 36.2, and 16.7% at 1, 4, 12, 24, and 36 weeks, respectively. No side effects occurred. Most of the microscopic changes were similar in both groups. CONCLUSIONS: The new biodegradable Mg alloy clips are safe and feasible in vessel ligation for hepatectomy in a rat model and reduce artifacts in CT imaging compared with the standard Ti clips.2019年09月, BMC surgery, 19(1) (1), 130 - 130, 英語, 国際誌[査読有り]研究論文(学術雑誌)
- 2019年05月, 軽金属, 69(5) (5), 287 - 292, 日本語アルミナ飛翔体の超高速衝突によるマグネシウムの組織変化[査読有り]
- 2019年04月, Materials Letters, Vol. 241, 96 - 99, 英語Fabrication and characterization of Mg-0.2 at% Ca/alpha-tricalcium phosphate composites[査読有り]研究論文(学術雑誌)
- The present study was designed to investigate the biodegradation behavior of Mg alloy plates in the maxillofacial region. For in vitro analysis, the plates were immersed in saline solution and simulated body fluid. For in vivo, the plates were implanted into the tibia, head, back, abdominal cavity, and femur and assessed at 1, 2, and 4 weeks after implantation. After implantation, the plate volumes and the formed insoluble salt were measured via micro-computed tomography. SEM/EDX analysis of the insoluble salt and histological analysis of the surrounding tissues were performed. The volume loss of plates in the in vitro groups was higher than that in the in vivo groups. The volume loss was fastest in the abdomen, followed by the head, back, tibia, and femur. There were no statistically significant differences in the insoluble salt volume of the all implanted sites. The corrosion of the Mg alloy will be affected to the surrounding tissue responses. The material for the plate should be selected based on the characteristic that Mg alloys are decomposed relatively easily in the maxillofacial region.2019年02月, Dental materials journal, 38(1) (1), 11 - 21, 英語, 国内誌[査読有り]研究論文(学術雑誌)
- Japan Institute of Metals, 2019年01月, Materials Transactions, 60(1) (1), 105 - 110, 英語[査読有り]研究論文(学術雑誌)
- 2018年07月, Materials Letters, 223(15) (15), 65 - 68, 英語Fabrication of biodegradable materials with high strength by grain refinement of Mg–0.3 at.% Ca alloys[査読有り]研究論文(学術雑誌)
- Magnesium (Mg) alloys are considered promising materials for biodegradable medical devices however, the initial effects and distribution of released Mg2+ ions following implantation are unclear. This is addressed in the present study, using two types of Mg alloys implanted into rats. An in vitro immersion test was first carried out to quantify Mg2+ ions released from the alloys at early stages. Based on these data, we performed an in vivo experiment in which large amounts of alloys were subcutaneously implanted into the backs of rats for 1, 5, 10, and 25 h. Mg2+ accumulation in organs was measured by inductively coupled plasma mass spectrometry. In vivo, blood and urine Mg2+ concentrations were higher in rats receiving the implants than in controls after 1 h however, the levels were within clinically accepted guidelines. The Mg2+ concentration in bone was significantly higher in the 25 h implanted group than in the other groups. Our results suggest that homeostasis is maintained by urinary excretion and bone accumulation of released Mg2+ ions in response to sudden changes in Mg2+ ion concentration in the body fluid in a large number of Mg alloy implants at the early stages.Institute of Physics Publishing, 2018年03月, Biomedical Materials (Bristol), 13(3) (3), 035006, 英語[査読有り]研究論文(学術雑誌)
- A magnesium matrix composite made of Mg-1mass%Ca and 10 vol% hydroxyapatite (HAp) particles was synthesized. The alloy powder was processed by pulverization of the small blocks of the alloy ingot using a high-speed blade grinder. Unreacted composite was successfully produced by extruding the two component powders at a temperature of 538 K. In the extruded compos-ites, the grains of the magnesium matrix were equiaxed and the matrix grain size was 3.9 μm. As for the HAp particles, both thin clustering and severe agglomeration with the size of ~30 μm were observed. The Young's modulus, tensile yield strength and tensile strength of the extruded composite were 39 GPa, 101 MPa and 153 MPa, respectively. The damping capacity of the composite was higher than that of extruded magnesium. The composite also showed good forgeability at a temperature of 523 K. However, quite high impurity contents of Fe (0.130 mass%) and Ni (0.010 mass%) were introduced in the magnesium matrix of the composite, probably as a result of contamination that accumulates during the processing (pulverization) of the alloy powder.Japan Institute of Metals (JIM), 2018年, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 82(1) (1), 18 - 24, 日本語[査読有り]研究論文(学術雑誌)
- Equal channel angular extrusion (ECAE) was applied to an extruded Mg-1.0mass%Ca alloy to achieve a high strength and high damping capacity. Microstructure observations revealed that the texture and local misorientation distribution depend on the ECAE temperature. ECAE at a low temperature of 260 degrees C resulted in a high average Schmid factor of basal slip and a high kernel average misorientation in the processed alloy. Consequently, the alloy processed by ECAE showed a high yield strength without sacrificing the damping capacity. (C) 2017 Elsevier B.V. All rights reserved.ELSEVIER SCIENCE BV, 2017年08月, MATERIALS LETTERS, 201, 144 - 147, 英語[査読有り]研究論文(学術雑誌)
- (一社)日本消化器外科学会, 2017年07月, 日本消化器外科学会総会, 72回, O3 - 6, 日本語消化器外科の診断・手技・治療に役立つ先進技術 マグネシウム合金を用いた新規生体吸収性外科クリップの開発 イヌ胆嚢摘出モデルでの安全性と忍容性の検討
- Background. Operative clips used to ligate vessels in abdominal operation usually are made of titanium. They remain in the body permanently and form metallic artifacts in computed tomography images, which impair accurate diagnosis. Although biodegradable magnesium instruments have been developed in other fields, the physical properties necessary for operative clips differ from those of other instruments. We developed a biodegradable magnesium-zinc-calcium alloy clip with good biologic compatibility and enough clamping capability as an operative clip. In this study, we verified the safety and tolerability of this clip for use in canine cholecystectomy. Methods. Nine female beagles were used. We performed cholecystectomy and ligated the cystic duct by magnesium alloy or titanium clips. The chronologic change of clips and artifact formation were compared at 1, 4, 12, 18, and 24 weeks postoperative by computed tomography. The animals were killed at the end of the observation period, and the clips were removed to evaluate their biodegradability. We also evaluated their effect on the living body by blood biochemistry data. Results. The magnesium alloy clip formed much fewer artifacts than the titanium clip, and it was almost absorbed at 6 months postoperative. There were no postoperative complications and no elevation of constituent elements such as magnesium, calcium, and zinc during the observation period in both groups. Conclusion. The novel magnesium alloy clip demonstrated sufficient sealing capability for the cystic duct and proper biodegradability in canine models. The magnesium alloy clip revealed much fewer metallic artifacts in GT than the conventional titanium clip.MOSBY-ELSEVIER, 2017年06月, SURGERY, 161(6) (6), 1553 - 1560, 英語[査読有り]研究論文(学術雑誌)
- Recently, biodegradable bone fixation devices have been demanded when considering the patient's quality of life (QOL). During the fracture healing, the devices must support the repeated load due to daily performance. At the same time, surface of the magnesium devices was affected by body fluid. Thus in this research, in vitro fatigue properties of biodegradable Mg-0.3at.% Ca alloy was evaluated by using simulated body fluid. Though there was fatigue limit when the test was conducted under the ambient condition, it cannot be confirmed during the test in the simulated body fluid. Inspection of fracture surface revealed that crack propagated along the grain boundary after both the fatigue tests.SPRINGER INTERNATIONAL PUBLISHING AG, 2017年, Magnesium Technology 2017, 533 - 535, 英語[査読有り]研究論文(国際会議プロシーディングス)
- (一社)日本消化器外科学会, 2016年07月, 日本消化器外科学会総会, 71回, P1 - 10, 日本語新しい生体吸収性マグネシウム合金クリップの開発とラット肝切除モデルにおける応用
- (一社)日本消化器外科学会, 2016年07月, 日本消化器外科学会総会, 71回, P1 - 10, 日本語新規マグネシウム合金を用いた生体吸収性外科クリップの開発
- 2016年06月, 軽金属, 66, 312 - 317, 日本語生体内分解性マグネシウムステントの創製と機械的性質[査読有り]研究論文(学術雑誌)
- Biodegradable magnesium (Mg) alloys are the most promising candidates for osteosynthesis devices. However, their in vivo corrosion behaviour has not been fully elucidated. The aim of this study was to clarify the influence of the physiological environment surrounding Mg alloys on their corrosion behaviour. A Mg-1.0Al alloy with a fine-grained structure was formed into plates using titanium (Ti) as a control. These plates were implanted into the subperiosteum in the head, subcutaneous tissue of the back, and in the muscle of the femur of rats for 1, 2 and 4 weeks. The volumes of the remaining Mg alloy and of the insoluble salt deposition and gas cavities around the Mg alloy were determined by microtomography, and the volume losses were calculated. Then, the tissue response around the plates in each implantation site was examined histopathologically, and its relation to the respective volume loss was analyzed. These analyses determined that the Mg alloy was corroded fastest in the head, at an intermediate level in the back, and slowest in the femur. The insoluble salt deposition at the Mg alloy surface had no influence on the volume loss. Gas cavities formed around the Mg alloy at all implantation sites and decreased after 4 weeks. Histopathological examination revealed that the Mg alloy exhibited good biocompatibility, as was seen with Ti. In addition, vascularized fibrous capsules formed around the plates and became mature with time. Notably, the volume loss in the different anatomical locations correlated with capsule thickness. Together, our results suggest that, to facilitate the successful clinical application of Mg alloys, it will be necessary to further comprehend their interactions with specific in vivo environments.IOP PUBLISHING LTD, 2016年04月, BIOMEDICAL MATERIALS, 11(2) (2), 英語[査読有り]研究論文(学術雑誌)
- We measured the impact toughness of three alloys (Mg, Mg-0.3 at%Ca-0.6 at%Zn, and Mg-0.3 at%Ca-0.6 at %Al) by the impact three-point bending test The plastic deformability and impact toughness were higher in the ternary alloys than in pure Mg. The generalized stacking fault energy and grain boundary cohesive energy were estimated by first-principles calculations for Mg, binary Mg-Ca, ternary Mg-Ca-Zn, and ternary Mg-Ca-Al alloys. The calculation results agreed with the trend in the experimental results. We suggest that addition of Ca along with Zn or Al reduced plastic anisotropy and strengthened the grain boundaries, leading to higher in impact toughness of Mg alloys. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.PERGAMON-ELSEVIER SCIENCE LTD, 2016年02月, Acta Materialia, 104, 283 - 294, 英語[査読有り]研究論文(学術雑誌)
- Magnesium alloying with calcium is very promising for mechanical strength. One of the promising alloys systems is ternary Mg-Zn-Ca. Recent results by the first principles calculation suggest that the combination of calcium and zinc possibly enhances the cohesive energy of grain boundary. In this work, Mg-Zn-Ca alloys with low alloying amounts of 0.1-0.3at% Ca and 0.2-0.6at% Zn were studied. Very fine grain size of smaller than 0.5 micron was achieved after extrusion, with finer substructure of the order of 100 nm. Microstructure showed sharp grain boundaries A possible ordering of atoms in the matrix was observed. These ultra-fine and complex grain structures have been studied with the aid of advanced transmission electron microscopy techniques.Minerals, Metals and Materials Society, 2016年, Magnesium Technology, 2016-, 83 - 88, 英語研究論文(国際会議プロシーディングス)
- 一般社団法人 日本機械学会, 2016年, M&M材料力学カンファレンス, 2016(0) (0), PS - 41, 日本語
Today, there is a demand for bio-stapler which gradually degraded in the body and disappeared after healing from the medical field. Magnesium is noted as the material with biodegradability and biocompatibility. However, compared with the current material, magnesium have too poor mechanical properties to apply to the stapler. Therefore, it is necessary to improve its mechanical properties. It is known that addition of Ca improves the strength and corrosion resistance. To investigate the effect of alloying element on formability of Mg-Ca alloys, the generalized stacking fault energy was estimated by first-principles calculations for binary Mg-Ca, ternary Mg-Ca-Na, ternary Mg-Ca-K and ternary Mg-Ca-Sr alloys. We suggest that addition of Na, K or Sr reduced plastic anisotropy of binary Mg-Ca alloys.
- Today, stent is employed to expand the narrowed tubular organ such as blood vessel, esophagus and bile duct. The major of materials used for the stent is stainless steel or Ni-Ti alloy which remains in the body permanently and prevents the second application. Accordingly, this research targets on developing the biodegradable magnesium stent. Magnesium is, however, inferior to the conventional materials in mechanical properties. Therefore, it is required to improve the mechanical properties of magnesium and design the stent considering poverty of strength and ductility. To improve the mechanical properties, strengthening by solid solution due to adding Zn and Ca and by grain refining due to doubly hot extrusion were conducted. As a result, the extruded Mg-Ca-Zn alloy showed the superior mechanical properties compared with the conventional magnesium alloys. Furthermore, finite element analysis (FEA) based on the material data was conducted to investigate mechanical performance of a stent model. As a result of the FEA, it was indicated that Mg alloy stent has sufficient ductility for expansion and strength for restenosis. Examination for expanding a fabricated stent revealed that the FEA was reasonable and the present alloy was a good candidate for the stent application.Japan Institute of Light Metals, 2016年, Keikinzoku/Journal of Japan Institute of Light Metals, 66(6) (6), 312 - 317, 日本語[査読有り]研究論文(学術雑誌)
- Mechanical properties of magnesium alloys under dynamic loading are still unclear. To evaluate the impact fracture behavior of magnesium alloys, we constructed a novel impact three-point bending test apparatus using three elastic bars with Charpy standard-size specimen, and investigated the impact fracture properties of as-cast Mg-3%Al-1%Zn (hereafter denoted as AZ31) alloy. Finite element (FE) analysis were carried out to estimate the effect of inertial force of the specimen during the impact three-point bending. Based on the FE analysis, we successfully developed a small-scale apparatus for examining a quarter-size specimen, which was capable of carrying out the impact three-point bending test with minimized influence of the inertial force. Impact fracture behavior of Mg-6%Al-1%Zn-2%Ca (hereafter denoted as AZX612) alloy was estimated and compared by using small-scale apparatus. The experimental results pointed out that the AZX612 had had similar energy absorption capability to AZ31 against the dynamic loading, however, the crack propagation speed of the Ca bearing alloy was almost twice as fast as that of the AZ31 alloy.Japan Institute of Light Metals, 2016年, Keikinzoku/Journal of Japan Institute of Light Metals, 66(5) (5), 258 - 265, 日本語[査読有り]研究論文(学術雑誌)
- Superplastic deformation behavior was investigated for a dual-phase Mg-Ca alloy. The elongation-to-failure reached more than 120% with the strain rate sensitivity, m, over 0.4. The activation energy required for the deformation was estimated to be 98 kJ/mol which is close to the activation energy for grain boundary diffusion in magnesium. Therefore, the superplastic deformation mechanism was suggested to be the grain boundary sliding, which is controlled by boundary diffusion.Trans Tech Publications Ltd, 2016年, Materials Science Forum, 838-839, 256 - 260, 英語[査読有り]研究論文(国際会議プロシーディングス)
- To develop a biodegradable clip, the equivalent plastic strain distribution during occlusion was evaluated by the finite element analysis (FEA) using the material data of pure Mg. Since the PEA suggested that a maximum plastic strain of 0.40 is required to allow the Mg clips, the alloying of magnesium with essential elements and the control of microstructure by hot extrusion and annealing were conducted. Mechanical characterization revealed that the Mg-Zn-Ca alloy obtained by double extrusion followed by annealing at 673 K for 2 h possessed a fracture strain over 0.40. The biocompatibility of the alloy was confirmed here by investigating its degradation behavior and the response of extraperitoneal tissue around the Mg-Zn-Ca alloy. Small gas cavity due to degradation was observed following implantation of the developed Mg-Zn-Ca clip by in vivo micro-CT. Histological analysis, minimal observed inflammation, and an only small decrease in the volume of the implanted Mg-Zn-Ca clip confirmed its excellent biocompatibility. FEA using the material data for ductile Mg-Zn-Ca also showed that the clip could occlude the simulated vessel without fracture. In addition, the Mg-Zn-Ca alloy clip successfully occluded the renal vein. Microstructural observations using electron backscattering diffraction confirmed that dynamic recovery occurred during the later stage of plastic deformation of the ductile Mg-Zn-Ca alloy. These results suggest that the developed Mg-Zn-Ca alloy is a suitable material for biodegradable clips. Statement of significance Since conventional magnesium alloys have not exhibited significant ductility for applying the occlusion of vessels, the alloying of magnesium with essential elements and the control of microstructure by hot extrusion and annealing were conducted. Mechanical characterization revealed that the Mg-Zn-Ca alloy obtained by double extrusion followed by annealing at 673 K for 2 h possessed a fracture strain over 0.40. The biocompatibility of the alloy was confirmed by investigating its degradation behavior and the response of extraperitoneal tissue around the Mg-Zn-Ca alloy. Finite element analysis using the material data for the ductile Mg-Zn-Ca alloy also showed that the clip could occlude the simulated vessel without fracture. In addition, the Mg-Zn-Ca alloy clip successfully occluded the renal vein. Microstructural observations using electron backscattering diffraction confirmed that dynamic recovery occurred during the later stage of plastic deformation of the ductile Mg-Zn-Ca alloy. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.ELSEVIER SCI LTD, 2016年01月, ACTA BIOMATERIALIA, 29, 468 - 476, 英語[査読有り]研究論文(学術雑誌)
- The magnesium composites containing hydroxyapatite (HA) particles were synthesized. Unreacted Mg/HA composites were successfully fabricated by extruding the two component powders. The Young's modulus and strength of the extruded composites were lower than that of extruded magnesium, whereas the damping capacity of the composite was superior to that of extruded magnesium over the entire strain range examined. Microstructural observation of the composite containing 10 vol%HA revealed that HA agglomerates with the size of 10-15 μm were formed during the fabrication. The mechanical properties of the composites were closely associated with the HA agglomeration.Japan Institute of Light Metals, 2016年, 軽金属, 66(6) (6), 318 - 323, 日本語[査読有り]研究論文(学術雑誌)
- Mechanical properties of magnesium alloys under dynamic loading are still unclear. To evaluate the impact fracture behavior of magnesium alloys, we constructed a novel impact three-point bending test apparatus using three elastic bars with Charpy standard-size specimen, and investigated the impact fracture properties of as-cast Mg-3Al-1Zn (hereafter denoted as AZ31) alloy. Finite element (FE) analysis were carried out to estimate the effect of inertial force of the specimen during the impact three-point bending. Based on the FE analysis, we successfully developed a small-scale apparatus for examining a quarter-size specimen, which was capable of carrying out the impact three-point bending test with minimized influence of the inertial force. Impact fracture behavior of Mg-6Al-1Zn-2Ca (hereafter denoted as AZX612) alloy was estimated and compared by using small-scale apparatus. The experimental results pointed out that the AZX612 had similar energy absorption capability to AZ31 against the dynamic loading, however, the crack propagation speed of the Ca bearing alloy was almost twice as fast as that of the AZ31 alloy.JAPAN INST METALS, 2016年, MATERIALS TRANSACTIONS, 57(11) (11), 1872 - 1879, 英語[査読有り]研究論文(学術雑誌)
- 2015年08月, Proceedings of Ti-2015, 英語New powder/solid composite exhibiting low Young’s modulus and energy absorption for biomedical applications fabricated by additive manufacturing[査読有り]研究論文(国際会議プロシーディングス)
- TMS, 2015年03月, Proceedings of TMS 2015 Annual meeting, 英語Effect of Solute Segregation on Fracture Behavior of Mg Alloy[査読有り]研究論文(国際会議プロシーディングス)
- TMS, 2015年03月, Proceedings of TMS 2015 Annual meeting, 英語Degradation Behavior of Mg-Ca Nail after Penetration into Artificial Bone[査読有り]研究論文(国際会議プロシーディングス)
- A clad structure that consists of solid and powder parts was created from powdered Ti-6Al-4V utilizing electron beam melting (EBM) technique by a single process. The input energy density required to melt the raw powder material was controlled by changing the scan speed of the electron beam from 100 to 2000 mm/s. The finished products showed several types of structures: a dense solid, a periodic layered (clad) structure made up of a solid part and an unmelted powder part, and almost full powder. The products with the clad structure showed a combination of low Young's modulus and high toughness as characterized by the presence of a stress plateau in the stress-strain curve. Both of these qualities are necessary for feasibility as implant materials used in orthopedic fields. We conclude that the products developed in this study could be useful as bone implants in terms of the mechanical similarity to bones, despite needing only an single EBM process for fabrication.JAPAN INST METALS, 2015年, Materials Transactions, 56(5) (5), 755 - 758, 英語[査読有り]研究論文(学術雑誌)
- 2015年, Journal of Alloys and Compounds, 639, 336 - 340, 英語Novel powder/solid composites possessing low Young’s modulus and tunable energy absorption capacity, fabricated by electron beam melting, for biomedical applications[査読有り]研究論文(学術雑誌)
- 2014年12月, Journal of Alloys and Compounds, 626, 60 - 64, 英語Effect of deformation twins on damping capacity in extruded pure magnesium[査読有り]研究論文(学術雑誌)
- 2014年07月, Scripta Materialia, 87, 1 - 4, 英語Microyielding and damping capacity in magnesium[査読有り]研究論文(学術雑誌)
- 2014年06月, Metallurgical and Materials Transactions A, 45, 4293 - 4301, 英語Control of Mechanical Properties of Three-Dimensional Ti-6Al-4V Products Fabricatedby Electron Beam Melting with Unidirectional Elongated Pore[査読有り]研究論文(学術雑誌)
- Weight reduction is effective for improving fuel efficiency of automobiles. Although magnesium is widely recognized as the lightest structural metal, applications for the automobile are limited because of the relatively low ductility, toughness, impact resistance and fatigue resistance. The aim of this research was to evaluate the impact energy absorption capability of a magnesium alloy pipe by a numerical simulation. First of all, finite element (FE) analysis of impact compression of magnesium alloy pipes was performed to design the shape of anvils for a dynamic compression experiment. The compression tests were conducted at a high strain rate on two Mg alloys, AZ31 and Mg-0.6Y, to examine the deformation response. The load-displacement data obtained were compared with the results of FE analysis to validate the simulation. The FE analysis revealed that the AZ31 pipe fractured at an early stage of deformation, while the Mg-0.6Y pipe fractured at about 90% compressed. As a result, Mg-0.6Y pipe exhibited lower yield strength, but a higher absorption energy capability than AZ31 pipe due to a weakened basal texture.JAPAN INST METALS, 2014年04月, 日本金属学会誌, 78(4) (4), 142 - 148, 日本語[査読有り]研究論文(学術雑誌)
- 2012年06月, 英語Development of metallic scaffolds for bone replacement based on orientation degree of biological apatite c-axis in long bone
- 2012年, 日本金属学会誌, 76, 468 - 473, 日本語人工股関節置換後にチタン基インプラントより生じた応力遮蔽効果にともなうヒト大腿骨の骨損失および骨質劣化[査読有り]研究論文(学術雑誌)
- 2012年, Proceedings of PM2012, 英語Mechanical Properties of Porous Ti Alloy Products Fabricated by Electron Beam Melting Method[査読有り]研究論文(学術雑誌)
- Recently, more attention has been devoted to porous implants to avoid stress-shielding effects and facilitate anchor effects. In addition, our previous research revealed that uniaxially aligned pores promoted early recovery of bone tissue with high bone quality similar to that of intact bone. In this study, Ti-based implant materials with uniaxially aligned pores were fabricated using the electron beam melting (EBM) method with 2 types of grid spacing, 0.5 and 1.0 mm. Although grid spacing was varied, the constituent phase and microstructure of the products were homogenous regardless of the grid spacing. Uniaxially aligned pores were created when the grid spacing was 1.0 mm, whereas almost solid structures with random pores were formed when the grid spacing was 0.5 mm. Young's modulus of the products with the grid spacing of 1.0 mm was 34 GPa this value is close to that of the bone. It is concluded that the porous material with aligned pores is suitable as a bone implant to reduce stress-shielding effects and to induce bone regeneration with good bone quality. © (2012) Trans Tech Publications, Switzerland.2012年, Advanced Materials Research, 409, 142 - 145, 英語[査読有り]研究論文(国際会議プロシーディングス)
- 日本臨床バイオメカニクス学会, 2011年, 臨床バイオメカニクス, 32, 1 - 8, 日本語[日本臨床バイオメカニクス]学会奨励賞受賞論文 骨質としてのアパタイト配向性を考慮した骨代替用指向性ポーラスインプラントの設計・開発[査読有り]研究論文(学術雑誌)
- Formation of New Bone with Preferentially Oriented Biological Apatite Crystals Using a Novel Cylindrical Implant Containing An isotropic Open Pores Fabricated by the Electron Beam Melting (EBM) MethodNew cylindrical bone implants containing elongated pores interconnected as open pores were fabricated by an electron beam melting (EBM) method using Ti-6mass%Al-4mass%V ELI powder (mean particle diameter, 65 mu m). New bone formation in the elongated pores of the implant and preferential arrangement of biological apatite c-axis were confirmed along the long bone axis by microbeam X-ray diffraction. Bone mass and preferential degree of biological apatite c-axis, which were considered a bone quality parameter, decreased with the distance from the edge of the implant along the longitudinal bone axis because of a stress-shielding effect. Although clear interconnections between new bones appeared through the implant with elongated pores parallel to the bone axis, the defective portion was not covered with new bone in the absence of the new implant.IRON STEEL INST JAPAN KEIDANREN KAIKAN, 2011年, ISIJ INTERNATIONAL, 51(2) (2), 262 - 268, 英語[査読有り]研究論文(学術雑誌)
- 2011年, Proceedings of ECO-MATES, 251 - 252, 英語Fabrication of three dimensional Ti-6Al-4V structures by EBM method研究論文(国際会議プロシーディングス)
- Formation of New Bone with Preferentially Oriented Biological Apatite Crystals Using Novel Cylindrical Implant Containing Anisotropic Open Pores Fabricated by Electron Beam Melting (EBM) MethodNew cylindrical bone implants containing elongated pores interconnected as open pores were fabricated by an electron beam melting (EBM) method from Ti-6 mass% Al-4 mass% V ELI powders of 65 mu m in mean diameter. New bone formed in the elongated pores of implant and preferential arrangement of biological apatite c-axis were confirmed along the long bone axis by the microbeam X-ray diffraction method. Bone mass and preferential degree of biological apatite c-axis as a bone quality parameter decreased with the distance from the edge of implant along the longitudinal bone axis because of a stress shielding effect. However, clear interconnection of new bone appeared through the implant with elongated pores parallel to the bone axis, while the defected portion was not recovered with new bone without the new implant.IRON STEEL INST JAPAN KEIDANREN KAIKAN, 2010年09月, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 96(9) (9), B42 - B48, 日本語[査読有り]研究論文(学術雑誌)
- Our group focused on the preferential degree of biological apatite (BAp) c-axis, an important bone quality parameter based on the microstructural anisotropy in intact, pathological, and regenerated bones. The preferential degree of the BAp c-axis strongly depends on the bone position, in vivo stress distribution, bone growth, degree of pathology and regeneration, activity of bone cells, gene defect, etc. We attempted to challenge clarification of the BAp preferential alignment formation mechanism and control the degree of BAp orientation by using an anisotropic biomaterial design to develop suitable distribution of the BAp c-axis orientation.TRANS TECH PUBLICATIONS LTD, 2010年, PRICM 7, PTS 1-3, 654-656, 2212 - +, 英語[査読有り]研究論文(国際会議プロシーディングス)
- 日本金属学会, 2022年11月01日, まてりあ, 61(11) (11), 731 - 732, 日本語, 国内誌, 国際共著していない記事・総説・解説・論説等(学術雑誌)
- 2020年, 軽金属学会大会講演概要, 138thマグネシウムの衝撃靭性改善に向けたアルミニウムおよび第三元素添加の効果
- 2019年, 軽金属学会大会講演概要, 136thマグネシウムの高速変形特性に及ぼすマンガンの影響
- 2019年, 軽金属学会大会講演概要, 137th第一原理計算によるマグネシウムの衝撃靭性向上に向けた亜鉛添加効果の解明
- 2018年, 軽金属学会大会講演概要, 134thマグネシウムの生体内分解性に与える溶質カルシウム元素の影響
- 2018年, 軽金属学会大会講演概要, 134thマグネシウムの衝撃変形挙動に及ぼす亜鉛濃度の影響
- 2018年, 軽金属学会大会講演概要, 135thマグネシウムの生体内分解性に及ぼす溶質元素添加の影響
- 2018年, 日本金属学会講演概要(CD-ROM), 163rdマグネシウムの粒界強度および塑性異方性に対するマンガンの添加効果
- 2018年, 日本金属学会講演概要(CD-ROM), 162ndマグネシウム合金の粒界強度および塑性異方性に対する溶質元素添加の効果
- 2017年, 日本金属学会講演概要(CD-ROM), 161st生体内分解性Mg-Ca合金の異方性改善に対する第三元素の添加効果
- 2017年, 日本金属学会講演概要(CD-ROM), 160thマグネシウム合金の衝撃破壊靭性に対する溶質元素添加の効果
- 2017年, 日本金属学会講演概要(CD-ROM), 161st亜鉛の生体内分解性に及ぼす元素添加効果
- 2015年, 軽金属学会大会講演概要, 128thMg-Ca合金の転位すべりおよび粒界強化効果に及ぼす第三元素の影響
- 2015年, 日本金属学会講演概要(CD-ROM), 157thMg-Ca合金の衝撃靭性改善に寄与する第三元素添加効果
- 一般社団法人日本機械学会, 2014年03月18日, 関西支部講演会講演論文集, 2014(89) (89), "3 - 21", 日本語312 衝撃荷重下におけるAZ31マグネシウム合金の破壊挙動(OS-4 マグネシウム合金の変形とメカニクス(3))
- 一般社団法人日本機械学会, 2014年03月18日, 関西支部講演会講演論文集, 2014(89) (89), "3 - 28", 日本語319 結晶粒微細化によるMg-Ca二元合金の高強度化(OS-4 マグネシウム合金の変形とメカニクス(5))
- 一般社団法人日本機械学会, 2014年01月10日, バイオエンジニアリング講演会講演論文集, 2014(26) (26), 99 - 100, 日本語1C42 高強度を有する生体内分解性Mg-0.3at.%Ca合金の開発(GS3:生体材料)
- 2014年, 日本金属学会講演概要(CD-ROM), 155thマグネシウムの粒界すべりに及ぼす溶質原子の影響
- ポーラスインプラント インプラントへの応用を目指したチタン基ポーラス材料の創製チタン製インプラントの創製を目指し、新規積層造形法を利用したポーラス材料の開発および力学機能制御因子の解明を試みた。大阪工研協会, 2013年12月, 科学と工業 = Science and industry, 87(12) (12), 428 - 432, 日本語記事・総説・解説・論説等(学術雑誌)
- 日本金属学会, 2013年11月, まてりあ, 52(11) (11), 531 - 531, 日本語その他
- 2013年, 軽金属学会大会講演概要, 124th電子ビーム積層造形法を用いた一方向孔を有する多孔質構造体の作製と力学機能制御
- 2013年, 日本金属学会講演概要(CD-ROM), 152nd構造および材質制御したCo-Cr-Mo構造体における力学的異方性発現
- Bone tissue is predominantly composed of biological apatite (BAp) crystals and collagen (Col) fibers, which shows hierarchical structure at various scale levels. Therefore, to design and develop implants suitable for bone replacement, both bone mineral density (BMD) and bone anisotropic microstructure should be investigated. From the viewpoint of materials scientific study, the bone microstructure based on the orientation degree of BAp c-axis which is dependent upon the bone portion, turnover, cell arrangement, etc., was clarified in intact, pathological and regenerated bones. For the analysis of BAp orientation, the microbeam X-ray diffraction method is quite effective on the basis of crystallography of anisotropic hexagonal BAp crystal. Moreover, this method is applicable even to a small region of several 10 μm or more on a side. Therefore, advanced design of implants for bone replacement should take into account anisotropic bone microstructure containing preferential alignment of BAp/Col.Springer Japan, 2013年01月01日, Progress in Advanced Structural and Functional Materials Design, 155 - 167, 英語
- The present work was aimed at understanding the stress shielding caused by hip joint implantation into a femur by using a human cadaver with a cementless hip implant. In particular, bone quality was assessed from the standpoint of preferential c axis orientation of biological apatite (BAp). Comparing the implanted side to the non implanted side, a finite element analysis (PEA) indicated that artificial hip joint implantation had a significant stress shielding on the femur. The results also showed a remarkable decrease in the degree of preferential BAp orientation as well as bone loss in Haversial canal in the medial proximal femur. This is the first report showing a reduction in the degree of preferential BAp orientation due to a stress shielding after artificial hip joint implantation. Since preferential BAp orientation is an important parameter for determining bone mechanical function, these findings should be taken into account in future artificial hip joint designs, especially those involving the stem component.JAPAN INST METALS, 2012年07月, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 76(7) (7), 468 - 473, 日本語
- 2012年, 日本バイオマテリアル学会シンポジウム予稿集, 2012生体機能化のための生体用Ti系・Co系合金の積層造形
- 2012年, 日本金属学会講演概要(CD-ROM), 151st電子ビーム積層造形法によるハニカム構造体化と力学的異方性
- 2010年, 池谷科学技術財団 平成21年度 研究成果報告, 日本語三次元電子ビーム造形法による生体親和性金属インプラントの開発その他
- その他, 日本医学館, 2013年, 日本語未来型人工関節を目指して-その歴史から将来展望まで- 6-4-3. レーザービームを用いたシンタリング法学術書
- その他, シュプリンガー, 2012年, 英語Progress in Advanced Structural and Functional Materials Design学術書
- 10th ISAJ Symposium Interdisciplinary Science and Technology Innovations for Sustainable Society, 2019年12月, 英語Evaluation of in-vitro fatigue properties of Mg-Ca alloy with fine grains口頭発表(一般)
- 第2回 日本金属学会 第7分野講演会, 2019年12月, 日本語亜鉛の機械的性質・生体内分解性に及ぼすストロンチウムの効果ポスター発表
- 第2回 日本金属学会 第7分野講演会, 2019年12月, 日本語生体内分解性Mg-Ca合金ネイルの骨構造への貫入特性評価ポスター発表
- 第2回 日本金属学会 第7分野講演会, 2019年12月, 日本語マグネシウムの分解性および変形能に対する溶質マンガンの影響ポスター発表
- 第41回日本バイオマテリアル学会大会, 2019年11月, 日本語生体内分解性 Mg 合金の in vitro 疲労寿命に対する内部組織の影響口頭発表(一般)
- 第41回日本バイオマテリアル学会大会, 2019年11月, 日本語亜鉛合金の機械的性質及び生体内分解性に対するストロンチウム添加の影響ポスター発表
- 第41回日本バイオマテリアル学会大会, 2019年11月, 日本語骨構造への貫入時における生体内分解性 Mg-Ca 合金ネイルの変形挙動ポスター発表
- 軽金属学会第137回秋期大会, 2019年11月, 日本語衝撃荷重下におけるMg-Ca二元合金の高温圧縮変形応答ポスター発表
- 軽金属学会第137回秋期大会, 2019年11月, 日本語高温高速せん断変形による高濃度マグネシウム添加AL-Mg合金の結晶粒微細化ポスター発表
- 軽金属学会第137回秋期大会, 2019年11月, 日本語第一原理計算によるマグネシウムの衝撃靭性向上に向けた亜鉛添加効果の解明ポスター発表
- 日本金属学会2019年秋期講演(第 165回)大会, 2019年09月, 日本語マグネシウムの対応粒界における粒界エネルギーと粒界凝集エネルギーの相関ポスター発表
- 日本金属学会2019年秋期講演(第 165回)大会, 2019年09月, 日本語マグネシウムの衝撃破壊靭性に対するマンガン添加の影響ポスター発表
- the 11th Symposium on Biodegradable Metals, 2019年08月, 英語Mechanical response of high-strength Mg-Ca alloy nail penetrating bone tissueポスター発表
- 軽金属学会第136回春期大会, 2019年05月, 日本語マグネシウムの一軸引張および圧縮変形挙動に及ぼすカルシウム添加効果ポスター発表
- 日本金属学会2019年春期講演(第 164回)大会, 2019年03月, 日本語Mg–0.2 at.% Ca/α-TCP 複合材の作製と特性評価口頭発表(一般)
- 日本金属学会2019年春期講演(第 164回)大会, 2019年03月, 日本語β-TCP 粒子分散マグネシウム合金基複合材料の機械的特性口頭発表(一般)
- 日本金属学会2019年春期講演(第 164回)大会, 2019年03月, 日本語構造制御によるマグネシウム基コンポジットの高機能化に 関する基礎研究ポスター発表
- 日本金属学会2019年春期講演(第 164回)大会, 2019年03月, 日本語CoCrFeMnNi 等量組成合金の変形挙動に及ぼすひずみ速度の影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2019年01月, 日本語純マグネシウムの生体内分解性に及ぼす変形双晶の影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2019年01月, 日本語Mg-Zn二元合金の衝撃破壊特性ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2019年01月, 日本語マグネシウムの粒界強度と塑性異方性に及ぼすマンガンおよびランタンの影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2019年01月, 日本語生体内分解性Mg-Zn-Caのin vitro疲労寿命に及ぼす結晶粒微細化の影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2019年01月, 日本語超高速衝撃荷重下におけるマグネシウム合金の変形挙動口頭発表(一般)
- 軽金属学会第135回秋期大会, 2018年11月, 英語マグネシウムの生体内分解性に及ぼす溶質元素添加の影響ポスター発表
- 軽金属学会第135回秋期大会, 2018年11月, 日本語超高速衝撃荷重下におけるマグネシウム合金の変形挙動に及ぼす溶質イットリウムの影響ポスター発表
- 軽金属学会第135回秋期大会, 2018年11月, 日本語マグネシウム合金における変形応力のひずみ速度依存性に及ぼすCaの影響ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月, 日本語構造および組織制御による生体用金属材料の高機能化口頭発表(一般)
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月, 日本語CoCrFeMnNi の圧縮変形特性に及ぼすひずみ速度および温度の影響ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月亜鉛における流動応力のひずみ速度依存性および変形機構ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月, 日本語超高速衝突変形によるマグネシウムの内部組織変化ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月マグネシウムの粒界強度および塑性異方性に対するマンガンの添加効果ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月, 日本語生体内分解性 Mg-Zn-Ca 合金の in vitro 疲労寿命に及ぼす結晶粒微細化の効果ポスター発表
- 日本金属学会2018年秋期講演(第 163回)大会, 2018年09月, 日本語純マグネシウムの生体内分解性に及ぼす圧縮ひずみの影響ポスター発表
- Mg2018, 2018年07月, 英語Effect of Zinc Solute on Fatigue Properties of Magnesium in Vitro口頭発表(一般)
- 2018年07月, 英語Effect of Calcium Solute on Mechanical Properties and Bio-degradability of Magnesiumポスター発表
- 軽金属学会第134回春期大会, 2018年05月, 日本語マグネシウムの衝撃変形挙動に及ぼす亜鉛濃度の影響ポスター発表
- 軽金属学会第134回春期大会, 2018年05月, 英語マグネシウムの生体内分解性に与える溶質カルシウム元素の影響ポスター発表
- TMS 2018, 2018年03月, 英語Effect of Additive Zinc on Mechanical Properties and Degradation Behavior of Magnesium口頭発表(一般)
- TMS 2018, 2018年03月, 英語Development of a New Biodegradable Surgical Clip Made of a Magnesium Alloy: Evaluation of its Safety and Tolerability for Canine Cholecystectomy口頭発表(一般)
- TMS 2018, 2018年03月, 英語Enhancing Impact Toughness of Mg-3%Al-1%Zn Alloy by Grain Structure Modification口頭発表(一般)
- 日本金属学会2018年春期講演大会, 2018年03月, 日本語, 国内会議マグネシウム合金の粒界強度および塑性異方性に対する溶質元素添加の効果ポスター発表
- 平成29年度宇宙科学に関する室内実験シンポジウム, 2018年02月, 日本語, 国内会議等軸結晶粒からなる純マグネシウムの超高速衝撃荷重下における組織変化ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議超高速衝撃下における純マグネシウムの組織変化ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議生体内分解性マグネシウム合金の機械的性質に対する添加元素の役割解明ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議高温高速せん断変形させたAl-Mg合金の組織変化に及ぼすシリコン添加の影響口頭発表(一般)
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議亜鉛の生体内分解性に及ぼす結晶配向および元素添加の影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議マグネシウム合金の衝撃破壊特性に及ぼすカルシウムおよび亜鉛添加の影響ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議マグネシウム基コンポジットの機械的性質評価ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2017年12月, 日本語, 国内会議マグネシウムの生体内分解性に及ぼすカルシウム添加の影響ポスター発表
- 軽金属学会第133回秋期大会, 2017年11月, 日本語, 国内会議衝撃荷重下におけるMg-4%Al-1%Ca合金の変形挙動口頭発表(一般)
- 軽金属学会第133回秋期大会, 2017年11月, 日本語, 国内会議高温高速せん断変形させたAl-4%Mg合金の組織変化におよぼすシリコン添加の影響口頭発表(一般)
- 軽金属学会第133回秋期大会, 2017年11月, 日本語, 国内会議マグネシウム基アパタイト複合材料の機械的性質評価ポスター発表
- 第12回材料の衝撃問題シンポジウム, 2017年10月, 日本語, 国内会議衝撃圧縮荷重下におけるMg-Ca合金の変形応答に及ぼすCa添加の影響ポスター発表
- 第12回材料の衝撃問題シンポジウム, 2017年10月, 日本語, 国内会議純マグネシウムの超高速衝撃荷重下における変形応答ポスター発表
- 第12回材料の衝撃問題シンポジウム, 2017年10月, 日本語, 国内会議強ひずみ加工によるMg-3Al-1Zn合金の高靱性化ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議超高速衝撃荷重が作用した純マグネシウムの変形応答口頭発表(一般)
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議生体内分解性Mg-Ca合金の異方性改善に対する第三元素の添加効果ポスター発表
- 日本金属学会2017 年秋期講演大会, 2017年09月, 日本語, 国内会議水酸アパタイト分散マグネシウム合金基複合材料の組織と 機械的特性口頭発表(一般)
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議純亜鉛の圧縮変形に伴う組織変化ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議高温衝撃せん断ひずみ付与にともなうAl-Mg-Si合金の組織変化ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議亜鉛の生体内分解性に及ぼす結晶配向の影響ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議マグネシウム-亜鉛合金の分解性に及ぼす集合組織の影響ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議マグネシウムの衝撃破壊特性に及ぼすカルシウムおよび亜鉛の添加効果ポスター発表
- 日本金属学会2017年秋期講演大会, 2017年09月, 日本語, 国内会議CoCrFeMnNi系高エントロピー合金の室温変形メカニズムに関する基礎研究ポスター発表
- 日本バイオマテリアル学会関西ブロック第12回若手研究発表会, 2017年08月, 日本語, 国内会議亜鉛の生体内分解性に及ぼす元素添加効果ポスター発表
- The 7th Asian Symposium on Magnesium Alloys (ASMA7), 2017年06月, 英語, 国際会議Effect of solute atoms on dynamic fracture toughness in magnesium alloysポスター発表
- The 7th Asian Symposium on Magnesium Alloys (ASMA7), 2017年06月, 英語, 国際会議Effect of calcium on compressive deformation response of Mg-Ca alloyポスター発表
- 軽金属学会第132回春期大会, 2017年05月, 日本語, 国内会議高温高速せん断ひずみ付与にともなうAl-Mg-Si合金の組織変化ポスター発表
- 軽金属学会第132回春期大会, 2017年05月, 日本語, 国内会議マグネシウムの高速圧縮変形挙動に及ぼすカルシウムの添加効果ポスター発表
- TMS 2017, 2017年03月, 英語Evaluation of In Vitro Fatigue Properties of Biodegradable Mg-0.3at.%Ca Alloy口頭発表(一般)
- 平成28年度関西学生会学生員卒業研究発表講演会, 2017年03月, 日本語純マグネシウムの生体内分解性に及ぼす結晶粒径の影響口頭発表(一般)
- 平成28年度関西学生会学生員卒業研究発表講演会, 2017年03月, 日本語超高速衝突の作用によるマグネシウムの変形応答口頭発表(一般)
- 平成28年度関西学生会学生員卒業研究発表講演会, 2017年03月, 日本語亜鉛の常温圧縮変形挙動に及ぼす結晶粒径の影響口頭発表(一般)
- 平成28年度関西学生会学生員卒業研究発表講演会, 2017年03月, 日本語マグネシウム合金の粒界すべり変形に対するカルシウムおよび第三元素の影響口頭発表(一般)
- 平成28年度関西学生会学生員卒業研究発表講演会, 2017年03月, 日本語衝撃荷重作用下におけるマグネシウムの圧縮降伏応力に及ぼすカルシウム添加の効果口頭発表(一般)
- 日本金属学会 2017 年春期講演大会(第160回), 2017年03月, 日本語, 国内会議マルチパス溝ロール圧延による Mg-3Al-1Zn 合金の結晶組織制御ポスター発表
- 日本金属学会 2017 年春期講演大会(第160回), 2017年03月, 日本語, 国内会議マグネシウム合金の衝撃破壊靭性に対する溶質元素添加の効果ポスター発表
- 日本金属学会 2017 年春期講演大会(第160回), 2017年03月, 日本語, 国内会議マグネシウムのin vitro疲労特性に与えるカルシウム添加の影響口頭発表(一般)
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2016年12月, 日本語生体内分解性インプラントに向けたMg-Zn合金の組織制御口頭発表(一般)
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2016年12月, 日本語高エネルギー付与による純マグネシウムの組織変化に関する研究ポスター発表
- 2016年12月, 日本語vitro疲労強度に及ぼす亜鉛およびカルシウムの添加効果ポスター発表
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2016年12月, 日本語高温衝撃圧縮荷重の作用によるAl-Mg-Si合金の組織変化ポスター発表
- 軽金属学会関西支部, 2016年12月, 日本語強ひずみ圧延加工による Mg-3Al-1Zn合金の衝撃破壊靱性改善, 2016/12ポスター発表
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議生体内分解性マグネシウム合金の疲労特性に及ぼすZn添加の影響ポスター発表
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議衝撃荷重下におけるAl-Mg二元合金の変形挙動口頭発表(一般)
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議高強度マグネシウム合金の骨組織への貫入応答評価口頭発表(一般)
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議高温衝撃圧縮荷重の作用によるAlMg-Si合金の組織変化ポスター発表
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議強度および生体内分解速度の最適化に向けたMg-Zn合金のミクロ組織制御口頭発表(一般)
- 軽金属学会 第 131 回秋期大会, 2016年11月, 日本語, 国内会議強ひずみ圧延加工によるMg-3Al-1Zn合金の衝撃破壊靱性改善ポスター発表
- The 9th International Symposium on Impact Engineering, 2016年09月, 英語Deformation behavior of Pure Magnesium at dynamic strain rates in compression口頭発表(一般)
- The 9th International Symposium on Impact Engineering, 2016年09月, 英語Formation of shear band in CoCrFeMnNi high-entropy alloy under dynamic loading口頭発表(一般)
- 日本金属学会 2016 年秋期講演大会(第159回), 2016年09月, 日本語, 国内会議高温・衝撃荷重下における純マグネシウムの圧縮変形応答ポスター発表
- 日本金属学会 2016 年秋期講演大会(第159回), 2016年09月, 日本語, 国内会議マグネシウム合金の疲労特性に及ぼす Ca および Zn の添加効果ポスター発表
- 軽金属学会主催第98回シンポジウム(マグネシウム材料の新展開), 2016年06月, 日本語生体内分解性医療用デバイスの開発に向けたマグネシウム合金の機械的性質の改善シンポジウム・ワークショップパネル(指名)
- 軽金属学会 第 130 回春期大会, 2016年05月, 日本語, 国内会議Al-Mg二元合金の粒界強度に及ぼす溶質マグネシウム濃度の影響口頭発表(一般)
- 平成27年度関西学生会学生員卒業研究発表講演会, 2016年03月, 日本語FeCrCoMnNi 合金の圧縮変形応答と変形メカニズム口頭発表(一般)
- 平成27年度関西学生会学生員卒業研究発表講演会, 2016年03月, 日本語亜鉛の結晶粒微細化による強度-延性バランス改善口頭発表(一般)
- 平成27年度関西学生会学生員卒業研究発表講演会, 2016年03月カルシウムおよび第3元素添加によるマグネシウム合金の粒界強化効果,,2016/03
- 平成27年度関西学生会学生員卒業研究発表講演会, 2016年03月カルシウムおよび亜鉛添加によるマグネシウム合金の高延性化,,2016/03
- 平成27年度関西学生会学生員卒業研究発表講演会, 2016年03月, 日本語強ひずみ圧延加工による Al-Mg-Si 合金の高強度化口頭発表(一般)
- 日本金属学会 2016 年春期講演大会(第 158 回), 2016年03月, 日本語, 国内会議有限要素解析を利用した生体内分解性マグネシウム合金製ステントの創製口頭発表(一般)
- 日本金属学会 2016 年春期講演大会(第 158 回), 2016年03月, 日本語, 国内会議生体内分解性 Mg-Zn 合金の高強度化および分解性評価ポスター発表
- 日本金属学会 2016 年春期講演大会(第 158 回), 2016年03月, 日本語, 国内会議衝撃荷重下における純マグネシウムの一軸圧縮変形応答ポスター発表
- 日本金属学会 2016 年春期講演大会(第 158 回), 2016年03月, 日本語, 国内会議高速変形による CoCrFeMnNi 系 HEA の変形帯形成ポスター発表
- TMS Annual meeting, 2016年03月, 英語, 国際会議Lattice Ordering and Microstructure of Ultra-High Strength Mg-Ca-Zn Alloys口頭発表(一般)
- 軽金属学会関西支部 若手研究者・院生による研究発表会, 2015年12月, 日本語生体内分解性クリップに向けたマグネシウム合金の組織制御口頭発表(一般)
- Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV) 2015, 2015年12月, 英語, 国際会議The mechanical performance of biodegradability magnesium alloy stent口頭発表(招待・特別)
- Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV) 2015, 2015年12月, 英語, 国際会議Influence of calcium concentration on superplastic behavior in Mg-Ca binary alloys口頭発表(一般)
- Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV) 2015, 2015年12月, 英語, 国際会議Evaluation of in vitro fatigue of the biodegradable Mg-Ca alloy in simulated body fluid[招待有り]口頭発表(招待・特別)
- Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV) 2015, 2015年12月, 英語, 国際会議Effect of calcium solute addition on improving mechanical properties of magnesium alloys口頭発表(一般)
- 軽金属学会第129回秋期大会, 2015年11月, 日本語Mg-Ca合金のダンピング特性に及ぼす集合組織の影響口頭発表(一般)
- 軽金属学会第129回秋期大会, 2015年11月, 日本語生体内分解性マグネシウム合金製ステントの機械的性能ポスター発表
- 軽金属学会第129回秋期大会, 2015年11月, 日本語強ひずみ圧延加工によるAl-Mg合金の組織変化ポスター発表
- 日本金属学会2015年秋期(157回)大会, 2015年09月, 日本語生体軟組織固定用マグネシウム合金の生体内分解性および安全性評価口頭発表(一般)
- 日本金属学会2015年秋期(157回)大会, 2015年09月, 日本語生体内分解性マグネシウム合金製クリップによる血管閉鎖の試行口頭発表(一般)
- 日本金属学会2015年秋期(157回)大会, 2015年09月, 日本語Mg-Ca合金の衝撃靭性改善に寄与する第三元素添加効果ポスター発表
- 日本金属学会2015年秋期(157回)大会, 2015年09月, 日本語強ひずみ圧延加工によるCoCrFeMnNi系HEAの高強度化ポスター発表
- ICSAM 2015, 2015年09月, 英語, 国際会議Superplastic Deformation Behavior in Dual-Phase Mg-Ca Alloy口頭発表(一般)
- Mg 2015, 2015年09月, 英語, 国際会議Effect of Zinc and Calcium Solute Additions on Deformation Behavior of Mg Estimated by First Principles Calculation口頭発表(一般)
- Ti 2015, 2015年08月, 英語, 国際会議New Powder/Solid Composite Exhibiting Low Young’s Modulus and Energy Absorption for Biomedical Applications Fabricated by Additive Manufacturing口頭発表(一般)
- Biomaterials International 2015, 2015年06月, 英語, 国際会議Strength ening and Degradation Behavior of Magnesium-Cal cium Binary Alloy口頭発表(一般)
- Biomaterials International 2015, 2015年06月, 英語, 国際会議Experimental Study of Enhancing strength and ductility in Mg-Zn-Ca alloy for bio-absorbable stent application口頭発表(一般)
- Biomaterials International 2015, 2015年06月, 英語, 国際会議Enhancement of ductility in Mg-Zn-Ca alloy for fastening soft tissue口頭発表(一般)
- 軽金属学会第128回春期大会, 2015年05月, 日本語Mg-Ca合金の転位すべりおよび粒界強化効果に及ぼす第三元素の影響ポスター発表
- TMS 2015 144th ANNUAL MEETING & EXHIBITION, 2015年03月, 英語Degradation Behavior of Mg-Ca Nail after Penetration into Artificial Bone口頭発表(一般)
- TMS 2015 144th ANNUAL MEETING & EXHIBITION, 2015年03月, 英語Effect of Solute Segregation on Fracture Behavior of Mg Alloy口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議第三元素の添加による Mg-Ca 合金の粒界強化効果口頭発表(一般)
- 日本金属学会第156回 春期講演大会, 2015年03月, 日本語, 国内会議双晶を導入した純マグネシウムの減衰能口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議生体内分解性 Mg-Zn 合金の強度-分解性バランス口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議強ひずみ加工による CoCrFeMnNi 合金の高強度化口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議強ひずみ加工による Al-Mg 合金の高強度化口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議亜鉛添加による生体内分解性マグネシウム合金の高強度化口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議マグネシウム合金の加工硬化挙動に及ぼすイットリウム添加の影響口頭発表(一般)
- 日本機械学会関西支部 平成26年度関西学生会学生員卒業研究発表講演会, 2015年03月, 日本語, 国内会議ECAE 加工を施した Mg-Ca 合金の機械的特性口頭発表(一般)
- 軽金属学会第127回秋期大会, 2014年11月, 日本語, 国内会議生体分解性デバイス向けたマグネシウム合金の 高延性化口頭発表(一般)
- 軽金属学会第127回秋期大会, 2014年11月, 日本語, 国内会議生体内分解性Mg-Ca合金の擬似体液環境に おける疲労特性口頭発表(一般)
- 軽金属学会第127回秋期大会, 2014年11月, 日本語, 国内会議Mg-Ca系二相合金の高温変形特性ポスター発表
- 日本金属学会第155回 秋期講演大会, 2014年09月, 日本語, 国内会議生体用マグネシウム合金の機械的性質に与えるカルシウム濃度の影響口頭発表(一般)
- 日本金属学会第155回 秋期講演大会, 2014年09月, 日本語, 国内会議生体軟組織固定に向けたマグネシウム合金の高延性化ポスター発表
- 日本金属学会第155回 秋期講演大会, 2014年09月, 日本語, 国内会議生体内分解性を有するマグネシウム・ステント創製に向け た材料およびモデルの検討ポスター発表
- 日本金属学会第155回 秋期講演大会, 2014年09月, 日本語, 国内会議純マグネシウムにおける一軸変形応答と減衰能の対比口頭発表(一般)
- 日本金属学会第155回 秋期講演大会, 2014年09月, 日本語, 国内会議マグネシウムの粒界すべりに及ぼす溶質原子の影響ポスター発表
- 日本金属学会春期(154回)大会, 2014年03月, 日本語, 国内会議人工骨に対するマグネシウム合金製ネイルの貫入性能評価口頭発表(一般)
- 日本機械学会 第26回バイオエンジニアリング講演会, 2014年01月, 日本語, 国内会議高強度を有する生体内分解性 Mg-0.3at.%Ca 合金の開発口頭発表(一般)
- International Symposium on EcoTopia Science 2014, 2013年12月, 英語, 国際会議Strength and in vitro degradation behavior of fine-grained Mg-Ca alloysポスター発表
- International Symposium on EcoTopia Science 2013, 2013年12月, 英語, 国際会議Mechanical Response of Mg-Ca Alloy Nails Penetrating the Bone Tissue and Their in vitro Degradation Behaviorポスター発表
- International Symposium on EcoTopia Science 2015, 2013年12月, 英語, 国際会議Enhancement of Damping Capacity in Magnesium for Biomedical Implant Applicationポスター発表
- 軽金属学会第125回秋期大会, 2013年11月, 日本語微細結晶粒Mg-Ca合金の引張強度に及ぼすカルシウム濃度の影響口頭発表(一般)
- 軽金属学会秋期(124回)大会, 2013年11月, 日本語, 国内会議Mg-Ca合金の生体内分解性および力学特性に及ぼすカルシウム濃度の影響ポスター発表
- 軽金属学会秋期(124回)大会, 2013年11月, 日本語, 国内会議AZ31マグネシウム合金の衝撃破壊靭性に及ぼす結晶組織の影響ポスター発表
- 日本金属学会秋期(153回)大会, 2013年09月, 日本語, 国内会議カルシウム添加したマグネシウム合金の擬似体液中における分解挙動口頭発表(一般)
- PRICM 8, 2013年08月, 英語, Hawaii, 国際会議Degradation behavior and mechanical properties of Mg-Ca alloy after immersion in simulated body fluid口頭発表(一般)
- 軽金属学会春期(123回)大会, 2013年05月, 日本語, 国内会議電子ビーム積層造形法を用いた一方向孔を有する多孔質構造体の作製と力学機能制御口頭発表(一般)
- 日本機械学会 関西学生会平成24年度学生員卒業研究発表講演会, 2013年03月, 日本語, 国内会議β型Mg-Li系合金の高温変形特性口頭発表(一般)
- 日本金属学会春期(152回)大会, 2013年03月, 日本語, 国内会議カルシウム添加によるマグネシウム合金の高強度化と生体内分解性評価口頭発表(一般)
- 日本金属学会2013年春期(第152回)講演大会, 2013年03月, 日本語, 国内会議カルシウム添加によるマグネシウム合金の高強度化と生体内分解性評価口頭発表(一般)
- 日本機械学会 関西学生会平成24年度学生員卒業研究発表講演会, 2013年03月, 日本語, 国内会議Mg-Ca合金のin vitro分解性および力学的特性評価口頭発表(一般)
- 東北大学金属材料研究所共同研究ワークショップ・第35回日本バイオマテリアル学会東北地域講演会, 2013年, 日本語, 国内会議生体内分解性マグネシウム合金の強度・分解性制御[招待有り]口頭発表(招待・特別)
- 日本バイオマテリアル学会シンポジウム, 2012年11月生体機能化のためのTi系・Co系合金の積層造形シンポジウム・ワークショップパネル(指名)
- 粉体粉末冶金協会秋期(108回)大会, 2012年11月, 日本語生体骨微細構造を考慮した電子ビーム積層造影法による造形体の創製口頭発表(一般)
- PM2012(Powder Metallurgy World Congress and Exhibition), 2012年10月, 英語Mechanical properties of porous Ti alloy products fabricated by electron beam melting method口頭発表(一般)
- 日本金属学会秋期(151回)大会, 2012年09月, 日本語21電子ビーム積層造形法によるハニカム構造体化と力学的異方性口頭発表(一般)
- 日本金属学会秋期(150回)大会, 2012年03月, 日本語積層造形法による多孔質構造体の気孔形状設計の最適化と力学機能制御口頭発表(一般)
- 日本鉄鋼協会・日本金属学会関西支部 材料開発研究会 平成 23年度第 3 回研究会, 2011年12月, 日本語EBM法により作製したTi-6Al-4V多孔質構造体の微細組織観察ポスター発表
- 日本金属学会秋期(149回)大会, 2011年11月電子ビーム造形法により作製したTi-6Al-4V構造体の微細組織観察ポスター発表
- ECO-MATES 2011, 2011年11月, 英語Fabrication of three dimensional Ti-6Al-4V structures by EBM methodポスター発表
- 粉体粉末冶金協会秋期(108回)大会, 2011年10月, 日本語電子ビーム造形法によるインプラント構造の最適化口頭発表(一般)
- 粉体粉末冶金協会秋期(106回)大会, 2011年09月, 日本語電子ビーム造形法によるTi合金製インプラントの高機能化口頭発表(一般)
- Thermec 2011, 2011年08月, 英語Fabrication and Characterization of Porous Implant Products with Aligned Pores by EBM Method for Biomedical Application口頭発表(一般)
- 平成27年度関西学生会学生員卒業研究発表講演会, 2011年06月, 日本語強ひずみ圧延加工による Mg-Al-Zn 合金の結晶組織制御口頭発表(一般)
- 粉体粉末冶金協会春期(107回)大会, 2011年05月, 日本語電子ビーム走査速度制御による力学特性制御口頭発表(一般)
- 加工プロセスによる材料新機能発現 第176委員会 第18回研究会, 2011年03月, 日本語電子ビーム造形法による三次元構造体の多孔質化ポスター発表
- The 15th Academic Exchange Seminar between Shanghai Jiao Tong University and Osaka University, 2010年10月, 英語Control of mechanical properties of Ti-6Al-4V biomedical implant by Electron Beam Melting口頭発表(一般)
- 日本金属学会秋期(147回)大会, 2010年09月, 日本語電子ビーム造形法による構造体の力学特性の電子ビーム走査速度依存性口頭発表(一般)
- 日本バイオマテリアル学会 第4回関西若手発表会, 2010年08月, 日本語電子ビーム造形法により作製したチタン合金インプラントの力学特性制御口頭発表(一般)
- 日本金属学会春期(146回)大会, 2010年03月, 日本語電子ビーム造形法による多孔体の力学特性制御口頭発表(一般)
- 日本金属学会春期(146回)大会, 2010年03月, 日本語生体用Ti合金製多孔体の力学特性の熱処理温度依存性口頭発表(一般)
- 粉体粉末冶金協会秋期(104回)大会, 2009年10月, 日本語電子ビーム造形法によるTi-6Al-4V多孔体の作製口頭発表(一般)
- 日本金属学会秋期(145回)大会, 2009年09月, 日本語電子ビーム造形法による三次元構造体の力学的生体適合化口頭発表(一般)
- 日本金属学会春期(144回)大会, 2009年03月, 日本語電子ビーム造形法による三次元多孔体の作製と微細組織観察口頭発表(一般)
- 日本金属学会春期(142回)大会, 2008年03月, 日本語窒素雰囲気中メカニカルミリングを施した Sm-Fe 合金粉末によるアンモニア合成口頭発表(一般)
- 日本学術振興会, 科学研究費助成事業, 基盤研究(C), 神戸大学, 2020年04月01日 - 2023年03月31日マグネシウム/リン酸カルシウム積層複合材の創製生体内分解性および優れた生体適合性のみならず、生体組織類似の異方性構造を有し、生体組織と高い親和性を発揮しうるマグネシウム/リン酸カルシウム複合材の創製を目指し、本研究ではマグネシウム/リン酸カルシウム積層複合材の創製およびその機能制御を試みる。 本年度は、マグネシウム/ハイドロキシアパタイト積層複合材を作製し、その機能を評価するとともに、接合条件の制御による機能制御を試みた。 湿式法を通じて得られたハイドロキシアパタイトを被覆したマグネシウム材の熱間接合により、異方的な構造を有するマグネシウム/ハイドロキシアパタイト積層複合材の創製を実現した。 本複合材の強度は、圧下率の上昇および強化材であるハイドロキシアパタイトの体積率にともない単調に増加した。破断伸びは、圧下率の増加にともない改善した。また、生体内分解性の指標である分解抵抗は、擬似体液内で安定なハイドロキシアパタイトの体積率に依存して単調に増加した。XRDでは、本手法における反応生成物の形成は認められなかったことから、積層複合材の強度および生体内分解性はハイドロキシアパタイトの体積率により制御できると考えられる。 以上の結果は、マグネシウムと同様に生体内分解性を示すβーリン酸三カルシウムを用いた積層複合材と同様である。したがって、マグネシウム/リン酸カルシウム積層複合材の機能制御にあたっては、リン酸カルシウム層の体積率の制御が非常に重要であることが明らかとなった。
- 科学研究費補助金/基盤研究(A), 2017年04月 - 2021年03月競争的資金
- 日本学術振興会, 科学研究費助成事業, 基盤研究(C), 2016年04月01日 - 2020年03月31日骨再生治療に適用するマグネシウム基複合材料の創製とその超塑性マイクロ加工本研究では、骨再生治療で用いられる骨補填材の素材としての利用を想定して、生体吸収性セラミックであるリン酸三カルシウムを分散したMg-Ca合金基の複合材料を開発した。この複合材料は、原料となる2つの粉末を押出しによって固化することで得た。得られた複合材料は微細な結晶粒を有していた。結晶粒微細化の結果、高温で超塑性が発現することを明らかにした。この複合材料に対して、超塑性マイクロ加工を行うことができた。
- 学術研究助成基金助成金/若手研究, 2018年04月 - 2020年03月, 研究代表者Mg-Ca合金のin vitro疲労特性に及ぼす結晶粒径の影響の解明競争的資金
- 科学研究費補助金/基盤研究(B), 2017年04月 - 2020年03月競争的資金
- 学術研究助成基金助成金/基盤研究(C), 2015年04月 - 2018年03月, 研究代表者競争的資金
- 科学研究費補助金/基盤研究(A), 2013年04月 - 2016年03月競争的資金
- 学術研究助成基金助成金/若手研究(B), 2013年04月 - 2015年03月, 研究代表者競争的資金