SEARCH
Search Details
NUMA MasahiroGraduate School of Engineering / Department of Electrical and Electronic EngineeringProfessor
Research activity information
■ Award- Sep. 2017 東京大学VDEC, 平成29年度VDECデザイナーズフォーラム, 優秀賞, 超低消費電力32-kHzリアルタイムクロック生成回路Japan society
- Sep. 2017 IEEE SSCS Japan Chapter, IEEE SSCS Japan Chapter VDEC Design Award, 超低消費電力32-kHzリアルタイムクロック生成回路Japan society
- May 2017 IEEE SSCS Japan Chapter, IEEE SSCS Japan Chapter Academic Research Award, リアルタイムクロックに向けた電流比較型超低電力フルオンチップRC発振器Japan society
- Aug. 2016 平成28年度 VDECデザイ ナーズフォーラム, 優秀賞, 1マイクロ秒以内の高速起動を特徴とする高精度32-MHz弛張発振器Japan society
- Jun. 2016 14th IEEE International NEWCAS Conference, Best Student Paper Award, A fully integrated, 1-us start-up time, 32-MHz relaxation oscillator for low-power intermittent systemsInternational society
- May 2016 電子情報通信学会集積回路研究専門委員会, IEEE SSCS Japan Chapter Academic Research Award, 間欠動作型VLSIシステムに向けた高速起動可能な32-MHzフルオンチップ弛張発振器Japan society
- Mar. 2024, The 25th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2024), 187 - 192, EnglishLightweight monocular depth estimation network using separable convolution[Refereed]
- Mar. 2024, The 25th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2024), 125 - 130, EnglishAn error diagnosis technique based on location variable simulation employing dedicated multiplicity-limiter function and ordering for input patterns[Refereed]
- Mar. 2024, The 25th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2024), 95 - 100, EnglishA CNN network suitable for fpga implementation in surveillance camera systems[Refereed]
- 2024, IEICE Trans. Fundam. Electron. Commun. Comput. Sci., 107(3) (3), 592 - 599Scientific journal
- Abstract This paper proposes a switched-capacitor voltage buck converter (SC-VBC) with variable step-down controller (VSC) and switching frequency controller (SFC). The VSC and SFC change the step-down ratio and switching frequency of the SC-VBC in accordance with the input voltage and load current, respectively, enabling the converter to operate efficiently with a wide-ranging input voltage and load current. Measurements of a prototype chip demonstrated that our SC-VBC achieved a wide input voltage range and high efficiency of 1.3 – 2.6 V and 69%, respectively.IOP Publishing, Feb. 2023, Japanese Journal of Applied PhysicsScientific journal
- Abstract This paper proposes a fully-integrated switched-capacitor (SC) voltage boost converter (VBC) with a digital maximum power point tracking (MPPT) control circuit for low-voltage and low-power energy harvesting. The proposed digital MPPT control circuit converts analog voltage information of a PV cell into digital values and extracts the maximum power regardless of the harvester conditions and load current. Measurement results demonstrated that our proposed circuit can track the maximum power point of a PV cell successfully. The maximum voltage conversion ratio of our circuit was 5.6. The proposed power management system (PMS) generated a 2.58-V output voltage from a 0.46-V input voltage. The maximum power conversion efficiency was 63.6%.IOP Publishing, Jan. 2023, Japanese Journal of Applied Physics, 62(SC) (SC), SC1071 - SC1071Scientific journal
- Oct. 2022, The 24th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2022), 127 - 132, EnglishAn error diagnosis technique based on location variable simulation employing implicit representation of error location sets[Refereed]
- Oct. 2022, The 24th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2022), 115 - 120, EnglishOn technology remapping approach using multi-gate functionality of reconfigurable cells for post-mask ECO[Refereed]
- Sep. 2022, The 2022 International Conference on Solid State Devices and Materials (SSDM 2022), 798 - 799, EnglishFully integrated switched-capacitor buck converter with variable ratio and frequency controllers for ultra-low power LSI systems[Refereed]
- Last, Mar. 2022, 2020 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2020), 2AM1-2-1, EnglishParallel and cascaded connections of multi-scale convolutional neural networks for reconstruction-based anomaly detection[Refereed]
- Wiley, Nov. 2021, IEEJ Transactions on Electrical and Electronic Engineering, 16(11) (11), 1510 - 1517Scientific journal
- Mar. 2021, The 23rd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2021), 142 - 147, EnglishAdaptive ordering of EPI-groups to extract error location sets based on ZDD for error diagnosis[Refereed]
- Mar. 2021, The 23rd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2021), 98 - 103, EnglishSix-Valued Simulation Based on Adaptive Ordering of Input Patterns for Error Diagnosis[Refereed]
- Institute of Electronics, Information and Communications Engineers (IEICE), Mar. 2021, IEICE Electronics Express, 18(6) (6), 20210065 - 20210065Scientific journal
- Last, Mar. 2021, 2021 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 20201, 1AM2-2-3, EnglishSuper-resolution method for remote sensing images with adaptive selection of convolutional neural networks based on frequency analysis[Refereed]
- Institute of Electronics, Information and Communications Engineers (IEICE), Jan. 2021, IEICE Transactions on Information and Systems, E104.D(1) (1), 183 - 193Scientific journal
- Wiley, Jan. 2021, IEEJ Transactions on Electrical and Electronic Engineering, 16(1) (1), 161 - 163Scientific journal
- Abstract In the world today, we can always shoot digital videos with smartphones and share them with family or friends after editing them. It is necessary to check whether these videos have been tampered with to use them as forensic evidence in criminal investigations. This paper proposes a method for detecting tampered regions in a video where a specific subject is removed from a scene. In the proposed method, we use LSTM for the time domain analysis and UNet for the space domain analysis. The detection accuracy achieved 0.98 in terms of F‐measure, even though tampered the region was deformed or moved in the video. The experimental results show superior performance in the detection of tampered regions in digital videos.Wiley, Aug. 2020, Electronics and Communications in Japan, 103(10) (10), 15 - 25Scientific journal
- Improvement of Luminance Isotropy for Convolutional Neural Networks-Based Image Super-ResolutionConvolutional neural network (CNN)-based image super-resolutions are widely used as a high-quality image-enhancement technique. However, in general, they show little to no luminance isotropy. Thus, we propose two methods, "Luminance Inversion Training (LIT)" and "Luminance Inversion Averaging (LIA)," to improve the luminance isotropy of CNN-based image super-resolutions. Experimental results of 2× image magnification show that the average peak signal-to-noise ratio (PSNR) using Luminance Inversion Averaging is about 0.15-0.20dB higher than that for the conventional super-resolution.Institute of Electronics, Information and Communication Engineers(IEICE), Jul. 2020, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, 103(7) (7), 955 - 958, English
- IEEE, Jun. 2020, 2020 18th IEEE International New Circuits and Systems Conference (NEWCAS)International conference proceedings
- The Institute of Electrical Engineers of Japan, Jun. 2020, IEEJ Transactions on Electronics, Information and Systems, 140(6) (6), 638 - 650, Japanese
This paper proposes an image super-resolution using convolutional neural networks (CNNS) with multiple paths.
After SRCNN was proposed by C. Dong et al., CNN-based super resolutions are getting larger and deeper. They do not work quickly without accelerators such as GPU any more. For practical use, however, we need to design CNNs with less internal parameters and low computational costs for convolution operation.
The proposed CNN architecture consists of multiple paths with different depth. While a shallow path generates low frequency components, a deep path generates high frequency ones. Finally, they are synthesized at the last layer. This architecture can reduce the number of parameters relative to its performance.
Experimental results have shown that the average processing time for the proposed CNN was only 25% of the conventional MCH while keeping high image qualities.
- IEEE, Jun. 2020, 2020 18th IEEE International New Circuits and Systems Conference (NEWCAS)International conference proceedings
- This paper proposes an ultra-low power active diode (ADIO) using a hysteresis common gate comparator for low-voltage and low-power energy harvesting systems. The proposed ADIO consists of a MOS switch and hysteresis common gate comparator, which eliminates unwanted ripple and noise voltages. The hysteresis comparator controls the MOS switch to turn ON or OFF, depending on the input and output voltages. The hysteresis voltages of the comparator can be controlled by the current flowing in the comparator. The measurement results demonstrated that the hysteresis comparator had 26 and 25 mV hysteresis voltages and the ADIO using the hysteresis comparator eliminated unwanted ripple voltage. The maximum current consumption of our ADIO was 11.8 nA.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2020, IEICE ELECTRONICS EXPRESS, 17(11) (11), English[Refereed]Scientific journal
- Institute of Electrical Engineers of Japan (IEE Japan), Apr. 2020, IEEJ Transactions on Electronics, Information and Systems, 140(4) (4), 476 - 483, JapaneseScientific journal
- Last, Feb. 2020, 2020 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2020), 618 - 621, EnglishRotation invariant-digits recognition with single convolutional neural networks[Refereed]
- Last, Feb. 2020, 2020 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2020), 377 - 380, EnglishCNN-based Segmentationand Recognition of Traffic Signs with Parameter Regions[Refereed]
- © 2019 IEEE. This paper proposes an extremely-low-voltage CMOS driver circuit for multi-stage switched-capacitor (SC) voltage boost converter (VBC). The SC VBC using a conventional driver could not generate sufficient boosted clock signals when the input voltage becomes low. This is because the output voltages of the driver degrade significantly as the input voltage decreases. To mitigate the problem, we develop the low-voltage CMOS driver circuit to improve the low-voltage operation of the SC VBC. The proposed driver consists of a ring oscillator, non-overlap clock generator, and main driver (MD) circuits. Simulated results demonstrated that the proposed driver can generate sufficient amplitude of the clock signals and the SC VBC using the proposed driver generates a 600-mV output from a 100-mV input when the voltage conversion ratio of the VBC is set to 6. The peak efficiency was 48.9% at 120-nA load current. The driver circuit can operate at 79-mV input voltage.Nov. 2019, 2019 26th IEEE International Conference on Electronics, Circuits and Systems, ICECS 2019, 530 - 533, English[Refereed]International conference proceedings
- Oct. 2019, The 22nd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2019), 262 - 267, EnglishAn error diagnosis technique using ZDD to extract error location sets[Refereed]
- Oct. 2019, The 22nd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2019), 244 - 249, EnglishIncremental approaches for locating design errors: averaging epi-groups and generating additional input patterns[Refereed]
- Oct. 2019, The 22nd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2019), 158 - 163, EnglishA global placement method for RECON spare cells in ECO-friendly design style[Refereed]International conference proceedings
- Oct. 2019, The 22nd Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2019), 46 - 50, EnglishA 4ch CNN hardware architecture for image super-resolution[Refereed]International conference proceedings
- © 2018 IEEE. This paper proposes an ultra-low power active diode using a hysteresis common gate comparator for low-voltage and low-power energy harvesting systems. The proposed active diode consists of a MOS switch and hysteresis common gate comparator, which eliminates unwanted ripple and noise voltages. The hysteresis comparator controls the MOS switch to turn ON or OFF, depending on the input and output voltages. The hysteresis voltages of the comparator can be controlled by the current flowing in the comparator. Simulation results demonstrated that the hysteresis comparator has a -27 and 25 mV hysteresis voltages and the active diode using the hysteresis comparator eliminates unwanted ripple voltage.The Institute of Electrical and Electronics Engineers, Feb. 2019, IEEE/IFIP International Conference on VLSI and System-on-Chip, VLSI-SoC, 2018-October, 196 - 200, English[Refereed]International conference proceedings
- © 2018 IEEE. This paper presents an ultra-low-power switched-capacitor (SC) voltage buck converter (VBC) with step-down-ratio and clock-frequency controllers for ultra-low-power IoT devices. The proposed VBC consists of an n/8 SC VBC, step-down ratio controller, clock (CLK) generator, load current monitor, local VDD generator, and output voltage monitor. The step-down-ratio controller monitors an input voltage and then changes the step-down ratio n/8 of the SC VBC according to the input voltage (n=5,6,7,8). This enables the SC VBC wide input voltage operation. The CLK generator with the load current monitor changes an operating clock frequency in accordance with the load current to achieve highly efficient power conversion. Simulation results demonstrated that our proposed VBC converted 1.4-2.4 V input to 1.33-1.57 V output. The power dissipation at the steady state was 14.6 nW.The Institute of Electrical and Electronics Engineers, Jan. 2019, 2018 25th IEEE International Conference on Electronics Circuits and Systems, ICECS 2018, 209 - 212, English[Refereed]International conference proceedings
- © 2018 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. In this paper, we propose a fully integrated and area-efficient resistor-less relaxation oscillator (ROSC) for ultra-low power real-time clock (RTC) applications. The proposed ROSC is based on a conventional current-mode ROSC and is modified to be an area-efficient circuit configuration without using resistors. The proposed ROSC consists of a temperature-compensated bias current generator (BCG), proportional to absolute temperature (PTAT) voltage source, current-mode ROSC, shunt regulator, and output logic circuit. The BCG, PTAT voltage source, and shunt regulator are used to compensate for the temperature characteristics of the ROSC. The area of our proposed ROSC was extremely small, 0.022 mm2. Simulated results demonstrated that our proposed ROSC generates a 32.5 kHz clock frequency and achieves ultra-low power dissipation of 271 nW. The temperature and voltage dependence of the oscillation frequency were 138 ppm/°C and 13.9 ppm/mV, respectively. Monte Carlo statistical simulations showed that the mean, standard deviation, and coefficient of variation are 32.3, 0.6 kHz, and 1.9%, respectively. © 2018 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.Institute of Electrical Engineers of Japan, Nov. 2018, IEEJ Transactions on Electrical and Electronic Engineering, 13(11) (11), 1633 - 1641, English[Refereed]Scientific journal
- © 2018 The Japan Society of Applied Physics. In this paper, we present a wide-load-range switched-capacitor DC-DC buck converter with an adaptive bias comparator for ultra-low-power power management integrated circuit. The proposed converter is based on a conventional one and modified to operate in a wide load range by developing a load current monitor used in an adaptive bias comparator. Measurement results demonstrated that our proposed converter generates a 1.0V output voltage from a 3.0V input voltage at a load of up to 100 μA, which is 20 times higher than that of the conventional one. The power conversion efficiency was higher than 60% in the load range from 0.8 to 100 μA.The Japan Society of Applied Physics, Apr. 2018, Japanese Journal of Applied Physics, 57(4) (4), English[Refereed]International conference proceedings
- © 2018 IEEE. An analytical study of a multi-stage switched-capacitor (SC) voltage boost converter (VBC) for ultra-low voltage energy harvesting is presented. Because the output impedance of the VBC plays an important role in the VBC's performance, we developed an analytical model to achieve a highly efficient VBC. In our proposed method, we focus on currents flowing into input and output terminals of each stage and model the VBCs using switching frequency f, charge transfer capacitance Cf, and load capacitance CL. A comparison between simulated and calculated results showed that our model can estimate the output impedance of the VBC accurately. Our model is useful to compare the relative merits of different types of multi-stage SC VBCs.The Institute of Electrical and Electronics Engineers, Apr. 2018, Proceedings - IEEE International Symposium on Circuits and Systems, 2018-May, 1 - 5, English[Refereed]International conference proceedings
- This paper presents a fully integrated 32-MHz relaxation oscillator (ROSC) capable of sub-1-mu s start-up time operation for low-power intermittent VLSI systems. The proposed ROSC employs current mode architecture that is different from conventional voltage mode architecture. This enables compact and fast switching speed to be achieved. By designing transistor sizes equally between one in a bias circuit and another in a voltage to current converter, the effect of process variation can be minimized. A prototype chip in a 0.18-mu m CMOS demonstrated that the ROSC generates a stable clock frequency of 32.6 MHz within 1-mu s start-up time. Measured line regulation and temperature coefficient were +/- 0.69% and +/- 0.38%, respectively.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Mar. 2018, IEICE TRANSACTIONS ON ELECTRONICS, E101C(3) (3), 161 - 169, English[Refereed]Scientific journal
- © 2018 The Institute of Electronics, Information and Communication Engineers. This paper presents a fully integrated 32-MHz relaxation oscillator (ROSC) capable of sub-1-μs start-up time operation for lowpower intermittent VLSI systems. The proposed ROSC employs current mode architecture that is different from conventional voltage mode architecture. This enables compact and fast switching speed to be achieved. By designing transistor sizes equally between one in a bias circuit and another in a voltage to current converter, the effect of process variation can be minimized. A prototype chip in a 0.18-μm CMOS demonstrated that the ROSC generates a stable clock frequency of 32.6 MHz within 1-μs start-up time. Measured line regulation and temperature coefficient were ±0.69% and ±0.38%, respectively.The Institute of Electronics, Information and Communication Engineers, Mar. 2018, IEICE Transactions on Electronics, E101C(3) (3), 161 - 169, English[Refereed]Scientific journal
- SASIMI Workshop, Mar. 2018, Proceedings of the 21st workshop on synthesis and system integration of mixed information technologies, 81 - 86, EnglishAn error diagnosis technique based on unsatisfiable cores to extract error locations sets[Refereed]Scientific journal
- © 2017 IEEE. This paper proposes an ultra-low-power supercapacitor voltage monitoring system (VMS) for low-voltage energy harvesting. The proposed VMS consists of a voltage divider, control logic circuit, multiplexer (MUX), sample-and-hold circuit, nano-ampere current reference (IREF), and 4-bit successive approximation register analog to digital converter (SAR ADC). The proposed VMS monitors the supercapacitor voltage and converts it into digital codes. We employ power gating technique and a nano-ampere current reference circuit to achieve ultra-low power operation. Simulation results showed that our proposed VMS achieved the DNL/INL of 0.15/0.21LSB. Its ENOB was 3.83bit at 100 Hz and the average power dissipation was 58.0 nW.The Institute of Electrical and Electronics Engineers, Feb. 2018, ICECS 2017 - 24th IEEE International Conference on Electronics, Circuits and Systems, 2018-January, 498 - 501, English[Refereed]International conference proceedings
- © 2017 IEEE. This paper proposes a fully integrated voltage boost converter (VBC) for low-voltage energy harvesting. The proposed VBC consists of three stage charge pumps (CPs) with a low-leakage driver, ring oscillator, and 4-phase clock generator. The output voltage is four times higher than an input voltage Fin. The low-leakage driver generates control signals to operate CPs with low leakage current. The amplitude of the control signals is 2VIN and does not depend on the load current. The proposed VBC achieves a wide load current, high output voltage, and high efficiency, even with a low-voltage input of the harvester. Simulation results demonstrated that the proposed VBC converted 0.1-V input to 0.362-V output and 0.6-V input to 2.38-V output, when the load current is zero. The peak efficiency was 70.3% at a 0.6-V input and 1-mA load current.The Institute of Electrical and Electronics Engineers, Feb. 2018, ICECS 2017 - 24th IEEE International Conference on Electronics, Circuits and Systems, 2018-January, 502 - 505, English[Refereed]International conference proceedings
- Analytical Study of Multi-stage Switched-Capacitor Voltage Boost Converter for Ultra-low Voltage Energy HarvestingAn analytical study of a multi-stage switched-capacitor (SC) voltage boost converter (VBC) for ultra-low voltage energy harvesting is presented. Because the output impedance of the VBC plays an important role in the VBC's performance, we developed an analytical model to achieve a highly efficient VBC. In our proposed method, we focus on currents flowing into input and output terminals of each stage and model the VBCs using switching frequency f, charge transfer capacitance C-F, and load capacitance C-L. A comparison between simulated and calculated results showed that our model can estimate the output impedance of the VBC accurately. Our model is useful to compare the relative merits of different types of multi-stage SC VBCs.IEEE, 2018, 2018 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS), English[Refereed]International conference proceedings
- © 2018 The Institute of Electrical Engineers of Japan. This paper proposes an image super-resolution technique with convolutional neural networks using horizontal and vertical filters. In the proposed method, calculation costs become small because square filters at a hidden layer are replaced with horizontal and vertical bar filters. Experimental results have shown that the average processing time for the proposed architecture was only a half of the conventional one while keeping high image qualities.電気学会, 2018, IEEJ Transactions on Electronics, Information and Systems, 138(7) (7), 957 - 963, Japanese[Refereed]Scientific journal
- © 2017 IEEE. In this paper, we propose a fully integrated and area-efficient resistor-less relaxation oscillator (ROSC) for ultra-low power real-time clock (RTC) applications. The proposed ROSC is based on a conventional ROSC and modified to be area-efficient circuit configuration, without using resistors. The proposed ROSC consists of a bias current source, proportional to absolute temperature (PTAT) voltage source, current mode ROSC, shunt regulator, and output logic circuit. The PTAT voltage source and shut regulator are used to compensate for the temperature characteristics of the ROSC. By implementing our proposed ROSC in a 65-nm CMOS process, the area was 0.022 mm2. Simulated results demonstrated that our proposed ROSC generates 32.5-kHz clock frequency and achieves ultra-low power dissipation of 271 nW. The temperature and voltage dependences of the oscillation frequency were 138ppm/°C and 13.9ppm/mV, respectively. Monte Carlo statistical simulations showed that the mean, standard deviation, and the coefficient of variation are 32.3 kHz, 0.6 kHz, and 1.9%, respectively.The Institute of Electrical and Electronics Engineers, Sep. 2017, Proceedings - IEEE International Symposium on Circuits and Systems, 477 - 480, English[Refereed]International conference proceedings
- The Japan Society of Applied Physics, Sep. 2017, Extended abstract of the 2017 international conference on solid state devices and materials, 511 - 512, EnglishA wide load range switched capacitor DC-DC converter with adaptive bias comparator for ultra-low-power power management integrated circuit[Refereed]Scientific journal
- We present a low-power and low-energy level shifter (LS) circuit that can convert extremely low-voltage input into high-voltage output. The proposed LS consists of a pre-amplifier (pre-AMP) and an output latch. The pre-AMP employs a logic error correction circuit, which generates an operating current for the pre-AMP only when the logic levels of the input and output do not correspond. The pre-AMP generates complementary amplified signals, and the latch converts them into full-swing outputs. Measurement results demonstrated that the proposed LS fabricated in 0.18-mu m CMOS technology was able to convert an extremely low-voltage input of 80 mV into a high-voltage output of 1.8 V. The energy of the proposed LS was 0.35 pJ, when the low supply voltage, high supply voltage, and input pulse frequency were 0.4 V, 1.8 V, and 10 kHz, respectively. The static power dissipation without input was 0.12 nW.IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, Aug. 2017, IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 64(8) (8), 2026 - 2035, English[Refereed]Scientific journal
- © 2017 The Japan Society of Applied Physics. In this paper, we present a 151 nA quiescent and 6.8mA maximum-output-current low-dropout (LDO) linear regulator for micropower battery management. The LDO regulator employs self-biasing and multiple-stacked cascode techniques to achieve efficient, accurate, and high-voltageinput-tolerant operation. Measurement results demonstrated that the proposed LDO regulator operates with an ultralow quiescent current of 151 nA. The maximum output currents with a 4.16 V output were 1.0 and 6.8mA when the input voltages were 4.25 and 5.0 V, respectively.Apr. 2017, Japanese Journal of Applied Physics, 56(4) (4), 04CF11, English[Refereed]International conference proceedings
- Mar. 2017, Proceedings of the 2017 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2017), 1PM2 - 3-3, EnglishSegmentation and colorization of grayscale image using convolutional neural network[Refereed]International conference proceedings
- Mar. 2017, Proceedings of the 2017 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2017), 1AM2 - 1-4, EnglishRestoring defocus images with Wiener filter and convolutional neural network[Refereed]International conference proceedings
- Mar. 2017, Proceedings of the 2017 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2017), 3AM2 - 3-5, EnglishA study on point cloud registration with SIFT features[Refereed]International conference proceedings
- © 2017 The Institute of Electronics, Information and Communication Engineers. This paper proposes image super-resolution techniques with multi-channel convolutional neural networks. In the proposed method, output pixels are classified into K × K groups depending on their coordinates. Those groups are generated from separate channels of a convolutional neural network (CNN). Finally, they are synthesized into a K × K magnified image. This architecture can enlarge images directly without bicubic interpolation. Experimental results of 2×2, 3×3, and 4×4 magnifications have shown that the average PSNR for the proposed method is about 0.2 dB higher than that for the conventional SRCNN.Feb. 2017, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E100A(2) (2), 572 - 580, English[Refereed]Scientific journal
- This paper proposes image super-resolution techniques with multi-channel convolutional neural networks. In the proposed method, output pixels are classified into K x K groups depending on their coordinates. Those groups are generated from separate channels of a convolutional neural network (CNN). Finally, they are synthesized into a K x K magnified image. This architecture can enlarge images directly without bicubic interpolation. Experimental results of 2x2, 3x3, and 4x4 magnifications have shown that the average PS NR for the proposed method is about 0.2 dB higher than that for the conventional SRCNN.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Feb. 2017, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E100A(2) (2), 572 - 580, English[Refereed]Scientific journal
- Sub-1-mu s Start-up Time, 32-MHz Relaxation Oscillator for Low-Power Intermittent VLSI SystemsWe propose a sub-1-mu s start-up time, fully integrated 32-MHz relaxation oscillator (ROSC) for intermittent VLSI systems. Our proposed ROSC employs current mode architecture that is different from conventional voltage mode architecture. This enables compact and fast switching speed to be achieved. The measurement results demonstrated that the ROSC achieved sub-1-mu s start-up time and generated stable output frequency of 32.6 MHz. Measured line regulation, temperature coefficient, and variation coefficient in 10 samples were +/- 0.69, +/- 0.38, and 0.62%, respectively.IEEE, 2017, 2017 22ND ASIA AND SOUTH PACIFIC DESIGN AUTOMATION CONFERENCE (ASP-DAC), 35 - 36, English[Refereed]International conference proceedings
- In this paper, we present an impedance matching technique in magnetic-coupling-resonance wireless power transfer system for small implantable medical devices. By developing an equivalent circuit model of the WPT system, we show that impedance matching can be realized. Electromagnetic field simulations demonstrated that our proposed technique has capability of achieving maximum input power and available efficiency without using impedance matching circuits.IEEE, 2017, 2017 IEEE WIRELESS POWER TRANSFER CONFERENCE (WPTC 2017), 1 - 4, English[Refereed]International conference proceedings
- Copyright © 2016 The Institute of Electronics, Information and Communication Engineers. This paper presents a fully integrated voltage boost converter consisting of a charge pump (CP) and maximum power point tracking (MPPT) controller for ultra-low power energy harvesting. The converter is based on a conventional CP circuit and can deliver a wide range of load current by using nMOS and pMOS driver circuits for highly efficient charge transfer operation. The MPPT controller we propose dissipates nano-watt power to extract maximum power regardless of the harvester's power generation conditions and load current. The measurement results demonstrated that the circuit converted a 0.49-V input to a 1.46-V output with 73% power conversion efficiency when the output power was 348 μW. The circuit can operate at an extremely low input voltage of 0.21V.Dec. 2016, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E99A(12) (12), 2491 - 2499, English[Refereed]International conference proceedings
- This paper presents a fully integrated voltage boost converter consisting of a charge pump (CP) and maximum power point tracking (MPPT) controller for ultra-low power energy harvesting. The converter is based on a conventional CP circuit and can deliver a wide range of load current by using nMOS and pMOS driver circuits for highly efficient charge transfer operation. The MPPT controller we propose dissipates nano-watt power to extract maximum power regardless of the harvester's power generation conditions and load current. The measurement results demonstrated that the circuit converted a 0.49-V input to a 1.46-V output with 73% power conversion efficiency when the output power was 348 mu W. The circuit can operate at an extremely low input voltage of 0.21V.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Dec. 2016, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E99A(12) (12), 2491 - 2499, English[Refereed]Scientific journal
- Oct. 2016, Proceedings of the 20th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2016), 205 - 210, EnglishOn component ratio of RECON spare cells for ECO-friendly design style[Refereed]International conference proceedings
- This paper proposes a fully-integrated high-conversion-ratio dual-output voltage boost converter (VBC) with maximum power point tracking (MPPT) circuits for low-voltage energy harvesting. The VBC consists of two voltage generators that generate V-OUT1 and V-OUT2. V-OUT1 and V-OUT2 are three and nine times higher than the harvester's output V-IN, respectively. V-OUT1 is used as a supply voltage for on-chip application circuits while V-OUT2 is used as the charging voltage for a Li-ion secondary battery. The VBC achieves a high voltage conversion ratio (max. x 9) and a high power conversion efficiency. The MPPT circuits control the operating frequencies of the CPs to extract maximum power at each output. The measurement results demonstrated that the circuit converted a 0.59 V input to a 1.41 V output with 75.8% efficiency when the output powers of V-OUT1 and V-OUT2 were 396 and 0 mu W, respectively, and a 0.62 V input to a 4.54 V output with 49.1% efficiency when the output powers were 0 and 114 mu W, respectively.IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, Oct. 2016, IEEE JOURNAL OF SOLID-STATE CIRCUITS, 51(10) (10), 2398 - 2407, English[Refereed]Scientific journal
- Oct. 2016, Proceedings of the 20th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2016), 317 - 322, EnglishAn error diagnosis technique based on averaged EPI values to extract error locations sets[Refereed]International conference proceedings
- Oct. 2016, Proceedings of the 20th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2016), 268 - 273, EnglishA hardware architecture to perform K-means clustering for learning-based super-resolution combining self-learning and prior-learning dictionaries[Refereed]International conference proceedings
- Sep. 2016, Extended abstract of the 2016 International Conference on Solid State Devices and Materials (SSDM 2016), 463 - 464, EnglishA self-biased low-dropout linear regulator for ultra-low power battery management[Refereed]Research society
- Sep. 2016, 第15回情報科学技術フォーラム(FIT2016)講演論文集, RI - 005, Japanese4出力の畳み込みニューラルネットワークを用いた超解像[Refereed]Symposium
- [電子情報通信学会], May 2016, 第29回 回路とシステムワークショップ論文集, 29, 301 - 306, Japanese極低入力電圧を昇圧するチャージポンプ回路の設計[Refereed]Symposium
- May 2016, 電子情報通信学会論文誌, J99-D(5) (5), 588 - 593, Japanese4並列の畳み込みニューラルネットワークを用いた超解像[Refereed]Scientific journal
- This paper proposes an effective noise reduction approach for retinal tomography. Tomographic images include many speckle and impulse noises. The conventional approach removes them by averaging ten or more continuous shots in a second. However, the averaging often causes a blur or disappearance of the diseased part because patient's eyeball moves in three dimensions during the continuous shooting. This paper proposes a new approach based on locally weighted averaging to reduce noise while being diagnosed. Results of the comparative experiments have shown that the proposed approach can hold the feature of the diagnosis part, while the conventional approach loses it.Research Institute of Signal Processing, Japan, Apr. 2016, Journal of Signal Processing, 20(4) (4), 217 - 220, English[Refereed]Scientific journal
- Research institute of signal processing japan, Mar. 2016, RISP international workshop on nonlinear circuits, 570 - 573, EnglishThree dimensional NL-Means method for denoising continuous shooting photography[Refereed]International conference proceedings
- Research institute of signal processing japan, Mar. 2016, RISP international workshop on nonlinear circuits, 566 - 569, EnglishNoise reduction for medical tomographic images based on locally weighted averaging[Refereed]International conference proceedings
- Research institute of signal processing japan, Mar. 2016, RISP international workshop on nonlinear circuits, 423 - 426, EnglishCrack extraction from noisy images with fractal dimension analysis[Refereed]International conference proceedings
- Research institute of signal processing japan, Mar. 2016, RISP international workshop on nonlinear circuits, 419 - 422, EnglishAnomalous behavior detection in videos based on deformable part models[Refereed]International conference proceedings
- In this paper, we present a fully on-chip switched-capacitor DC–DC converter for low-voltage CMOS LSIs. The converter has three terminals of input, ground, and output, by developing control circuits with fully on-chip configuration. We employ an ultra low-power nanoampere bias current and voltage reference circuit to achieve ultra low-power dissipation of control circuits. It enables us to realize a highly efficient power conversion circuit at light-load-current applications. The converter achieves highly efficient and robust voltage conversion using a pulse frequency modulation control circuit and a start-up/fail-safe circuit. Measurement results demonstrated that the converter can convert a 3.0 V input into 1.2 V output successfully. The start-up and fail-safe operations were confirmed through the measurement. The efficiency was more than 50% in the range of 2–6 µA load current.The japan society of applied physics, Mar. 2016, Japanese journal of applied phisycs, 55(4s) (4s), 04EF09 - 1-04EF09-5, English[Refereed]Scientific journal
- Image Super-Resolution with Multi-Channel Convolutional Neural NetworksThis paper proposes image super-resolution techniques with multi-channel convolutional neural networks (CNN). In the proposed method, output pixels are classified into four groups depending on their positions. Those groups are generated from separate channels of the CNN. Finally, they are synthesized into a 2x2 magnified image. This architecture can enlarge images directly without bicubic interpolation. Experimental results have shown that the average PSNR for the proposed method achieves 36.88 dB, which is 0.39 dB higher than that for the conventional SRCNN.IEEE, 2016, 2016 14TH IEEE INTERNATIONAL NEW CIRCUITS AND SYSTEMS CONFERENCE (NEWCAS), 1 - 4, English[Refereed]International conference proceedings
- A Fully Integrated, 1-mu s Start-up Time, 32-MHz Relaxation Oscillator for Low-Power Intermittent SystemsThis paper proposes a fully integrated 32-MHz relaxation oscillator (ROSC) capable of fast start-up time operation for low-power intermittent VLSI systems. The proposed ROSC employs current mode architecture that is different from conventional voltage mode architecture. This enables compact and fast switching speed to be achieved. By designing transistor sizes equally between one in a bias circuit and another in a voltage to current converter, the effect of process variation can be minimized. A prototype chip in a 0.18-mu m CMOS demonstrated that the ROSC generates a stable clock frequency of 32.6 MHz within 1-mu s start-up time. Measured line regulation and temperature coefficient were +/-0.69% and +/-0.38%, respectively.IEEE, 2016, 2016 14TH IEEE INTERNATIONAL NEW CIRCUITS AND SYSTEMS CONFERENCE (NEWCAS), 1 - 4, English[Refereed]International conference proceedings
- A 1.66-nW/kHz, 32.7-kHz, 99.5ppm/degrees C Fully Integrated Current-Mode RC Oscillator for Real-Time Clock Applications with PVT StabilityA compact and low-power current-mode RC oscillator (RCO) with process, voltage, and temperature (PVT) stability has been developed. The circuit employs a current-mode RCO architecture without using a conventional comparator based voltage-mode architecture. The current-mode architecture enables a compact RCO and faster switching speed to be achieved. By designing transistor sizes equally between one in a bias circuit and another in a voltage to current converter, the effect of process variation can be minimized. A prototype chip in a 0.18-mu m CMOS process demonstrated that the RCO generates a stable clock frequency of 32.7 kHz with a small area of 0.19 mm 2 and low-power dissipation of 54.2 nW at 0.85-V power supply, which achieves a figure of merit (FoM) of 1.66 nW/kHz. The measured temperature coefficient and line regulation were 99.5ppm/degrees C and 8.9ppm/mV, respectively.IEEE, 2016, ESSCIRC CONFERENCE 2016, 149 - 152, English[Refereed]International conference proceedings
- Highly-Efficient Power Transmitter Coil Design for Small Wireless Sensor NodesWe present a power transmitter coil design for millimeter-size small wireless sensor nodes to improve coupling coefficient. We also develop a wireless power transfer (WPT) system using resonant coupling to achieve higher power transfer efficiency. Simulation results demonstrated that the power transfer efficiency was 60% at z-gap = 10 mm. Compared with conventional system, coupling coefficient was improved about 2.5 times higher and the power transfer efficiency was improved by 3% when z-gap = 10 mm.IEEE, 2016, 2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 512 - 513, English[Refereed]International conference proceedings
- Analytical Study of Rectifier Circuit for Wireless Power Transfer SystemsIn this paper, we develop an analytical model of a rectifier circuit that is used in wireless power transfer (WPT) systems, considering the switching timing, ON/OFF resistance, and load characteristics of the rectifier. The model enables us to estimate the performance of the rectifier and optimum load resistance that maximizes the output power and the power efficiency. The model can be extended into Y parameter, which is useful when we consider to develop multi-stage rectifier circuit. By comparing the derived model with the circuit simulation, we confirmed that the performance of the rectifier can be estimated with high accuracy.IEEE, 2016, 2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 338 - 339, English[Refereed]International conference proceedings
- A 0.38-mu W Stand-by Power, 50-nA-to-1-mA Load Current Range DC-DC Converter with Self-Biased Linear Regulator for Ultra-Low Power Battery ManagementThis paper proposes a DC-DC converter for ultra low power battery management. The proposed circuit consists of a switched capacitor converter (SCC) and self-biased linear regulator (SBLR). The SBLR monitors an output load current and controls the switching frequency of the SCC to achieve both ultra-low stand-by power and wide load current capability. Measurement results demonstrated that the converter successfully converts a 4.2-V input into a 0.98-V output. The stand-by power was extremely low, 0.38 mu W. The load current range where the power conversion efficiency was higher than 50% was from 2 mu A to 1 mA. The efficiency was 54% when the input voltage and output power were 4.0 V and 0.97 mW, respectively.IEEE, 2016, 2016 IEEE ASIAN SOLID-STATE CIRCUITS CONFERENCE (A-SSCC), 225 - 228, English[Refereed]International conference proceedings
- This paper proposes a fully integrated 32-MHz relaxation oscillator (ROSC) capable of fast start-up time operation for low-power intermittent VLSI systems. The proposed ROSC employs current mode architecture that is different from conventional voltage mode architecture. This enables compact and fast switching speed to be achieved. By designing transistor sizes equally between one in a bias circuit and another in a voltage to current converter, the effect of process variation can be minimized. A prototype chip in a 0.18-mu m CMOS demonstrated that the ROSC generates a stable clock frequency of 32.6 MHz within 1-mu s start-up time. Measured line regulation and temperature coefficient were +/-0.69% and +/-0.38%, respectively.IEEE, 2016, 2016 14TH IEEE INTERNATIONAL NEW CIRCUITS AND SYSTEMS CONFERENCE (NEWCAS), 101-C(3) (3), 161 - 169, English[Refereed]International conference proceedings
- In this paper, we propose a low-power circuit-shared static flip-flop ((CSFF)-F-2) for extremely low power digital VLSIs. The (CSFF)-F-2 consists of five static NORs and two inverters (INVs). The (CSFF)-F-2 utilizes a positive edge of a buffered clock signal, which is generated from a root clock, to take data into a master latch and a negative edge of the root clock to hold the data in a slave latch. The total number of transistors is only 24, which is the same as the conventional transmission-gate flip flop (TGFF) used in the most standard cell libraries. SPICE simulations in 0.18-mu m standard CMOS process demonstrated that our proposed (CSFF)-F-2 achieved clock-to-Q delay of 18.3 ns, setup time of 10.0 ns, hold time of 5.5 ns, and power dissipation of 9.7nW at 1-MHz clock frequency and 0.5-V power supply. The physical design area increased by 16% and power dissipation was reduced by 13% compared with those of conventional TGFF. Measurement results demonstrated that our proposed (CSFF)-F-2 can operate at 0.352V with extremely low energy of 5.93 fJ.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Dec. 2015, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E98A(12) (12), 2600 - 2606, English[Refereed]Scientific journal
- Copyright © 2015 The Institute of Electronics, Information and Communication Engineers. In this paper, we propose a low-power circuit-shared static flip-flop (CS2FF) for extremely low power digital VLSIs. The CS2FF consists of five static NORs and two inverters (INVs). The CS2FF utilizes a positive edge of a buffered clock signal, which is generated from a root clock, to take data into a master latch and a negative edge of the root clock to hold the data in a slave latch. The total number of transistors is only 24, which is the same as the conventional transmission-gate flip flop (TGFF) used in the most standard cell libraries. SPICE simulations in 0.18-μm standard CMOS process demonstrated that our proposed CS2FF achieved clock-to-Q delay of 18.3 ns, setup time of 10.0 ns, hold time of 5.5 ns, and power dissipation of 9.7nW at 1-MHz clock frequency and 0.5-V power supply. The physical design area increased by 16% and power dissipation was reduced by 13% compared with those of conventional TGFF. Measurement results demonstrated that our proposed CS2FF can operate at 0.352V with extremely low energy of 5.93 fJ.The institute of electronics, information and communication engineers (IEEE), Dec. 2015, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E98A(12) (12), 2600 - 2606, English[Refereed]Scientific journal
- The japan society of applied physics, Sep. 2015, Extended abstract of the 2015 international conference on solid state devices and materials, 154 - 155, EnglishA wireless power transfer system for small-sized sensor applications[Refereed]International conference proceedings
- The japan society of applied physics, Sep. 2015, Extended abstract of the 2015 international conference on solid state devices and materials, 158 - 159, EnglishA fully on-chip 3-terminal switched-capacitor DC-DC converter with startup/fail-safe circuit[Refereed]International conference proceedings
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 28, 94 - 99, Japanese適応バイアス技術を用いた超低電力・高速オペアンプの高性能化[Refereed]Symposium
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 258 - 263, Japanese小型センサデバイスに向けた無線給電システムの設計[Refereed]Symposium
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 28, 264 - 269, Japanese高耐圧CMOSプロセスによる超低電力・適応バイアス型シリーズレギュレータ[Refereed]Symposium
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 28, 70 - 75, Japanese高速起動を特徴とするフルオンチップ32 MHz弛張発振回路[Refereed]Symposium
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 28, 270 - 275, Japaneseスイッチトキャパシタ回路を用いたオンチップ電源回路の高効率化[Refereed]Symposium
- 電子情報通信学会, Aug. 2015, 第28回 回路とシステムワークショップ, 28, 88 - 93, Japaneseサブスレッショルド領域動作に適したスタンダードセルのサイジング手法[Refereed]Symposium
- © 2015 IEEE. In this paper, we propose a low-power level shifter (LS) capable of converting extremely low-input voltage into highoutput voltage. The proposed LS consists of a pre-amplifier with a logic error correction circuit and an output latch stage. The pre-amplifier generates complementary amplified signals, and the latch stage converts them into full-swing output signals. Simulated results demonstrated that the proposed LS in a 0.18-μm CMOS process can convert a 0.19-V input into 1.8-V output correctly. The energy and the delay time of the proposed LS were 0.24 pJ and 21.4 ns when the low supply voltage, high supply voltage, and the input pulse frequency, were 0.4, 1.8 V, and 100 kHz, respectively.Jul. 2015, Proceedings - IEEE International Symposium on Circuits and Systems, 2015-July, 2948 - 2951[Refereed]International conference proceedings
- This paper proposes an ultra-low power fully on-chip CMOS relaxation oscillator (ROSC) for a real-time clock application. The proposed ROSC employs a compensation circuit of a comparator's non-idealities caused by offset voltage and delay time. The ROSC can generate a stable, and 32-kHz oscillation clock frequency without increasing power dissipation by using a low reference voltage and employing a novel compensation architecture for comparators. Measurement results in a 0.18-mu m CMOS process demonstrated that the circuit can generate a stable clock frequency of 32.55 kHz with low power dissipation of 472nW at 1.8-V power supply. Measured line regulation and temperature coefficient were 1.1%/V and 120 ppm/degrees C, respectively.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, May 2015, IEICE TRANSACTIONS ON ELECTRONICS, E98C(5) (5), 446 - 453, English[Refereed]Scientific journal
- Copyright © 2015 The Institute of Electronics, Information and Communication Engineers. This paper proposes an ultra-low power fully on-chip CMOS relaxation oscillator (ROSC) for a real-time clock application. The proposed ROSC employs a compensation circuit of a comparator's non-idealities caused by offset voltage and delay time. The ROSC can generate a stable, and 32-kHz oscillation clock frequency without increasing power dissipation by using a low reference voltage and employing a novel compensation architecture for comparators. Measurement results in a 0.18-μm CMOS process demonstrated that the circuit can generate a stable clock frequency of 32.55 kHz with low power dissipation of 472 nW at 1.8-V power supply. Measured line regulation and temperature coefficient were 1.1%/V and 120 ppm/°C, respectively.The institute of electronics, information and communication engineers (IEEE), May 2015, IEICE Transactions on Electronics, E98C(5) (5), 446 - 453, English[Refereed]Scientific journal
- © 2015 The Japan Society of Applied Physics. In this paper, we present a rail-to-rail folded-cascode amplifier (AMP) with adaptive biasing circuits (ABCs). The circuit uses a nano ampere current reference circuit to achieve ultralow-power and ABCs to achieve high-speed operation. The ABCs are based on conventional circuits and modified to be suitable for rail-to-rail operation. The measurement results demonstrated that the AMP with the proposed ABCs can operate with an ultralowpower of 384 nA when the input voltage was 0.9V and achieve high speeds of 0.162V/μs at the rise time and 0.233V/μs at the fall time when the input pulse frequency and the amplitude were 10 kHz and 1.5 Vpp, respectively.The Japan Society of Applied Physics (JSAP), Apr. 2015, Japanese Journal of Applied Physics, 54(4) (4), 1 - 7, English[Refereed]International conference proceedings
- © 2015 IEEE. We propose a fully integrated 3-terminal voltage converter with a maximum power point tracking (MPPT) circuit for ultra-low voltage energy harvesting. The MPPT circuit dissipates nano-watt power to extract maximum output power. The measurement results demonstrated that the circuit converted a 0.49-V input to a 1.46-V output with 73.6% power conversion efficiency when the output power was 348 μW. The circuit can operate at an extremely low input voltage of 0.21 V.The Institute of Electrical and Electronics Engineers (IEEE), Mar. 2015, 20th Asia and South Pacific Design Automation Conference, ASP-DAC 2015, 30 - 31, English[Refereed]International conference proceedings
- Research Institute of Signal Processing Japan (RISP), Mar. 2015, Proceedings of 2015 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2015), 218 - 221, EnglishObject Detection with Deformable Part Models and Deep Convolutional Neural Networks[Refereed]International conference proceedings
- Research Institute of Signal Processing Japan (RISP), Mar. 2015, Proceedings of 2015 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2015), 421 - 424, EnglishBayer Demosaicing with Example-Based Super-Resolution[Refereed]International conference proceedings
- Research Institute of Signal Processing Japan (RISP), Mar. 2015, Proceedings of 2015 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2015), 353 - 356, EnglishArchitecture of a JPEG Noise Reduction Method with Total Variation[Refereed]International conference proceedings
- Mar. 2015, Proceedings of the 19th Workshop on Synthesis And System Integration of Mixed Information Technologies (SASIMI 2015), 319 - 324, EnglishAn ECO-friendly design style based on reconfigurable cells[Refereed]International conference proceedings
- © IEICE 2015. In this paper, we present an ultra-low voltage Advanced Encryption Standard (AES) SubBytes transformation (S-BOX) circuit. The S-BOX is widely used as a basic cryptographic primitive for the secure transaction in wireless sensor networks. We employ an asynchronous circuit design technique for low-voltage operations to achieve ultra-low power dissipation. In the proposed approach, we apply a quasi-delay-insensitive (QDI) design methodology to the asynchronous S-BOX circuit to reduce the spurious transitions in combinational logics and to increase robustness against PVT variations. Measurement results in 0.18-µm CMOS process demonstrated that our asynchronous S-BOX circuit consumes only 0.99-pJ at 330-mV, which is 12% less energy than that of synchronous one. QDI asynchronous circuits in the datapath are an effective solution in the near-threshold and sub-threshold regimes.The Institute of Electronics, Information and Communication Engineers (IEICE), Jan. 2015, IEICE Electronics Express, 12(4) (4), 1 - 10, English[Refereed]Scientific journal
- A 0.19-V Minimum Input Low Energy Level Shifter for Extremely Low-Voltage VLSIsIn this paper, we propose a low-power level shifter (LS) capable of converting extremely low-input voltage into high-output voltage. The proposed LS consists of a pre-amplifier with a logic error correction circuit and an output latch stage. The pre-amplifier generates complementary amplified signals, and the latch stage converts them into full-swing output signals. Simulated results demonstrated that the proposed LS in a 0.18-mu m CMOS process can convert a 0.19-V input into 1.8-V output correctly. The energy and the delay time of the proposed LS were 0.24 pJ and 21.4 ns when the low supply voltage, high supply voltage, and the input pulse frequency, were 0.4, 1.8 V, and 100 kHz, respectively.IEEE, 2015, 2015 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS), 2948 - 2951, English[Refereed]International conference proceedings
- A Fully-Integrated, High-Conversion-Ratio and Dual-Output Voltage Boost Converter with MPPT for Low-Voltage Energy HarvestingThis paper proposes a fully-integrated high-conversion-ratio dual-output voltage boost converter (VBC) with maximum power point tracking (MPPT) circuits for low-voltage energy harvesting. The VBC consists of two voltage generators that generate V-OUT1 and V-OUT2. V-OUT1 and V-OUT2 are three and nine times higher than the harvester's output V-IN, respectively. V-OUT1 is used as a supply voltage for on-chip application circuits while V-OUT2 is used as the charging voltage for a Li-ion battery. The VBC achieves a high voltage conversion ratio (max. x 9) and a high power conversion efficiency with a small number of charge pumps (CPs). The MPPT circuits control the operating frequencies of the CPs to extract maximum power at each output. The measurement results demonstrated that the circuit converted a 0.59-V input to a 1.41-V output with 75.8% efficiency when the output powers of V-OUT1 and V-OUT2 were 396 and 0 mu W, respectively, and a 0.62-V input to a 4.54-V output with 49.1% efficiency when the output powers were 0 and 114 mu W, respectively.IEEE, 2015, 2015 IEEE ASIAN SOLID-STATE CIRCUITS CONFERENCE (A-SSCC), 297 - 300, English[Refereed]International conference proceedings
- 情報処理学会, Sep. 2014, 情報処理学会 第13回情報科学技術フォーラム(FIT2014), 173 - 174, Japanese学習型超解像による4倍拡大映像出力ハードウェアの実現と辞書探索回路の規模削減Symposium
- The Japan Society of Applied Physics (JSAP), Sep. 2014, Extended abstract of the 2014 International Conference on Solid State Devices and Materials (SSDM 2014), 964 - 965, EnglishA Nano-Watt Power Rail-to-Rail CMOS Amplifier with Adaptive Biasing for Ultra-Low Power Analog LSIs[Refereed]Research society
- 電子情報通信学会, Aug. 2014, 第27 回 回路とシステムワークショップ, 27, 25 - 30, Japanese電力変換効率の負荷電流依存性を考慮したオンチップチャージポンプの高効率化[Refereed]Symposium
- 電子情報通信学会, Aug. 2014, 電子情報通信学会 集積回路研究会, 99 - 104, Japanese時間計測アプリケーシ ョンに向けた超低電力弛張発振回路Symposium
- 電子情報通信学会, Aug. 2014, 第27 回 回路とシステムワークショップ, 31 - 35, Japanese高耐圧CMOSトランジスタによる低電力バンドギャップリファレンス回路[Refereed]Symposium
- 電子情報通信学会, Aug. 2014, 第27 回 回路とシステムワークショップ, 300 - 305, JapanesePWM制御方式を用いた時間分解能型ADコンバータの低電力化[Refereed]Symposium
- A fully on-chip CMOS relaxation oscillator (ROSC) with a PVT variation compensation circuit is proposed in this paper. The circuit is based on a conventional ROSC and has a distinctive feature in the compensation circuit that compensates for comparator's non-idealities caused by not only offset voltage, but also delay time. Measurement results demonstrated that the circuit can generate a stable clock frequency of 6.66 kHz. The current dissipation was 320 nA at 1.0-V power supply. The measured line regulation and temperature coefficient were 0.98%/V and 56 ppm/ °C, respectively. Copyright © 2014 The Institute of Electronics, Information and Communication Engineers.The Institute of Electronics, Information and Communication Engineers (IEICE), Jun. 2014, IEICE Transactions on Electronics, E97-C(6) (6), 512 - 518, English[Refereed]Scientific journal
- A fully on-chip CMOS relaxation oscillator (ROSC) with a PVT variation compensation circuit is proposed in this paper. The circuit is based on a conventional ROSC and has a distinctive feature in the compensation circuit that compensates for comparator's non-idealities caused by not only offset voltage, but also delay time. Measurement results demonstrated that the circuit can generate a stable clock frequency of 6.66 kHz. The current dissipation was 320 nA at 1.0-V power supply. The measured line regulation and temperature coefficient were 0.98%/V and 56 ppm/degrees C, respectively.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2014, IEICE TRANSACTIONS ON ELECTRONICS, E97C(6) (6), 512 - 518, English[Refereed]Scientific journal
- RISP, Mar. 2014, 2014 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2014), 41 - 44, EnglishScene Segmentation for TV Programs Based on a Bag-of-VisualWords Model[Refereed]International conference proceedings
- RISP, Mar. 2014, 2014 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2014), 501 - 504, EnglishEstimation of Visual Importance Map for Image Quality Assessment[Refereed]International conference proceedings
- RISP, Mar. 2014, 2014 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2014), 361 - 364, EnglishA Scene Matching Method for TV Programs Based on Audio Features[Refereed]International conference proceedings
- RISP, Mar. 2014, 2014 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2014), 301 - 304, EnglishArchitecture of Digital Zooming Function with Example-Based Hierarchical Super-Resolution[Refereed]International conference proceedings
- A 24-Transistor Static Flip-Flop Consisting of NORs and Inverters for Low-Power Digital VLSIsIn this paper, we propose a low-power circuit-shared static flip-flop (CS2 FF) for extremely low power digital VLSIs. The CS2 FF consists of five static NORs and two inverters (INVs). The CS2 FF utilizes a positive edge of a buffered clock signal, which is generated from a root clock, to take data into a master latch and a negative edge of the root clock to hold the data in a slave latch. The total number of transistors is only 24, which is the same as the conventional tri-state buffer based flip flop (TBFF) used in the most standard cell libraries. SPICE simulations in 0.18-mu m standard CMOS process demonstrated that our proposed (CSFF)-F-2 achieved clock-to-Q delay of 17.4 ns, setup time of 5.91 ns, hold time of 1.17 ns, and power dissipation of 15.4 nW at 1-MHz clock frequency and 0.5-V power supply. The physical design area increased by 21% and power dissipation was reduced by 26% compared with those of conventional TBFF. Our proposed CS2 FF can operate at 0.347 V with extremely low power of 6.61 nW, 33% less than that of TBFF.IEEE, 2014, 2014 IEEE 12TH INTERNATIONAL NEW CIRCUITS AND SYSTEMS CONFERENCE (NEWCAS), 137 - 140, English[Refereed]International conference proceedings
- A 0.21-V Minimum Input, 73.6% Maximum Efficiency, Fully Integrated Voltage Boost Converter with MPPT for Low-Voltage Energy HarvestersThis paper proposes a fully integrated voltage boost converter with a maximum power point tracking (MPPT) circuit for ultra-low power energy harvesting. The converter is based on a conventional charge pump circuit and can deliver a wide range of load current by using nMOS and pMOS driver circuits for highly efficient switching operation. The MPPT circuit we propose dissipates nano-watt power to extract maximum power regardless of the harvester's power generation conditions and load current. The measurement results demonstrated that the circuit converted a 0.49-V input to a 1.46-V output with 73.6% power conversion efficiency when the output power was 348 mu W. The circuit can operate at an extremely low input of 0.21 V.IEEE, 2014, PROCEEDINGS OF THE 40TH EUROPEAN SOLID-STATE CIRCUIT CONFERENCE (ESSCIRC 2014), 255 - 258, English[Refereed]International conference proceedings
- Oct. 2013, 18th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2013), 253 - 258, EnglishTechnology remapping based on multiple solutions for post-mask functional ECO[Refereed]International conference proceedings
- Oct. 2013, 18th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2013), 170 - 175, EnglishA technique for accelerating adaptive super resolution technique based on local features of images using GPU[Refereed]International conference proceedings
- Oct. 2013, 18th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2013), 28 - 33, EnglishAn error diagnosis technique using QBF solver to fix LUT functions[Refereed]International conference proceedings
- Oct. 2013, 18th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2013), 360 - 365, EnglishA memory-saving technique for 4K super-resolution circuit with binary tree dictionary[Refereed]International conference proceedings
- Oct. 2013, 18th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2013), 118 - 122, EnglishA compact and energy-efficient Muller C-element for low-voltage asynchronous CMOS digital circuits[Refereed]International conference proceedings
- RISP, Mar. 2013, Proceedings of 2013 RISP International Workshop on Nonlinear Circuits, Communications and Signal Processing (NCSP 2013), 373 - 376, EnglishHighlight Generation Technique for Baseball Games Based on Information Entropies[Refereed]International conference proceedings
- 学習型超解像のための二分木辞書学習型超解像の辞書を二分木構造化する手法を提案する.本論文では,辞書内の事例探索アルゴリズムに二分木探索を用いることで,高速処理と高画質化を実現した.実験の結果,従来の探索時間のオーダをO(N)からO(2log_2N)に高速化し,PSNRを約0.6dB改善できることを確認した.電子情報通信学会, Feb. 2013, 電子情報通信学会論文誌, J96-D(2) (2), 357 - 361, Japanese[Refereed]Scientific journal
- This paper presents bandgap reference (BGR) and sub-BGR circuits for nanowatt LSIs. The circuits consist of a nano-ampere current reference circuit, a bipolar transistor, and proportional-to-absolute-temperature (PTAT) voltage generators. The proposed circuits avoid the use of resistors and contain only MOSFETs and one bipolar transistor. Because the sub-BGR circuit divides the output voltage of the bipolar transistor without resistors, it can operate at a sub-1-V supply. The experimental results obtained in the 0.18-μm CMOS process demonstrated that the BGR circuit could generate a reference voltage of 1.09 V and the sub-BGR circuit could generate one of 0.548 V. The power dissipations of the BGR and sub-BGR circuits corresponded to 100 and 52.5 nW. © 1966-2012 IEEE.IEEE, 2013, IEEE Journal of Solid-State Circuits, 48(6) (6), 1530 - 1538, English[Refereed]Scientific journal
- This paper proposes an ultra-low power fully on-chip CMOS relaxation oscillator (ROSC) for a real-time clock application. The circuit has a distinctive feature in compensation architecture of a comparator's non-idealities caused by offset voltage and delay time. The ROSC can generate a stable and higher oscillation clock frequency without increasing power by using a low reference voltage and employing a novel compensation architecture for comparators. Measurement results in a 0.18-μm CMOS process demonstrated that the circuit can generate a stable clock frequency of 32.55 kHz. The power dissipation was 472 nW. Measured line regulation and temperature coefficient were 1.1%/V and 120ppm/°C, respectively. © 2013 IEEE.2013, European Solid-State Circuits Conference, 315 - 318, English[Refereed]International conference proceedings
- JSAP, Sep. 2012, Extended abstract of the 2012 International Conference on Solid State Devices and Materials, 154 - 155, EnglishA dynamic comparator using dynamic currents of CMOS logic gates for low-power and high-efficient offset calibration[Refereed]International conference proceedings
- This paper presents a level shifter circuit capable of handling extremely low-voltage inputs. The circuit has a distinctive current generation scheme using a logic error correction circuit that works by detecting the input and output logic levels. The proposed level shifter circuit can convert low-voltage digital input signals into high-voltage digital output signals. The circuit achieves low-power operation because it dissipates operating current only when the input signal changes. Measurement results demonstrated that the circuit can convert a 0.23-V input signal into a 3-V output signal. The power dissipation was 58 nW for a 0.4-V 10-kHz input pulse.IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, Jul. 2012, IEEE JOURNAL OF SOLID-STATE CIRCUITS, 47(7) (7), 1776 - 1783, English[Refereed]Scientific journal
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 192-196, EnglishSaving power consumption in final stage adder of multiplier by using difference in arrival times with input signals[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 534-538, EnglishReduction of glitches for low-power multipliers using 4-2 compressors based on hybrid-CMOS logic style[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 199-204, EnglishReconfigurable cells for post-mask ECO[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 492-496, EnglishHardware architecture for real-time operation of learning-based super-resolution using binary search tree[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 28-32, EnglishA technique for accelerating SVM-based image recognition using GPU[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 544-548, EnglishAn error diagnosis technique based on SAT solver[Refereed]International conference proceedings
- Mar. 2012, The 17th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2012), pp. 555-559, EnglishA delay control technique for low-voltage subthreshold CMOS digital circuits[Refereed]International conference proceedings
- Feb. 2012, 神戸大学大学院工学研究科紀要, 第3号, pp. 32-39, Japaneseカラー画像に対応した画質評価手法VSNRC[Refereed]Scientific journal
- This paper presents an ultra-low power CMOS amplifier (AMP) using a simple and novel adaptive biasing current circuit (ABCC). The circuit uses a nano-ampere current source to achieve nano-watt power dissipation and the adaptive biasing technique to achieve high speed operation. The ABCC monitors the input voltages and supplies adaptive biasing current to the AMP. Because the adaptive biasing current is generated only when the AMP does not maintain its virtual short characteristic in the feedback configuration, the circuit operates with nano-watt power dissipation. Measurement results demonstrated that the circuit can operate with ultra-low power of 325 nA and high speed of 0.0506 V/μs at the rise time and 0.0579 V/μs at the fall time, when the input pulse frequency and the amplitude were 1 kHz and 0.8 Vpp. © 2012 IEEE.IEEE, 2012, European Solid-State Circuits Conference, 69 - 72, English[Refereed]International conference proceedings
- A Low-Power Single-Slope Analog-to-Digital Converter with Digital PVT CalibrationA low-power single-slope analog-to-digital converter (SS ADC) is presented that uses an ultra-low-power reference current to achieve nano-watt power dissipation and a digital calibration function to compensate for the effect of process, voltage and temperature (PVT) variations. It converts two analog reference voltages into digital reference codes before it converts the input voltage into an input digital code. The SS ADC is tolerant to PVT variations due to the processing of the input digital code and two reference codes in the digital domain. A prototype was fabricated in the 180 nm CMOS process. Measurements demonstrated that it achieved a signal-to-noise- and-distortion ratio of 40.8 dB and an effective number of bits of 6.49 at a sampling rate of 800 S/s. It dissipated 174 nW in analog power and 36.5 nW in digital power, corresponding to the figure of merit for the 293 pJ/conversion-step.IEEE, 2012, 2012 19TH IEEE INTERNATIONAL CONFERENCE ON ELECTRONICS, CIRCUITS AND SYSTEMS (ICECS), 613 - 616, English[Refereed]International conference proceedings
- A 6.66-kHz, 940-nW, 56ppm/degrees C, Fully On-chip PVT Variation Tolerant CMOS Relaxation OscillatorA fully on-chip CMOS relaxation oscillator (ROSC) with a PVT variation compensation circuit is proposed in this paper. The circuit is based on a conventional ROSC and has a distinctive feature in the compensation circuit that compensates for comparator's non-idealities caused by offset voltage and delay time. We also developed a bias circuit consisting of positive and negative temperature coefficient resistors to obtain the temperature compensated clock frequency. Measurement results demonstrated that the circuit can generate a stable clock frequency of 6.66 kHz. The power dissipation was 940 nW. The measured line regulation and temperature coefficient were 0.98%/V and 56ppm/degrees C, respectively.IEEE, 2012, 2012 19TH IEEE INTERNATIONAL CONFERENCE ON ELECTRONICS, CIRCUITS AND SYSTEMS (ICECS), 97 - 100, English[Refereed]International conference proceedings
- Sep. 2011, 2011 International Conference on Solid State Devices and Materials (SSDM 2011), pp. 176-177, EnglishCurrent compensation circuit for precise nano-ampere current reference[Refereed]International conference proceedings
- We propose a subthreshold Static Random Access Memory (SRAM) circuit architecture with improved write ability. Even though the circuits can achieve ultra-low power dissipation in subthreshold digital circuits, the performance is significantly degraded with threshold voltage variations due to the fabrication process and temperature. Because the write operation of SRAM is prone to failure due to the unbalance of threshold voltages between the nMOSFET and pMOSFET, stable operation cannot be ensured. To achieve robust write operation of SRAM, we developed a compensation technique by using an adaptive voltage scaling technique that uses an on-chip threshold voltage monitoring circuit. The monitoring circuit detects the threshold voltage of a MOSFET with the on-chip circuit configuration. By using the monitoring voltage as a supply voltage for SRAM cells, write operation can be compensated without degrading cell stability. Monte Carlo simulations demonstrated that the proposed SRAM architecture exhibits a smaller write operation failure rate and write time variation than a conventional 6T SRAM.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2011, IEICE TRANSACTIONS ON ELECTRONICS, E94C(6) (6), 1042 - 1048, English[Refereed]Scientific journal
- In this paper, we propose a level shifter circuit capable of handling a wide input voltage range. The circuit is based on a conventional two-stage comparator, and has a distinctive feature in that it operates a current amplification scheme for ultra low-power operation. The proposed circuit can convert low-voltage input digital signals into high-voltage output digital signals. The circuit achieves low power dissipation because it dissipates operating current only when the input signals change. Measurement results demonstrated that the circuit can convert low voltage input signals of 0.4V into 3V output signals. The power dissipation was 0.15 mu W at 0.4-V and 10-kHz input pulse.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2011, IEICE ELECTRONICS EXPRESS, 8(12) (12), 890 - 896, English[Refereed]Scientific journal
- クロス形状フラクタルを用いた画像の高解像度化フラクタル画像符号化を応用した解像度変換手法を提案する.自己相似性を探索する際のブロックの形状とサイズを工夫することにより,高速処理と高画質化を実現した.実験では従来手法の処理時間が24%以上短縮され,更に主観的な品質が向上することを確認した.The Institute of Electronics, Information and Communication Engineers, Apr. 2011, 電子情報通信学会論文誌, vol. J94-D, no. 4, pp. 742-745(4) (4), 742 - 745, Japanese[Refereed]Scientific journal
- We have developed a low-power current reference circuit with little temperature dependence for micro-power LSIs in a 0.35-mu m standard complementary metal-oxide-semiconductor (CMOS) process. The proposed circuit consists of a bias-voltage subcircuit, a current-source subcircuit, and an offset-voltage generation (OVG) subcircuit. The OVG subcircuit consists of a subthreshold MOS resistor ladder. It is used to generate a small offset voltage that is independent of temperature and compensates for the temperature dependence of the reference current. Experimental results demonstrated that the proposed circuit generated a 95-nA reference current and that the total power dissipation was 598 nW. The temperature coefficient of the reference current can be kept within 523 ppm/degrees C at temperatures from -20 to 100 degrees C. (C) 2011 The Japan Society of Applied PhysicsIOP PUBLISHING LTD, Apr. 2011, JAPANESE JOURNAL OF APPLIED PHYSICS, 50(4) (4), English[Refereed]Scientific journal
- 神戸大学大学院工学研究科, 2011, 神戸大学大学院工学研究科・システム情報学研究科紀要, 3, 32 - 39, Japaneseカラー画像に対応した画質評価手法VSNRC—VSNR calculation for color imagesResearch institution
- A low-power current reference circuit was developed in a 0.35-μm standard CMOS process. The proposed circuit utilizes an offset-voltage generation subcircuit consisting of subthreshold MOS resistor ladder and generates temperature compensated reference current. Experimental results demonstrated that the proposed circuit generated a 95-nA reference current, and that the total power dissipation was 586 nW. The temperature coefficient of the reference current can be kept small within 523ppm/°C in a temperature range from -20 to 100°C. ©2011 IEEE.2011, Proceedings of the Asia and South Pacific Design Automation Conference, ASP-DAC, 113 - 114[Refereed]International conference proceedings
- A delay-compensation circuit for low-power subthreshold digital circuits is proposed. Delay in digital circuits operating in the subthreshold region of MOSFETs changes exponentially with process and temperature variations. Threshold-voltage monitoring and supply-voltage scaling techniques are adopted to mitigate such variations. The variation in the delay can be significantly reduced by monitoring the threshold voltage of a MOSFET in each LSI chip and exploiting the voltage as the supply voltage for subthreshold digital circuits. The supply voltage generated by the threshold voltage monitoring circuit can be regarded as the minimum supply voltage to meet the delay constraint. Monte Carlo SPICE simulations demonstrated that a delay-time variation can be improved from having a log-normal to having a normal distribution. A prototype in a 0.35-mu m standard CMOS process showed that the exponential delay variation with temperature of the ring-oscillator frequency in the range from 0.321 to 212 kHz can remain by using compensation in the range from 5.26 to 19.2 kHz.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jan. 2011, IEICE TRANSACTIONS ON ELECTRONICS, E94C(1) (1), 80 - 88, English[Refereed]Scientific journal
- In this paper, we propose a level shifter circuit capable with a wide input voltage range. The circuit is based on a conventional two-stage comparator, and has a distinctive feature in current generation scheme by monitoring input and output logic levels. The proposed circuit can convert low voltage input digital signals into high voltage output digital signals. The circuit achieves low power operation because it dissipates operating current only when the input signals change. A SPICE demonstrated that the circuit can convert low voltage signals of 0.4 V into 3 V. The power dissipation was 6 nW at 0.4-V and 1-kHz input pulse. The circuit is useful for an ultra-low voltage digital circuit system co-existing with high voltage digital circuit systems. © 2011 IEEE.2011, 2011 IEEE 9th International New Circuits and Systems Conference, NEWCAS 2011, pp. 201-204, 201 - 204, English[Refereed]International conference proceedings
- High Current Efficiency Sense Amplifier Using Body-Bias Control for Ultra-Low-Voltage SRAMWe propose a current latch sense amplifier with a current-reuse technique (CLSA-w/CR). The CLSA-w/CR is capable of high-speed pre-charging with little increase in power dissipation. The CLSA-w/CR controls body bias voltages of pre-charge transistors in a conventional CLSA. Even though a forward body bias control over MOSFETs can achieve highspeed operation of the circuit, it induces large substrate leakage current and increases the power dissipation of the circuit. The CLSA-w/CR we propose, however, can achieve high-speed pre-charging without increasing power dissipation. We evaluated the performance of the CLSA-w/CR using SPICE with a set of 0.35/.L m standard CMOS parameters. The pre-charge time decreased by 86.9% and the power dissipation increased by only 8.6% compared to that of a conventional CLSA. The CLSA-w/CR showed high-speed pre-charging with small power overhead.IEEE, 2011, 2011 IEEE 54TH INTERNATIONAL MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS (MWSCAS), Wp2Track2_1-1, English[Refereed]International conference proceedings
- A level shifter circuit capable of extremely low-voltage inputs is presented in this paper. The circuit has a distinctive feature in current generation scheme with logic error correction circuit by detecting input and output logic levels. The proposed circuit can convert low-voltage input digital signals into high-voltage output digital signals. The circuit achieves low-power operation because it dissipates operating current only when the input signals change. Measurement results demonstrated that the circuit can convert low-voltage input signals of 0.4 V into 3 V output signals. The power dissipation was 58 nW at 0.4-V and 10-kHz input pulse. © 2011 IEEE.2011, European Solid-State Circuits Conference, pp. 199-202, 199 - 202, English[Refereed]International conference proceedings
- A 105-nW CMOS Thermal Sensor for Power-aware ApplicationsWe propose an ultra-low power thermal sensor consisting of a nano-ampere CMOS current source circuit and a single bipolar transistor. Since the stability of current source circuits is the most important issue for our thermal sensor, we developed a circuit with an improved process and temperature stability. Our simulations and the measurements we conducted on the proposed thermal sensor demonstrated that it can be robustly operated in a wide temperature range. The power dissipation of the circuit was 105 nW for a 3-V power supply. The accuracy was within +/- 1 degrees C in a wide temperature range of -20 to 120 degrees C.IEEE, 2011, 2011 IEEE SENSORS, pp. 1265-1268, 1265 - 1268, English[Refereed]International conference proceedings
- An ultra-low power comparator circuit using adaptive bias current generator (ABCG) is proposed. The circuit consists of an input differential pair, an ABCG, and a latch circuit. The ABCG generates an adaptive bias current, and the latch circuit determines the output logic and controls the operation of the ABCG for ultra-low power dissipation. The ABCG and the latch operate only when the input voltage levels and the logic of the latch do not correspond with each other. Measurements demonstrated that the circuit can achieve highspeed and low-power dissipation due to such operation. The standby current was 18.9 nA with a 10-nA bias current. The power dissipation was 88.5 nW at a 1-kHz input frequency and 3-V supply voltage. © 2011 IEEE.2011, 2011 Proceedings of Technical Papers: IEEE Asian Solid-State Circuits Conference 2011, A-SSCC 2011, pp. 237-240, 237 - 240, English[Refereed]International conference proceedings
- We describe an automatic video digesting technique for broadcasted baseball games based on information entropies derived from an overlayed score ticker. The overlayed score ticker of baseball games displays the current score of each team, the inning, and the number of balls/strikes/outs, and whether or not there are runners on base. This information is used to estimate specific events in baseball that we defined: 3 runner situations, 8 batting results, and 4 types of scores. Rare events such as a "home run" have higher information entropy, and frequent events such as "out" have lower entropy. We suppose that an event with higher information entropy is a more important scene for video digesting. Thus, the scenes with higher entropies are selected by priority and embedded into a limited timeline. In our experiment, we applied our technique to broadcasted baseball games and compared it with a conventional sound volume based technique. The two techniques were evaluated subjectively by watching generated videos. We found that our technique has higher performance.Dec. 2010, Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers, 64(12) (12), 1940 - 1943, Japanese[Refereed]Scientific journal
- Dec. 2010, 映像情報メディア学会誌, vol.64, no.12, pp.1940-1943, Japanese情報エントロピーに基づく野球中継番組のダイジェスト自動生成[Refereed]Scientific journal
- In this paper, we propose an error diagnosis technique based on clustering LUT elements to shorten the processing time. By grouping some elements as a cluster, our technique reduces the number of elements to be considered, which is effective to shorten the processing time for screening error location sets. First, the proposed technique partitions the circuit into FFR (fanout-free region) called cluster, which is a subcircuit composed of LUT elements without fanout. After screening the set of clusters including error locations, this technique screens error location sets composed of elements in the remaining set of clusters, where corrections should be made. Experimental results with benchmark circuits have shown that our technique shortens the processing time to 1/170 in the best case, and rectifies circuits including 6 errors which cannot be rectified by the conventional technique. Copyright © 2010 The Institute of Electronics, Information and Communication Engineers.Dec. 2010, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E93-A(12) (12), 2490 - 2496, Japanese[Refereed]Scientific journal
- Supply voltage scaling in accordance with device scaling has achieved low power dissipation of CMOS LSIs. Because each circuit block in an LSI requires suitable supply voltages, the large voltage gap between each circuit block makes it hard to convert signals between circuit blocks. Therefore, a level converter to solve this problem is a key component for low-voltage LSIs. In this paper, a level converter tolerant to large suply-voltages-gap has been deveolped in a 0.35-μm CMOS process. It can achieve low power operation because it dissipates supply current only when the input signal changes. Measurement results showed that the level converter transformed sinals of 0.4V to 3V.The Institute of Image Information and Television Engineers, 2010, ITE Technical Report, 34, 133 - 138, Japanese
- We propose the use of a super-resolution (SR) technique for thermographies. This system captures several thermal images for a reconstruction-based SR. However, it does not require the subpixel registration required by conventional SRs. In this system, a pair of a low-resolution thermal image and a high-resolution visible image is captured synchronously. While the thermal images are used as source data for SR, the visible images are used for pixel registrations. Because the resolution of the visible images from CCD sensors is over 4 times higher than that of the thermal images, a simple pixel registration on the former is equivalent to a precise subpixel registration on the latter. Thus, we can reconstruct a high quality thermogram without the need for a complex subpixel registration technique. Experimental results demonstrate that a pair of a thermographic camera with only 8 x 8 pixels and a visible CCD camera with 320 x 240 pixels generates a thermogram with 32 x 32 pixels. This fact means that a pair of a low cost thermographic camera and a standard CCD camera provides high-quality thermography. ©2010 IEEE.2010, ISCAS 2010 - 2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems, 1895 - 1898[Refereed]International conference proceedings
- In this paper, we propose a subthreshold Static Random Access Memory (SRAM) circuit architecture with improved write ability. In subthreshold digital circuits, though the circuits can achieve ultra-low power dissipation, the performance is significantly degraded with threshold voltage variations due to the fabrication process and temperature. In particular, because the write operation of SRAM is prone to fail due to the unbalance of threshold voltages between the nMOSFET and pMOSFET, stable operation cannot be ensured. To achieve robust write operation of SRAM, we developed a compensation technique by using an adaptive voltage scaling technique that uses an onchip threshold voltage monitoring circuit. The monitoring circuit detects the threshold voltage of a MOSFET with the on-chip circuit configuration. By using the monitoring voltage as a supply voltage for SRAM cells, write operation can be compensated. Monte Carlo simulations demonstrated that the proposed SRAM architecture exhibits a less write operation failure rate and smaller write time variation than a conventional 6T SRAM. © 2010 IEEE.2010, Midwest Symposium on Circuits and Systems, 133 - 136[Refereed]International conference proceedings
- In this paper, we propose a low-power current reference circuit with little temperature dependence for micro-power electronics applications. The current reference circuit consists of a bias-voltage subcircuit, a current-source subcircuit, and an offset-voltage generation subcircuit. The offset-voltage generation subcircuit is used to compensate for temperature dependence of the reference current. A SPICE simulation demonstrated that the circuit generates a 93-nA current, and the total power dissipation is 811 nW. The temperature coefficient of the reference current can be kept small, i.e., within 288ppm/°C, in a temperature range of -20 to 100°C. © 2010 IEEE.2010, Midwest Symposium on Circuits and Systems, 668 - 671[Refereed]International conference proceedings
- This paper proposes CMOS bandgap reference (BGR) and sub-BGR circuits without resistors for nanowatt power LSIs. The BGR circuit consists of a nano-ampere current reference, a bipolar transistor, and a proportional to absolute temperature (PTAT) voltage generator. The PTAT voltage generator consists of source-coupled differential pairs and generates a positive temperature dependent voltage. The PTAT voltage generator compensates for negative temperature dependence of a base-emitter voltage in a PNP bipolar transistor. The circuit generates a bandgap voltage of silicon. The sub-BGR circuit uses a voltage divider to generate low-voltage sub-bandgap reference. Experimental results demonstrated that the BGR and sub-BGR circuits can generate a 1.18-V and 553-mV reference voltages, respectively. The power dissipation of the BGR and sub-BGR circuits were 108-nW and 110-nW, respectively. ©2010 IEEE.2010, 2010 IEEE Asian Solid-State Circuits Conference, A-SSCC 2010, 77 - 80[Refereed]International conference proceedings
- We have developed a nano-ampere CMOS current reference circuit that is tolerant to threshold voltage variations. This paper describes the circuit and its temperature dependence control technique for ultra-low power LSIs. Because the generated current increases with temperature, we propose a temperature dependence control architecture for a reference current by using the different temperature characteristics of "electron" and "hole" mobilities. Experiment results demonstrated that the circuit can generate a temperature compensated reference current of 9.95 nA and that the temperature dependence of the output reference current can be controlled by using the different temperature dependences of electron and hole mobilities. The temperature dependence controllability was 8.57 pA/°C·bit and its total current dissipation was 68.1 nA. ©2010 IEEE.2010, ESSCIRC 2010 - 36th European Solid State Circuits Conference, 114 - 117[Refereed]International conference proceedings
- This paper presents an error diagnosis technique for incremental synthesis, called EXLLS (Extended X-algorithm for LUT-based circuit model based on Location sets to rectify Subcircuits), which rectifies five or more functional errors in the whole circuit based on location sets to rectify subcircuits. Conventional error diagnosis technique, called EXLIT, tries to rectify five or more functional errors based on incremental rectification for subcircuits. However, the solution depends on the selection and the order of modifications on subcircuits, which increases the number of locations to be changed. To overcome this problem, we propose EXLLS based on location sets to rectify subcircuits, which obtains two or more solutions by separating i) extraction of location sets to be rectified, and ii) rectification for the whole circuit based on the location sets. Thereby EXL LS can rectify five or more errors with fewer locations to change. Experimental results have shown that EXLLS reduces increase in the number of locations to be rectified with conventional technique by 90.1%. Copyright © 2009 The Institute of Electronics, Information and Communication Engineers.Dec. 2009, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E92-A(12) (12), 3136 - 3142, English[Refereed]Scientific journal
- Instability of SRAM memory cells derived from aggressive technology scaling has become one of the most significant issues. Although lowering the supply voltage for a memory cell (VDDM) improves a write margin, which increases the access time. In this paper, we propose a memory cell employing a Look-ahead Active Body-biasing (LAB) scheme for SOI-SRAM with the dynamic VDDM control. Simulation results have shown that the proposed SRAM cell shortens the access time by 54% in the write mode, while expanding read and write margins and reducing effects of variations in the threshold voltage on them. © IEICE 2009.Apr. 2009, IEICE Electronics Express, 6(8) (8), 456 - 460, English[Refereed]Scientific journal
- This paper presents an automatic video-digesting technique for broadcasted baseball games based on telop data on TV. We analyze a progress of a baseball game with score telops and collect important scenes based on information entropies for baseball events. Since rare events such as "home run" have high entropies and frequent events such as "out" have low ones, we collect a scenes including high entropy events. Thus a digest video including much information for limited time is generated. In the experiments, we compared the proposed technique with a conventional technique based on sound information and ensured its utility.The Institute of Image Information and Television Engineers, 2009, ITE Technical Report, 33, 25 - 28, Japanese
- Subthreshold LSIs can achieve ultra-low power. However, threshold voltage variations with temperature and fabrication process have significant impact on the circuit performance. In subthreshold digital circuits, delay time changes exponentially with threshold-voltage variations. To solve this problem, we propose a delay-compensation technique for subthreshold digital circuits. On-chip threshold-voltage monitoring and supply-voltage scaling are adopted to mitigate threshold-voltage variations. As examples of subthreshold digital circuits, we have evaluated the delay time in a ring oscillator and an 8-bit ripple carry adder. With the proposed techinque, the delay time can be improved from log-normal to normal distribution.The Institute of Image Information and Television Engineers, 2009, ITE Technical Report, 33, 165 - 170, Japanese
- This paper describes a switching-voltage detector and compensation circuits for an ultra-low-voltage CMOS inverter. The switching voltage of an inverter is an important design parameters for a digital circuit, and is determined by the difference in threshold voltages between MOSFETs. However, switching voltage varies significantly with fabrication process conditions and temperature. To address this problem, we have developed a threshold voltage difference detector circuit. We have also proposed a possible compensation technique for the inverter. Monte Carlo simulations demonstrated that the threshold voltage detector circuit can monitor the threshold voltage difference between pMOSFET and nMOSFET, and that the proposed inverter can achieve 80% reduction in switching-voltage variation compared to a conventional CMOS inverter. © 2009 IEEE.2009, Midwest Symposium on Circuits and Systems, 483 - 486[Refereed]International conference proceedings
- In this paper, we propose delay-compensation techniques for subthreshold digital circuits. Delay in digital circuits that are operated in the subthreshold region of a MOSFET changes exponentially with variations in threshold voltage. To mitigate such variations, threshold-voltage monitoring and supply-voltage scaling techniques are adopted. By monitoring the threshold voltage of each LSI chip and exploiting the voltage to supply voltage to subthreshold digital circuits, variations in delay time can be suppressed significantly. Monte Carlo SPICE simulation demonstrates that delay-time distribution can be improved from log-normal to normal. The coefficient of variation for the proposed technique is 31%. © 2009 IEEE.2009, Midwest Symposium on Circuits and Systems, 503 - 506[Refereed]International conference proceedings
- Crosstalk repair by gate sizing often increases the noise on adjacent wires, and results in cyclical iterations of noise repair. We propose a Delayed Actively Body-bias Controlled (D-ABC) SOI scheme for crosstalk noise repair by providing delayed forward bias to drivers. The delay between gate and body suppresses the crosstalk noise on adjacent wires. The proposed D-ABC SOI scheme has reduced the crosstalk noise by 48.5%, with 4.3% increase in the crosstalk noise on adjacent wires. © IEICE 2008.May 2008, IEICE Electronics Express, 5(9) (9), 354 - 360, English[Refereed]Scientific journal
- Instability of SRAM memory cells derived from the process variation and lowered supply voltage has recently been posing significant design challenges for low power SoCs. This paper presents a boosted word line voltage scheme, where an active body-biasing controlled boost transistor generates a pulsed word line voltage by capacitive coupling only when accessed. Simulation results have shown that the proposed approach not only shortens the access time but mitigates the impact of Vth variation on performance even at ultra low supply voltage less than 0.5 V. © 2008 Academy Publisher.Academy Publisher, 2008, Journal of Computers, 3(5) (5), 34 - 40, English[Refereed]Scientific journal
- An important issue with MTCMOS circuits is the energy consumption for charging virtual P/G lines during the sleep/active mode transitions. Charge recycling is an effective technique to reduce it. We propose a technique to reuse more charge by dividing a circuit into several blocks, where the charge is transferred between the properly selected pairs. Assuming ideal situation, we can improve the energy saving ratio up to 63.6% from 50%. Our scheme uses the additional control circuit employing only a delay circuit to minimize the power overhead. The proposed method has improved the ratio by 10.0%, and total power by 7.1%. © IEICE 2007.Sep. 2007, IEICE Electronics Express, 4(18) (18), 562 - 568, English[Refereed]Scientific journal
- Instability of SRAM memory cells derived from aggressive technology scaling has been recently one of the most significant issues. Although a 7T-SRAM cell with an area-tolerable separated read port improves read margins even at sub-1V, it unfortunately results in degradation of write margins. In order to assist the write operation, we address a new memory cell employing a look-ahead body-bias which dynamically controls the threshold voltage. Simulation results have shown improvement in both the write margins and access time without increasing the leakage power derived from the body-bias. Copyright © 2007 The Institute of Electronics, Information and Communication Engineers.Institute of Electronics, Information and Communication, Engineers, IEICE, 2007, IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E90-A(12) (12), 2691 - 2694, English[Refereed]Scientific journal
- Instability of SRAM memory cells derived from aggressive technology scaling has recently been one of the most significant issues. Although a 7T-SRAM cell with an areatolerable separated read port improves read margins even at sub-1V, it unfortunately results in degradation of write margins. Then, we address a new memory cell adopting a lookahead body-bias which dynamically controls the threshold voltage in order to assist the write operation. Simulation results have shown improvement in both the write margins and access time. ©2007 IEEE.2007, Midwest Symposium on Circuits and Systems, 578 - 581, English[Refereed]International conference proceedings
- In this paper, we propose an Active Body-biasing Controlled (ABC)-Bootstrap PTL (Pass-Transistor Logic) on PD-SOI for ultra low power design. Although simply lowering the supply voltage (VDD) causes a lack of driving power, our boosted voltage scheme employing a strong capacitive coupling with ABC-SOI improves a driving power and allows lower voltage operation. We also present an SOI-SRAM design boosting the word line (WL) voltage higher than VDD in short transition time without dual power supply rails. Simulation results have shown improvement in both the delay time and power consumption. Copyright © 2007 The Institute of Electronics, Information and Communication Engineers.Institute of Electronics, Information and Communication, Engineers, IEICE, 2007, IEICE Transactions on Electronics, E90-C(4) (4), 666 - 674, English[Refereed]Scientific journal
- Ultra low voltage operation with bootstrap scheme for single power supply SOI-SRAMThis paper presents an SOI-SRAM design employing a bootstrap scheme for ultra low voltage operation. The Active Body-biasing Control (ABC) with PD-SOI is a key idea to enhance the boosting effect owing to a strong capacitive coupling. Our ABC-bootstrap scheme enables boosting the word line (WL) voltage higher than the supply voltage in short transition time without dual power supply rails. Simulation results have shown improvement in both the access time and operation at ultra low supply voltage less than 0.5 V.IEEE, 2007, 20TH INTERNATIONAL CONFERENCE ON VLSI DESIGN, PROCEEDINGS, pp. 609-614, 609 - +, English[Refereed]International conference proceedings
- We developed a technique to detect duplicated scenes, such as commercial messages, TV program theme songs, and repeated scenes from MPEG streams. Conventional matching techniques require numerous calculations to estimate similarity between scenes. In our technique, similarity is estimated with compressed code sizes without decoding pictures. We divided scenes into shots by detecting cut points, which probably correspond to large segments of generated code in MPEG streams. Pictures in these shots are not decoded, but only shot lengths are used for scene matching. If a series of shot lengths for scene A is the same as that for scene B, we can infer that both scenes are identical. This technique, called shot length matching (SLM), requires no image processing and works very fast. We applied SLM to 80 min. MPEG streams stored on an hard disk drive to detect and delete duplicated scenes, and we obtained 99.5 % precision and a processing time of 0.157 s.Nov. 2006, Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers, 60(11) (11), 1823 - 1828, Japanese[Refereed]Scientific journal
- Nov. 2006, 映像情報メディア学会誌, vol.60, no.11, pp.1823-1828, Japanese生成符号量に着目したMPEGストリーム中における重複シーンの検出[Refereed]Scientific journal
- The dual supply voltage (dual-VDD) scheme reduces the active power consumption without performance degradation by using two power supply rails. However, an increase in the delay due to the scaled-down supply voltage has made assigning the lower supply voltage (VDDL) more difficult in the conventional dual-VDD scheme. We propose a technique for the dual-VDD scheme employing the Active Body-biasing Control (ABC) on PD-SOI, which increases the number of VDDL-cells owing to lowered threshold voltage. Simulation results have shown our approach effectively reduces the power consumption even at low voltage operation.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Nov. 2006, IEICE ELECTRONICS EXPRESS, 3(21) (21), 453 - 458, English[Refereed]Scientific journal
- In MTCMOS, the circuit state should be preserved for state retentive sleep, and the virtual power/ground rails clamp (VRC) scheme is an effective method for this purpose. Our approach realizes the voltage clamp function without additional devices like diodes, by feeding the virtual ground voltage back into a sleep signal. There are also other effects; cutting off the leak current of the sleep buffer, and charge recycling of sleep signal node. We have achieved a 19.7% lower power consumption and a 5.4% cell area reduction.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2006, IEICE ELECTRONICS EXPRESS, 3(12) (12), 281 - 286, English[Refereed]Scientific journal
- A triple density Error Diffusion for medical monochrome LCDs is proposed to improve their gray-scale precisions. In addition, a measurement technique of image qualities based on E-MSE (Eye model-based Mean Square Error) is proposed. Several conventional techniques for medical LCDs, such as Sub-Pixel Modulation and Error Diffusion, are evaluated based on E-MSE and the validity of the proposed technique is ensured objectively.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Jun. 2006, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E89A(6) (6), 1866 - 1868, English[Refereed]Scientific journal
- We propose estimation technique of user preferences for TV programs based on channel operations. The user preferences are available for automatic recommendation of TV programs. For practical use, automatically learning the preferences of a user from a channel selection history is important. However, obtaining such information is difficult because most users change channels frequently and do not watch programs from beginning to end. For automatic learning under such situations, an appropriate hypothesis describing the relationship between viewing time and preference degree for a program is needed. We propose three hypotheses and compared their utility in our program recommendation system. Experimental results showed that the preference for a TV program is not proportional to the viewing time, but becomes either 1 (like) or 0 (dislike) about 30 minutes after channel selection.Mar. 2006, Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers, 60(3) (3), 454 - 457, Japanese[Refereed]Scientific journal
- Mar. 2006, 映像情報メディア学会誌, Vol. 60,No. 3, pp.454-457, Japaneseテレビ視聴者の選局行動に基づく番組嗜好度の推定[Refereed]Scientific journal
- High performance CMOS circuit by using charge recycling active body-bias controlled SOIIn this paper, we propose a new technique for higher circuit speed without increase in leakage current by using active body-bias controlling technique. Conventional body-bias controlling techniques face difficulties, such as long transition time of body voltage and large area penalty. To overcome these issues, we propose a Charge Recycling Active Body-bias Controlled (CRABC) circuit scheme on SOI which enables quick control of body voltage by using simple additional circuit. The SPICE simulation results have shown that CRABC shortens delay time by 20%, and transition time for controlling body-bias by 98%.SPRINGER-VERLAG BERLIN, 2006, INTEGRATED CIRCUIT AND SYSTEM DESIGN: POWER AND TIMING MODELING, OPTIMIZATION AND SIMULATION, 4148, 393 - 402, English[Refereed]Scientific journal
- Active body-biasing control technique for bootstrap pass-transistor logic on PD-S01 at 0.5V-VDDIn this paper, we propose an Active Body-biasing Controlled (ABC)-Bootstrap PTL (Pass-Transistor Logic) on PD-SOI at 0.5 V-V-DD for ultra low power design. Applying active body-biasing to Bootstrap PTL is the key for higher performance without output voltage loss by boosting gate voltage with coupling capacitance between source and body. Lowering V-th by body biasing also contributes for high speed operation. Experimental results have shown improvement in both delay time and power consumption.IEEE, 2005, 2005 IEEE International SOI Conference, Proceedings, pp. 50-51, 50 - 51, English[Refereed]International conference proceedings
- 2005, 電子情報通信学会論文誌, J88-A(2),142-151, Japanese社内環境における頭部追跡を目的とした赤外線マルチカメラシステムの開発[Refereed]
- A novel layout approach using dual supply voltage technique on body-tied PD-SOIThis paper presents a novel layout approach using dual supply voltage technique. In Placing and Routing (P&R) phase, conventional approaches for dual supply voltages need to separate low supply voltage cells from high voltage ones. Consequently its layout tends to be complex compared with single supply voltage layout. Our layout approach uses cells having two supply voltage rails. Making these cells is difficult in bulk due to increase in area by n-well isolation or in delay by negative body bias caused by sharing n-well. On the other hand, making cells with two supply voltage rails is easy in body-tied PD-SOI owing to trench isolation of each body of transistor. Since our approach for dual supply voltages offers freedom for placement as much as conventional ones for single supply voltage, exsting P&R tools can be used without special operation. Simulation results with MCNC circuits and adders show that our approach reduces power by 23% and 25%, respectively, showing almost the same delay with single supply voltage layout.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Dec. 2004, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E87A(12) (12), 3244 - 3250, English[Refereed]Scientific journal
- 先見型動的ボディ制御によるSOI LSIの高速化手法We propose an approach for higher performance of circuits in SOI LSI based on Active Body Bias (ABB) method. Although conventional ABB method using limiter transistors has been less effective for high speed circuits due to delay of body bias voltage, we improve performance by using signals from previous stages or by focusing on difference of signal arrival times. From the results of circuit simulation, we have confirmed that our technique improves circuit speed by 15% in comparison with conventional approach for a Manchester Carry Chain Adder. Also with an MUX circuit, the standby leakage current has been reduced to 1/20 of that by the DC-bias method.Information Processing Society of Japan (IPSJ), 2004, 情報処理学会論文誌,45(5),1244-1250, 48,226-228(5) (5), 1244 - 1250, Japanese[Refereed]Scientific journal
- 2004, 11th International Display Workshops(IDW2004), 1643-1645, EnglishTriple density error diffusion for medical monochrome LCDs and evaluation of its performance[Refereed]Scientific journal
- 2004, 情報処理学会論文誌,45(5),1236-1243, 48,226-228, JapanesePD-S01のクロック・ゲーティング機構に対応したリーク電力削減手法[Refereed]Scientific journal
- 2004, 12th Workshop on synthesis and system Integration of Mixed Information Technologies(SASIMI2004), 345-350, EnglishExtraction of subcircuits for incremental synthesis based on error diagbosis[Refereed]Scientific journal
- 2004, 12th Workshop on synthesis and system Integration of Mixed Information Technologies(SASIMI2004), 339-344, EnglishError diagnosis techniquie based on boolean resubstitution[Refereed]Scientific journal
- Reduction of FFT circuit area for OFDM demodulator based on skipping-point representationIn order to reduce FFT circuit area in OFDM demodulator for terrestrial digital broadcasting system in Japan, we propose an approach to reduce bit width for operations without performance degradation of the demodulator. The most important point is employing 11-bit skipping-point representation for internal operation in FFT instead of 14-bit fixed-point representation. The assignment of bit-fields that minimizes BER (Bit Error Rate) has been chosen for the 11-bit skipping-point representation: 10 bit for significand, and I bit for radix-16 exponent. By reducing the bit width for internal operation from 14 to 11, we can reduce the circuit area by 17.6 % with the complex multipliers, and by 21.4 % with the RAM's used in FFT. In total, the area of the whole FFT circuit has been reduced by 18 %. This result shows the effectiveness of the proposed method.IEEE, 2004, PROCEEDINGS OF 2004 IEEE ASIA-PACIFIC CONFERENCE ON ADVANCED SYSTEM INTEGRATED CIRCUITS, 430-431, 430 - 431, English[Refereed]International conference proceedings
- Lossless coding of color quantized images based on pseudo distanceAs pixels in quantized images such as GIF formatted images with 256 colors are usually represented by index numbers in a color Palette, it is impossible to get high efficient compression by using conventional predictive coding to such images. In this paper, a novel predictive coding approach is proposed for images with quantized colors. In this approach, the prediction error is not a index number difference between an original color and its predicted color, but a value called as "pseudo distance" which is related to the Euclidian distance between these two colors in the 3-D color space. As the pseudo distance is small when the predicted color is perceptually close to the original color, the distribution of the pseudo distance is peaklike resulting in low entropy. Preliminary computer simulation results show that the proposed approach outperforms the index based linear prediction.IEEE, 2004, 2004 47TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL I, CONFERENCE PROCEEDINGS, 1,245-247, 245 - 247, English[Refereed]International conference proceedings
- Leakage power reduction for clock gating scheme on PD-SOIThis paper presents a technique for reducing leakage power of the circuits employing a clock gating scheme on Partially Depleted Silicon On Insulator (PD-SOI). To reduce leakage power while a local clock is disabled, V-th of each transistor is dynamically controlled by body biasing corresponding to the mode of the local clock. Using PD-SOI is the key to control V-th within one clock cycle by forward biasing, where V-th without biasing is designed higher than usual to reduce leakage power. The SPICE simulation results have shown that the proposed technique reduces leakage power by 82% with small area penalty.IEEE, 2004, 2004 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL 2, PROCEEDINGS, 11,613-616, 613 - 616, English[Refereed]International conference proceedings
- Improvement of image quality by optical image processing suitable for pixel shape of displayAn optical image processing to improve image quality on flat panel displays is proposed. In this method, grid lines between adjacent pixels are hidden by scattering their luminescence areas. It can restrain jaggies and moires on images. The validity of the proposed technique is evaluated with eye model-based SNR objectively.IEEE, 2004, 2004 47TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL I, CONFERENCE PROCEEDINGS, 1,305-308, 305 - 308, English[Refereed]International conference proceedings
- A technique for high-speed circuits on SOI using look-ahead type active body bias controlWe propose an approach for higher performance on SOI employing Look-Ahead type Active Body Bias (LA-ABB) method to control the threshold voltage (V-th) Of transistors dynamically. Although conventional ABB method using subsidiary transistors has been less effective for high-speed circuits due to delay of body bias voltage, we improve performance by using signals from previous stages or by focusing on difference of signal arrival times. Experimental results by circuit simulation have shown that our technique is effective to shorten delay time even with high-speed circuits on SOI.IEEE, 2004, 2004 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL 2, PROCEEDINGS, 11,405-408, 405 - 408, English[Refereed]International conference proceedings
- An LUT-based error diagnosis technique improved in multiplicity of rectifiable errorsIn an LSI design process, Engineering Change Orders (ECO's) are often given due to logic design errors, changes of specification, and timing issue. This paper presents an improved technique called EXLIT to rectify multiple logic design errors using LUT-based circuit model, which is needed to rectify errors with compound cells often used in standard-cell design. In contrast to the conventional technique: EXLTV applicable only to four errors at the maximum, EXLIT rectifies ten errors by employing iterative diagnosis procedure for subcircuits extracted based on the correctness of primary output functions. By handling the sulicircuits, EXLIT reduces both the number of LUT's and the number of errors to be considered at once. Experimental results demonstrate that most of circuits including eight to ten design errors can be rectified within shorter processing time.IEEE, 2004, 2004 47TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL I, CONFERENCE PROCEEDINGS, 1,525-528, 525 - 528, English[Refereed]International conference proceedings
- 2004, Workshop on Wireless Circuits and Systems, 16-17, EnglishAn approach for reducing circuit size of equalizer in 8PSK demodulator for BS digital broadcasting[Refereed]
- An approach for integration of demodulators for digital broadcastingWe propose a method to reduce the circuit size with demodulators for BS digital broadcasting and for terrestrial broadcasting by integrating them. Specifically, we propose an approach for integrating an FIR filter in a BS demodulator, and a carrier filter in a demodulator for terrestrial broadcasting. Experimental results have shown that the proposed approach reduces 17 % of the circuit size compared with the sum of each filter.IEEE, 2004, PROCEEDINGS OF 2004 IEEE ASIA-PACIFIC CONFERENCE ON ADVANCED SYSTEM INTEGRATED CIRCUITS, 416-417, 416 - 417, English[Refereed]International conference proceedings
- Adaptive arithmetic coding for image prediction errorsThis paper presents adaptive arithmetic coding of prediction errors in lossless image compression. Generally, a probability distribution of the errors forms Laplacian distribution with zero mean, but the variance sigma of the distribution may take different value at each local area in the image. The proposed encoder estimates the variance sigma at every pixel to update the probability table. First, at a target pixel, the variance sigma that maximizes the posterior probabilities of neighboring errors is calculated. Next, the error at the target pixel is encoded by arithmetic coding based on probability distribution with the variance a. Since this method calculates the probabilities from fewer neighboring errors, they respond to the rapid changes of image characteristic in narrow area. In this paper, the proposed method is compared with Lempel-Ziv, Huffman, static/adaptive arithmetic coding and JPEG arithmetic coding, and then compression ratios are discussed. On an average, it generates 5% smaller size of compressed data than the adaptive arithmetic method by JPEG.IEEE, 2004, 2004 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL 3, PROCEEDINGS, 111,961-964, 961 - 964, English[Refereed]International conference proceedings
- Application of error diagnosis technique to incremental synthesisIn an LSI design process, Engineering Change Orders (ECO's) are often given even after the layout process. This letter presents an approach to change the design to satisfy the new specification with ECO's by employing an error diagnosis technique. Our approach performs incremental synthesis using spare cells embedded on the original layout. Experimental results show that applying the error diagnosis technique to incremental synthesis is effective to suppress increase in delay time caused by ECO's.IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Dec. 2003, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E86A(12) (12), 3214 - 3217, English[Refereed]Scientific journal
- ASSOC INTELLIGENT MACHINERY, 2003, PROCEEDINGS OF THE 7TH JOINT CONFERENCE ON INFORMATION SCIENCES, 903 - 906, EnglishAutomatic classification of proper names in protein-related literatures using database retrieval on WWW[Refereed]International conference proceedings
- 2003, 情報処理学会論文誌, 44(5),1216-1224, Japanese信号線誤りに対応したLUT 論理診断手法[Refereed]Scientific journal
- BDD形状を考慮したパス・トランジスタ論理セルによる低消費電力回路レイアウト方式We present a layout design approach for pass-transistor logic circuits with lower power and delay by reducing wiring complexity based on a library-free approach and multiple row placement style for pass-transistors in the cells. This approach has two features: on-the-fly generation of dedicated cells of sizes larger than conventional predesigned cells, and placement of transistors in the cells based on the structure of BDD for the given logic function. Experimental results for benchmark circuits and a Wallace tree for 16-bit multiplier have shown lower energy-delay products than conventional approaches including CMOS logic circuits.Information Processing Society of Japan (IPSJ), 2003, 情報処理学会論文誌, 44(5),1292-1300(5) (5), 1292 - 1300, Japanese[Refereed]Scientific journal
- 2003, 11th Workshop on Synthesis and System Integration of Mixed Technologies(SASIMI2003), 61-68, 61 - 68, EnglishAn improved multiple error diagnosis technique using symbolic simulation with truth variables and its application to incremental synthesis for standard-cell desing.[Refereed]Scientific journal
- A layout design approach for low power sirsuits using on-the-fly generation of pass transistor logic cells based on BDD structure.We present a layout design approach for pass-transistor logic circuits with lower power and delay by reducing wiring complexity based on a library-free approach and multiple row placement style for pass-transistors in the cells. This approach has two features: on-the-fly generation of dedicated cells of sizes larger than conventional predesigned cells, and placement of transistors in the cells based on the structure of BDD for the given logic function. Experimental results for benchmark circuits and a Wallace tree for 16-bit multiplier have shown lower energy-delay products than conventional approaches including CMOS logic circuits.Information Processing Society of Japan (IPSJ), 2003, 11th Workshop on Synthesis and System Integration of Mixed Technologies(SASIMI2003), 47-53(5) (5), 1292 - 1300, English[Refereed]Scientific journal
- Layered blind deconvolution using interband prediction is proposed as a solution to the image recovery problem. With conventional layered blind deconvolution, it was difficult to recover high-band components after subband segmentation. With the proposed algorithm, high-band components are generated from low-band components using interband prediction, and synthesized results are used as initial images for subsequent layers, thus improving the quality of recovered images. The efficiency of interband prediction is proved through comparison in recovery performance between the proposed and conventional method.Scripta Technica Inc, Mar. 2000, Systems and Computers in Japan, 31(3) (3), 77 - 83, English[Refereed]Scientific journal
- 1997, Systems and Computers in Japan, 28(6) (6), 30 - 39Scientific journal
- ATM DATA-TRANSMISSION SYSTEMS BASED ON N-ISDNA novel approach for data transmission in N-ISDN (narrow band integrated services digital network) is proposed here. This approach uses the ATM (asynchronous transfer mode) technology normally applied to B-ISDN (broad band ISDN) and provides high performance for the simultaneous transmission of several types of burst information using a single N-ISDN line. It will be compatible to B-ISDN in the future, In this paper, the proposed transmission model is first outlined, including its system description, the layer construction and the functional elements. Then, the transmission protocol is described in detail. Finally, a simulation system is realized, and the performance of the transmission system is confirmed by the simulation results which show the usefulness of the proposed data transmission mode.IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, Feb. 1995, IEEE TRANSACTIONS ON COMMUNICATIONS, 43(2-4) (2-4), 1785 - 1792, English[Refereed]Scientific journal
- [電子情報通信学会], 17 May 2018, 回路とシステムワークショップ論文集 Workshop on Circuits and Systems, 31, 74 - 79, JapaneseDesign of Hysteresis Comparator for Active Diode
- 電子情報通信学会, 30 Jan. 2017, 電子情報通信学会技術研究報告 = IEICE technical report : 信学技報, 116(446) (446), 81 - 86, JapaneseA fully on-chip, ultra-low power RC oscillator with current mode architecture for real time clock applications
- 電子情報通信学会, 05 Sep. 2016, 電子情報通信学会技術研究報告 = IEICE technical report : 信学技報, 116(210) (210), 69 - 74, JapaneseAn Efficient and Small-Scaled RNN Hardware Architecture Based on Approximation of RNN Algorithm for Hardware Implementation
- 映像情報メディア学会, Aug. 2016, 映像情報メディア学会技術報告 = ITE technical report, 40(24) (24), 3 - 8, JapaneseA fast-start up and fully-integrated 32-MHz clock generator for intermittent VLSI systems
- 電子情報通信学会, 01 Aug. 2016, 電子情報通信学会技術研究報告 = IEICE technical report : 信学技報, 116(173) (173), 3 - 8, JapaneseA fast-start up and fully-integrated 32-MHz clock generator for intermittent VLSI systems
- Forum on Information Technology, 24 Aug. 2015, 情報科学技術フォーラム講演論文集, 14(3) (3), 177 - 178, JapaneseH-022 Anomalous Behavior Detection in Videos based on Deformable Part Models
- Forum on Information Technology, 24 Aug. 2015, 情報科学技術フォーラム講演論文集, 14(3) (3), 245 - 246, JapaneseI-022 Three Dimensional NL-Means method for denoising of continuous shooting photography
- Forum on Information Technology, 24 Aug. 2015, 情報科学技術フォーラム講演論文集, 14(3) (3), 179 - 180, JapaneseH-023 Applying Supervised Pre-Training to Network in Network for Precise Image Recognition
- Forum on Information Technology, 24 Aug. 2015, 情報科学技術フォーラム講演論文集, 14(3) (3), 243 - 244, JapaneseI-021 Noise Reduction for Medical Tomographic Images based on Locally Weighted Averaging
- Forum on Information Technology, 24 Aug. 2015, 情報科学技術フォーラム講演論文集, 14(1) (1), 253 - 254, JapaneseC-010 A Hardware Architecture to Perform K-means Clustering for Learning-Based Super-Resolution Combining Self-Learning and Prior-Learning Dictionaries
- Function approximation of visual importance for image quality assessmentThis paper studies the function approximation of visual importance map that can be used for general purposes in image quality assessment. Conventional techniques that estimate the visual importance by eye tracking have many problems such as a loss of time, an enormous effort of a preliminary experiment, and an expensive equipment. Therefore, by analyzing the correlation between SSIM in local areas and subjective evaluation of the image, we estimate the human's gazing area and create the visual importance map. Experimental results have shown the high correlation between subjective evaluation and weighted SSIM based on the visual importance map. The proposed technique can be used widely even if the ROI is unknown.The Institute of Electronics, Information and Communication Engineers, 13 Dec. 2013, 電子情報通信学会技術研究報告 = IEICE technical report : 信学技報, 113(350) (350), 11 - 14, Japanese
- Forum on Information Technology, 20 Aug. 2013, 情報科学技術フォーラム講演論文集, 12(3) (3), 317 - 318, JapaneseI-033 Learning of Geometric Patterns in Example-Based Super-Resolution
- Forum on Information Technology, 20 Aug. 2013, 情報科学技術フォーラム講演論文集, 12(3) (3), 319 - 320, JapaneseI-034 Architecture of Electric Zooming with Super Resolution and Error Feedback
- Forum on Information Technology, 20 Aug. 2013, 情報科学技術フォーラム講演論文集, 12(3) (3), 123 - 124, JapaneseH-015 An Architecture of HOG Based Classifier and Its Application to Pedestrian Detection
- The Institute of Electronics, Information and Communication Engineers, 05 Mar. 2013, Proceedings of the IEICE General Conference, 2013(2) (2), 132 - 132, JapaneseC-12-61 ARELAXATION OSCILLATOR FOR REAL TIME CLOCK WITH LOW REFERENCE VOLTAGE
- The Institute of Electronics, Information and Communication Engineers, 05 Mar. 2013, Proceedings of the IEICE General Conference, 2013(2) (2), 119 - 119, JapaneseC-12-48 Ultra-Low Power and High Speed Rail-to-Rail Operational Amplifier with Adaptive Biasing Technique
- A Study of JPEG Codec with Super-ResolutionThis paper proposes a new JPEG codec in which super-resolution technique.AC coefficients are predicted from DC coefficients by aThe Institute of Electronics, Information and Communication Engineers, 06 Dec. 2012, IEICE technical report. Image engineering, 112(335) (335), 27 - 30, Japanese
- IEICE-INST ELECTRONICS INFORMATION COMMUNICATIONS ENG, Dec. 2012, IEICE TRANSACTIONS ON FUNDAMENTALS OF ELECTRONICS COMMUNICATIONS AND COMPUTER SCIENCES, E95A(12) (12), 2171 - 2171, EnglishSpecial Section on VLSI Design and CAD Algorithms FOREWORDOthers
- A Study of JPEG Codec with Super-ResolutionJPEG コーデックの内部で算出される DC 成分に対して 8×8 倍の超解像拡大を行うことにより, AC 成分を予測・生成する方式を提案する.This paper proposes a new JPEG codec in which AC coefficients are predicted from DC coefficients by a super-resolution technique.29 Nov. 2012, 研究報告オーディオビジュアル複合情報処理(AVM), 2012(6) (6), 1 - 4, Japanese
- Relationship between subjective qualities and SSIM of color imagerThis paper studies a SSIM based-quality assessment for color images. Though SSIM metrics is similar to human subjective evaluation for gray-scale images, it can not evaluate images including degradations in color difference signals because it evaluates only a luminance signal. We incorporate new evaluation terms for the color difference signals into the conventional formula. The weights for them are determined in our experiment subjectively. Experimental results showed that the correlation coefficient between SSIM and subjective evaluation was improved.The Institute of Electronics, Information and Communication Engineers, 05 Oct. 2012, 電子情報通信学会技術研究報告. IMQ, イメージ・メディア・クオリティ : IEICE technical report, 112(234) (234), 7 - 10, Japanese
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(3) (3), 123 - 124, JapaneseH-004 Layout Recognition of Score Ticker on Broadcasted Baseball Games
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(3) (3), 243 - 244, JapaneseI-005 Similar Scene Detection in Broadcasted Videos using Bag-of-Visual Words
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(3) (3), 261 - 262, JapaneseI-011 Architecture of Electronic Zooming with Hierarchical Super Resolution
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(3) (3), 181 - 182, JapaneseH-029 Layout Recognition of Objects and Labels Based on Combination Optimization Algorithm
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(1) (1), 173 - 174, JapaneseB-004 A Technique for GPU-Based Acceleration of Learning-Based Super-Resolution Using Wavelet Transform
- Forum on Information Technology, 04 Sep. 2012, 情報科学技術フォーラム講演論文集, 11(1) (1), 175 - 176, JapaneseB-005 A Technique for GPU-Based Acceleration of Classifier with Weighted Majority Voting for Multimodal Input
- The Institute of Electronics, Information and Communication Engineers, 28 Aug. 2012, Proceedings of the Society Conference of IEICE, 2012(2) (2), 97 - 97, JapaneseC-12-24 A PVT Variation Tolerant Single Slope AD Converter
- The Institute of Electronics, Information and Communication Engineers, 28 Aug. 2012, Proceedings of the Society Conference of IEICE, 2012(2) (2), 96 - 96, JapaneseC-12-23 A High Resolution Offset Calibration Technique for Ultra-Low-Voltage Dynamic Comparator
- The Institute of Electronics, Information and Communication Engineers, 28 Aug. 2012, Proceedings of the Society Conference of IEICE, 2012(2) (2), 91 - 91, JapaneseC-12-18 A CMOS Operational Amplifier with Adaptive Biasing for Ultra Low-power LSIs
- The Institute of Electronics, Information and Communication Engineers, 28 Aug. 2012, Proceedings of the Society Conference of IEICE, 2012(2) (2), 90 - 90, JapaneseC-12-17 A Relaxation Oscillator with Variation Compensation Techniques for Comparator
- A Study of Quality Assessment for Color ImagesThis paper studies a VSNR based-quality assessment for color images. Though VSNR metrics is similar to human subjective evaluation for gray-scale images, it can not evaluate images including degradations in color difference signals because it evaluates only a luminance signal. We incorporate new evaluation terms for the color difference signals into the conventional formula. The weights for them are determined in our experiment subjectively. Experimental results showed that the proposed assessment has high correlation to the human subjective evaluation.The Institute of Electronics, Information and Communication Engineers, 22 Mar. 2012, Technical report of IEICE. PRMU, 111(499) (499), 193 - 198, Japanese
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012(2) (2), 125 - 125, JapaneseC-12-53 Switched-Capacitor DC-DC Converter with Adaptive Bias Current Generating Comparator
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012(2) (2), 121 - 121, JapaneseC-12-49 A Study on Offset Calibration Technique for Ultra-Low-Voltage Dynamic Comparator
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012(2) (2), 124 - 124, JapaneseC-12-52 A Low Voltage Nano-Ampere Current Reference Circuit
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012(2) (2), 126 - 126, JapaneseC-12-54 Boost Converter with Quasi-Continuous-Mode Digital Control
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012(2) (2), 114 - 114, JapaneseC-12-42 High Speed Technique of Ultra-Low Power Operational Amplifier
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012, 19 - 19, JapaneseA-1-19 Load Characteristics Improvement of Charge Pump Circuits for Light Energy Harvesting
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012, 20 - 20, JapaneseA-1-20 Improvement of Efficiency by Reduction in Reverse Current of Differential-Drive CMOS Rectifier
- The Institute of Electronics, Information and Communication Engineers, 06 Mar. 2012, Proceedings of the IEICE General Conference, 2012, 45 - 45, JapaneseA-1-45 Analysis of Reduction in Capacitive DAC for High Resolution SAR ADC
- Smart Dictionary for Learning-Based Super-ResolutionIn this paper, a novel dictionary construction technique for example based super-resolution is proposed. Conventional technique needs enormous number of images to make a dictionary describing pairs of low frequency components and high frequency components. As a result, the dictionary size increases and the search speed decreases. On the other hand, our goal is to maximize the ratio between PSNR and dictionary size. We use only a image to make a very small dictionary with a binary tree structure. Experimental results have shown that the proposed dictionary of only 536 patches can improve PSNR about 1 dB.The Institute of Electronics, Information and Communication Engineers, 11 Nov. 2011, IEICE technical report. Image engineering, 111(284) (284), 35 - 40, Japanese
- Forum on Information Technology, 07 Sep. 2011, 情報科学技術フォーラム講演論文集, 10(3) (3), 337 - 338, JapaneseI-025 Search and generation technique for high-frequency patches in learning-based super-resolution
- Forum on Information Technology, 07 Sep. 2011, 情報科学技術フォーラム講演論文集, 10(3) (3), 123 - 124, JapaneseH-010 Classifier with Weighted Majority Voting for Multimodal Input
- The Institute of Electronics, Information and Communication Engineers, 30 Aug. 2011, Proceedings of the Society Conference of IEICE, 2011(2) (2), 81 - 81, JapaneseC-12-6 Clock Reference Circuit using Compensation Circuit for Comparators
- The Institute of Electronics, Information and Communication Engineers, 30 Aug. 2011, Proceedings of the Society Conference of IEICE, 2011(2) (2), 126 - 126, JapaneseC-12-51 A CMOS Thermal Sensor for Ultra Low-power LSIs
- A Level Shifter with Logic Error Correction Circuit for Low-Voltage Digital LSIsA level shifter circuit capable of extremely low-voltage inputs is presented in this paper. The circuit consists of a level conversion circuit and a logic error correction circuit. The level conversion circuit generates output voltage signal according to the voltage difference between complementary input signals. The logic error correction circuit has a distinctive feature in current generation scheme by detecting input and output logic levels. The proposed circuit can convert low-voltage input digital signals into high-voltage output digital signals. The circuit achieves low-power operation because it dissipates operating current only when the input signals change. Measurement results demonstrated that the circuit can convert low-oltage input signals of 0.4V into 3V output signals. The power dissipation was 58 nW at 0.4-V and 10-kHz input pulse.The Institute of Electronics, Information and Communication Engineers, 14 Jul. 2011, IEICE technical report, 111(151) (151), 1 - 6, Japanese
- A Sense Amplifier with High Speed Pre-Charge Operation for Ultra-Low-Voltage SRAMWe propose a current latch sense amplifier with a current-reuse technique (CLSA-w/CR). The CLSA-w/CR is capable of high-speed pre-charging with little increase in power dissipation. The CLSA-w/CR controls body bias voltages of pre-charge transistors in a conventional CLSA. Even though a forward body bias control over MOSFETs can achieve high-speed operation of the circuit, it induces large substrate leakage current and increases the power dissipation of the circuit. The CLSA-w/CR we propose, however, can achieve high-speed precharging without increasing power dissipation. We evaluated the performance of the CLSA-w/CR using SPICE with a set of 0.35- μm standard CMOS parameters. The pre-charge time decreased by 86.9% and the power dissipation increased by only 8.6% compared to that of a conventional CLSA. The CLSA-w/CR showed high-speed pre-charging with small power overhead.The Institute of Electronics, Information and Communication Engineers, 14 Jul. 2011, IEICE technical report, 111(151) (151), 7 - 12, Japanese
- The Institute of Electronics, Information and Communication Engineers, 28 Feb. 2011, Proceedings of the IEICE General Conference, 2011, 4 - 4, JapaneseA-1-4 High Speed Precharge of Sense Amplifer for Ultra-Low-Voltage SRAM Ciruits
- The Institute of Electronics, Information and Communication Engineers, 28 Feb. 2011, Proceedings of the IEICE General Conference, 2011, 3 - 3, JapaneseA-1-3 A Temperature Characteristics Improvement of Ultra-low Power CMOS Bandgap Voltage Reference Circuit
- The Institute of Electronics, Information and Communication Engineers, 28 Feb. 2011, Proceedings of the IEICE General Conference, 2011, 1 - 1, JapaneseA-1-1 A Power Conversion Interface Circuit Using Thermoelectric Generator
- The Institute of Electronics, Information and Communication Engineers, 28 Feb. 2011, Proceedings of the IEICE General Conference, 2011, 2 - 2, JapaneseA-1-2 Analysis of On-Chip Power Supply Circuit Suitable for Subthreshold LSIs
- The Institute of Electronics, Information and Communication Engineers, 28 Feb. 2011, Proceedings of the IEICE General Conference, 2011(2) (2), 135 - 135, JapaneseC-12-63 Variation Compensation for Precise Nano-Ampere Current Reference
- The Institute of Electronics, Information and Communication Engineers, 2011, Proceedings of the IEICE General Conference, 2, 106 - 106, JapaneseC-12-34 A CMOS Temperature Sensor for Ultra Low-power LSIs
- The Institute of Electronics, Information and Communication Engineers, 31 Aug. 2010, Proceedings of the Society Conference of IEICE, 2010(2) (2), 85 - 85, JapaneseC-12-24 Write-Assist Technique with On-Chip Threshold Voltage Monitoring Circuit for Subthreshold SRAM
- The Institute of Electronics, Information and Communication Engineers, 31 Aug. 2010, Proceedings of the Society Conference of IEICE, 2010(2) (2), 80 - 80, JapaneseC-12-19 Complementary Switched Capacitor DC-DC Power Converter with TFF Circuits
- Forum on Information Technology, 20 Aug. 2010, 情報科学技術フォーラム講演論文集, 9(3) (3), 435 - 436, JapaneseI-068 Dissolve Detection based on Time Variation of Local Histogram
- Forum on Information Technology, 20 Aug. 2010, 情報科学技術フォーラム講演論文集, 9(3) (3), 299 - 300, JapaneseI-026 Learning-based Super-resolution using principal component analysis of wavelet coefficients
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 117 - 117, JapaneseC-12-40 Subthreshold SRAM Cell with Source-Coupled Logic Circuit
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 121 - 121, JapaneseC-12-44 Ultra-Low Current Comparator with Adaptive Biasing Techniques
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 97 - 97, JapaneseC-12-20 A PVT Variation Tolerant Clock Reference Circuit
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 140 - 140, JapaneseC-12-63 Delay Variation Compensation Architecture for Subthreshold CMOS Digital Circuits
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 141 - 141, JapaneseC-12-64 Switched Capacitor DC-DC Power Converter with Duty Control Circuits
- The Institute of Electronics, Information and Communication Engineers, 02 Mar. 2010, Proceedings of the IEICE General Conference, 2010(2) (2), 142 - 142, JapaneseC-12-65 Linear Regulator Circuit for Low-Voltage Subthreshold CMOS LSIs
- An Error Diagnosis Technique Based on Error Locations Extracted from Subcircuit Using Circuit Structure本稿では,回路構造を考慮した修正箇所抽出に基づく論理診断手法を提案する.従来の論理診断手法 EXLLS 法では,処理時間の増加により,5 箇所以上の誤りを同時に修正することができなかった.また,各不一致外部出力を頂点とする部分回路に対する論理診断処理によって,修正箇所を抽出するため,回路全体の修正には不要な箇所を抽出する可能性があった.提案手法では,回路構造を考慮して分割した部分回路から修正箇所候補を抽出する.具体的には,部分回路に対する修正箇所候補集合の生成処理の際に,1) クラスタ単位での組合せ箇所の絞込み処理と,2) 複数の不一致外部出力をまとめた部分回路に対する論理診断処理,を行う.これにより処理時間を短縮し,一度に 6 箇所の設計誤りまでの修正を可能とする.また回路全体の修正には不要な箇所の抽出を抑えることが可能となる.実験結果より,従来手法では修正不可能な回路例のうち,84.4% の回路で修正解が得られるとともに処理時間は最大 1/14 に削減され,提案手法の有効性が確認された.In this paper, we present an error diagnosis technique based on error location extracted from subcircuit using circuit structure. Conventional error diagnosis technique, called EXLLS, cannot rectify five or more errors in a subcircuit at the same time due to increase of processing time. Furthermore, this method can extract useless locations for rectifing the whole circuit due to diagnosis for each error subcicuit. Our technique extracts error locations from subcircut considering circuit structure. Concretely, we propose the two methods in the process of extracting error locations, i) screening error location sets using cluster of elements and ii) extracting error locations for multiple subcircuit which has two or more incorrect primary outputs. Thereby, this method shortens the processing time and can rectify six errors at the same time. Moreover, we can reduce the possibility of extracting locations which are not needed to rectify the whole circuit. Experimental results have shown that the proposed technique rectifies 84.4% circuits which cannot be corrected by conventional one. Furthermore, the processing time has been shortened by 1/14 in the best case.情報処理学会, 25 Nov. 2009, 研究報告システムLSI設計技術(SLDM), 2009(33) (33), 1 - 6, Japanese
- A 4-2 Compressor Using Hybrid-CMOS Logic Style to Reduce Glitches in Low-Power Multiplies本稿では,ハイブリッド型 CMOS 論理構成 4-2 加算器によって,乗算器のグリッチを削減する手法を提案する.従来のグリッチ削減手法では,信号の同期を図る付加回路による面積・消費電力の増加が問題であった.提案する加算器は,多段接続によりオン抵抗が高くなるパス・トランジスタ論理/トランスミッション・ゲートを利用して,付加回路を必要とせずにグリッチを削減する.また,駆動力の高い CMOS 論理を組み合わせ,動作速度の低下を抑制する.シミュレーションの結果,グリッチの動作率を 1/12 に削減できることを確認した.In this paper, we propose a technique to reduce glitches in a multiplier. Conventional techniques using flip-flops for synchronization increase area and power. Our 4-2 compressor using hybrid-CMOS logic style reduces glitches without additional circuits by using pass-transistor logic and transmission-gate which act like a high resistance when they are cascaded. In addition, CMOS inverter reduces speed deterioration. Evaluation results by simulation have shown that the proposed technique reduces glitch activity by 1/12.情報処理学会, 25 Nov. 2009, 研究報告システムLSI設計技術(SLDM), 2009(20) (20), 1 - 6, Japanese
- The Institute of Electronics, Information and Communication Engineers, 04 Mar. 2009, Proceedings of the IEICE General Conference, 2009, 40 - 40, JapaneseA-1-40 Current reference circuit by using temperature characteristics of carrier mobility
- The Institute of Electronics, Information and Communication Engineers, 04 Mar. 2009, Proceedings of the IEICE General Conference, 2009, 42 - 42, JapaneseA-1-42 Process Compensation for Subthreshold Digital Circuits by using Voltage Scaling Techniques
- The Institute of Electronics, Information and Communication Engineers, 04 Mar. 2009, Proceedings of the IEICE General Conference, 2009, 38 - 38, JapaneseA-1-38 A Reverse Current Protection Circuit for On-Chip DC-DC Converter
- The Institute of Electronics, Information and Communication Engineers, 04 Mar. 2009, Proceedings of the IEICE General Conference, 2009, 41 - 41, JapaneseA-1-41 A Voltage Reference Circuit based on Threshold Voltage Difference
- The Institute of Electronics, Information and Communication Engineers, 04 Mar. 2009, Proceedings of the IEICE General Conference, 2009, 39 - 39, JapaneseA-1-39 Switched Capacitor DC-DC Power Converter for Subthreshold CMOS LSIs
- Forum on Information Technology, 20 Aug. 2008, 情報科学技術フォーラム講演論文集, 7(3) (3), 251 - 252, JapaneseI-026 A Super-Resolution Method for Infrared Thermography
- Forum on Information Technology, 20 Aug. 2008, 情報科学技術フォーラム講演論文集, 7(3) (3), 395 - 396, JapaneseI-091 A Speed-up Method for Total Variation-Based Image Denoising
- Forum on Information Technology, 2008, FIT2008, Sep., 99 - 100, JapaneseH-018 An Automatic Video Digesting Technique for Broadcasted Baseball Games
- Forum on Information Technology, 22 Aug. 2007, 情報科学技術フォーラム一般講演論文集, 6(3) (3), 287 - 288, JapaneseI-040 Automatic Calibration of In-Vehicle Camera Attached to Rearview Mirror and Estimation of Driver's Head Position
- Forum on Information Technology, 22 Aug. 2007, 情報科学技術フォーラム一般講演論文集, 6(3) (3), 181 - 182, JapaneseH-076 Topic Segmentation in News Programs Based on Closed Captions
- Forum on Information Technology, 22 Aug. 2007, 情報科学技術フォーラム一般講演論文集, 6(3) (3), 183 - 184, JapaneseH-077 Baseball Video Indexing Based on Closed Captions
- ICI Cancellation Method with Reduced Computational Cost for Mobile Reception of OFDM SignalsOrthogonal frequency division multiplexing (OFDM) modulation is used for Japanese terrestrial digital broadcasting. High speed mobile reception of OFDM signals is seriously hampered by inter-carrier interference (ICI) due to the Doppler shift. In this paper, we propose a method to improve performance of mobile reception by subtracting ICI from OFDM signals. By using a simplified model of the transmission characteristic, we can reduce the computational cost. The simulation results assuming a typical urban area shows improvement of hte maximum moving speed from about 175km/h to about 247km/h when RF Frequency is 800 MHz.The Institute of Electronics, Information and Communication Engineers, 31 Jul. 2007, IEICE technical report, 107(183) (183), 19 - 23, Japanese
- Forum on Information Technology, 21 Aug. 2006, 情報科学技術フォーラム一般講演論文集, 5(3) (3), 469 - 470, JapaneseK_040 A Presentation Support System with Infrared Beam Pointer and Image Processing
- Forum on Information Technology, 21 Aug. 2006, 情報科学技術フォーラム一般講演論文集, 5(2) (2), 445 - 446, JapaneseH_026 Triple Density Error Diffusion for Medical Monochrome LCDs and Improvement of Diffusion Coefficients
- Forum on Information Technology, 21 Aug. 2006, 情報科学技術フォーラム一般講演論文集, 5(3) (3), 295 - 296, JapaneseJ_047 An Adaptive Error Diffusion Mehtod for High Gradation Display Based on Human Visual Sensitivity
- Reduction of Equalizing Circuit Area for 8-VSB Demondulator Using the Result of Correlation OperationSince the 8-VSB system used for terrestrial digital broadcasting system in U.S.A. is weak to multi-path disturbance, an equalizer using filter with many taps for multi-path removal is needed in the 8-VSB demodulator of a receiver. Therefore, the equalizer occupies the largest area in the 8-VSB demodulator. We propose a technique to reduce circuit area for 8-VSB equalizer by allocating multipliers with necessary bit length based on transmission line presumption using the result of correlation operation. The simulation results have shown that both circuit area and power consumption for multipliers are reduced by about 40%.Information Processing Society of Japan (IPSJ), 12 May 2006, 情報処理学会研究報告システムLSI設計技術(SLDM), 2006(41) (41), 61 - 66, Japanese
- Bootstrap Pass-Transistor Logic with Active Body-Biasing Control on PD-SOIWe propose an Active Body-biasing Controlled (ABC)-Bootstrap PTL (Pass-Transistor Logic) on PD-SOI at 0.5 V-V_
- for ultra low power design. Although conventional PTL-based circuits are with difficulty in operation due to lack of driving power as V_
- is scaled down, reduction in junction capacitance with SOI (Silicon On Insulator) contributes to higher operation speed for PTL circuits even at low V_
- . In our approach, applying active body-biasing to Bootstrap PTL, where capacitive coupling between source and body (C_
) improves boosting effect of gate voltage, is the key for higher performance without output voltage loss. Moreover, lowering V_ by body-biasing also brings high speed operation. Experimental results show that ABC-Bootstrap PTL has saved 40% of power consumption when operating at same operation speed as conventional Bootstrap PTL.The Institute of Electronics, Information and Communication Engineers, 16 Dec. 2005, IEICE technical report, 105(476) (476), 31 - 36, Japanese High Performance CMOS Circuit by Using Charge Recycling Actively Body-bias Controlled SOIIn this paper, we propose a new technique in order to achieve speed up without increase in leakage current by using actively body-bias controlling technique. Conventional body-bias controlling techniques have some problems, such as very slow bias controlling operation and large area penalty. To solve this problem, we propose a Charge Recycling Actively Body-bias Controlled (CRABC) circuit on SOI which uses the charge kept in pMOS's body for nMOS's body-bias and controls the body voltage in short transition time using simple additional circuit. According to the SPICE simulation, we have confirmed that CRABC shortens delay time by 20% and controls the body voltage within a few clocks.The Institute of Electronics, Information and Communication Engineers, 16 Dec. 2005, IEICE technical report, 105(476) (476), 37 - 42, JapaneseDriver's Head Tracking Technique with Near-Infrared Pulse Lighting and Stereo CameraIn recent years, image processing technologies to support safe driving are extensively studied. Driver's head tracking is important for such applications as doze monitor, automatic adjustment of headrest, and driver's face recognition. However, it is very difficult to trace the driver's head position due to noisy light condition inside the car. For robust head tracking under such condition, we propose a technique to divide the driver's image from background with a near-infrared pulse lighting. Experimental results for driving in the night, the proposed technique can trace a driver's head position with a mean detection error of 3.78cm.Information Processing Society of Japan (IPSJ), 05 Sep. 2005, 情報処理学会研究報告高度交通システム(ITS), 2005(89) (89), 19 - 23, JapaneseDriver's Head Tracking Technique with Near-Infrared Pulse Lighting and Stereo CameraIn recent years, image processing technologies to support safe driving are extensively studied. Driver's head tracking is important for such applications as doze monitor, automatic adjustment of headrest, and driver's face recognition. However, it is very difficult to trace the driver's head position due to noisy light condition inside the car. For robust head tracking under such condition, we propose a technique to divide the driver's image from background with a near-infrared pulse lighting. Experimental results for driving in the night, the proposed technique can trace a driver's head position with a mean detection error of 3.78cm.The Institute of Electronics, Information and Communication Engineers, 05 Sep. 2005, 電子情報通信学会技術研究報告, 105(259) (259), 19 - 23, JapaneseA Novel Layout Approach Using Dual Supply Voltage Technique on Body-Tied PD-SOIThis paper presents a novel layout approach using dual supply voltage technique. In Placing and Routing (P&R) phase, conventional approaches for dual supply voltages need to separate low supply voltage cells from high voltage ones. Consequently its layout tends to be complex compared with single supply voltage layout. Our layout approach uses cells having two supply voltage rails. Making these cells is difficult in bulk due to increase in area by n-well isolation or in delay by negative body bias caused by sharing n-well. On the other hand, making cells with two supply voltage rails is easy in body-tied PD-SOI owing to trench isolation of each body of transistor. Since our approach for dual supply voltages offers freedom for placement as much as conventional ones for single supply voltage, exsting P&R tools can be used without special operation. Simulation results with MCNC circuits and adders show that our approach reduces power by 23% and 25%, respectively, showing almost the same delay with single supply voltage layout.The Institute of Electronics, Information and Communication Engineers, 01 Dec. 2004, IEICE transactions on fundamentals of electronics, communications and computer sciences, 87(12) (12), 3244 - 3250, EnglishA Technique to Reduce Leakage Power for Clock Gating Scheme on PD-SOIThis paper presents a technique for reducing leakage power of the circuits employing a clock gating scheme on Partially Depleted Silicon On Insulator (PD-SOI). To reduce leakage power while a local clock is disabled, V_of each transistor in Flip-Flops (FFs) and local clock buffers is dynamically controlled by body biasing corresponding to the mode of the local clock. Using PD-SOI is the key to control V_ within one clock cycle by forward biasing and to reduce leakage power without speed degradation. The SPICE simulation results have shown that the proposed technique reduces leakage power by 82% with small area and active power penalty.Information Processing Society of Japan (IPSJ), 15 May 2004, IPSJ journal, 45(5) (5), 1236 - 1243, Japanese Application of Error Diagnosis Technique to Incremental SynthesisIn an LSI design process, Engineering Change Orders (ECO's) are often given even after the layout process. This letter presents an approach to change the design to satisfy the new specification with ECO's by employing an error diagnosis technique. Our approach performs incremental synthesis using spare cells embedded on the original layout. Experimental results show that applying the error diagnosis technique to incremental synthesis is effective to suppress increase in delay time caused by ECO's.The Institute of Electronics, Information and Communication Engineers, 01 Dec. 2003, IEICE Trans. Fundamentals, A, 86(12) (12), 3214 - 3217, EnglishPredictive Coding of Palletized Images Based on Nearness OrderingThis paper presents a predictive coding technique for palletized images based on nearness ordering. Pixels in palletized images such as GIF formatted images with 256 colors are usually represented by index numbers in a color palette. To such images, it is impossible to get high efficient compression by using Lossless JPEG or CALIC because (1) the predictor does not work well for index numbers and (2) prediction errors depend on the order of colors in the palette. We propose a predictive coding with the idea of nearness ordering to overcome these problems. A nearness rank is a value assigned to each color based on the distance from the predicted color in 3-D color space. Our entropy coder encodes not prediction errors between predicted colors and original colors, but the nearness ranks assigned to these original colors. Experimental results of high compression ratios for palletized images, such as logos or dithering pictures, have shown the effectiveness of the proposed technique.Information Processing Society of Japan (IPSJ), 15 Oct. 2002, Transactions of Information Processing Society of Japan, 43(10) (10), 3191 - 3198, JapaneseThe Institute of Electronics, Information and Communication Engineers, 20 Aug. 2002, Proceedings of the Society Conference of IEICE, 2002(2) (2), 40 - 40, JapaneseFourier Transform for Analyzing Light Emission Pattern on Digital DisplayThe Institute of Electronics, Information and Communication Engineers, 20 Aug. 2002, Proceedings of the Society Conference of IEICE, 2002(2) (2), 41 - 41, JapaneseAn Evaluation Technique for Subfield Method on Digital DisplayThe Institute of Electronics, Information and Communication Engineers, 20 Aug. 2002, Proceedings of the Society Conference of IEICE, 2002(2) (2), 42 - 42, JapaneseAn Evaluation Technique for Error Diffusion on Digital DisplaySub - Band Video Coding with Motion Compensation and Its Hardware ImplementationWe propose a novel sub-band video coding technique based on wavelet transform with motion compensation employing prediction of motion vectors for the higher sub-bands based on those in the lowest sub-band. Correlation between motion vectors for sub-bands is successfully used to shorten the processing time as well as the total code length. Experimental results using software implementation have shown 25% shorter processing time than the conventional full search method. Furthermore, we have implemented the video encoder including the proposed technique, called DVC-W (Digital Video Codec based on Wavelet transform), by hardware using FPGA's and memories. The clock frequency needed for real-time processing has been reduced to 78% by the proposed technique.Information Processing Society of Japan (IPSJ), 23 May 2002, 情報処理学会研究報告システムLSI設計技術(SLDM), 2002(46) (46), 79 - 84, JapaneseSub-Band Video Coding with Motion Compensation and Its Hardware ImplementationWe propose a novel sub-band video coding technique based on wavelet transform with motion compensation employing prediction of motion vectors for the higher sub-bands based on those in the lowest sub-band. Correlation between motion vectors for sub-bands is successfully used to shorten the processing time as well as the total code length. Experimental results using software implementation have shown 25% shorter processing time than the conventional full search method. Furthermore, we have implemented the video encoder including the proposed technique, called DVC-W (Digital Video Codec based on Wavelet transform), by hardware using FPGA's and memories. The clock frequency needed for real-time processing has been reduced to 78% by the proposed technique.The Institute of Electronics, Information and Communication Engineers, 17 May 2002, Technical report of IEICE. VLD, 102(73) (73), 37 - 42, JapaneseSynthesis and Layout of Circuits Combining CMOS/Pass Transistor LogicWe present an improved synthesis method for low power circuits combining CMOS and pass transistor logic (PTL) based on the previous method using decomposition graphs obtained as the result of simple disjunctive decomposition. The proposed method introduces a few techniques for sharing larger part of sub-circuits in a multi-output circuit. In addition, we have developed a standard cell library to evaluate our method based on the layout results using commercial layout tools. This cell library have been applied to the layout design of benchmark circuits, and we have evaluated the results. As the result, power dissipation has been reduced by 48% compared to CMOS, and by 7% to PTL, and by 7% to the previous method in average for 16 circuits.Information Processing Society of Japan (IPSJ), 15 May 2002, Transactions of Information Processing Society of Japan, 43(5) (5), 1357 - 1360, Japanese2002, J. Inf. Process. Soc. Jpn., 43(5) (5), 1252 - 1259An LUT-based multiple error diagnosis technique using symbolic simulation with truth variablesAn Error Diagnosis Technique for LUT-Based FPGA Designs Combining Pattern-Based Technique and BDD-Based Formal Technique本論文では, LUT型FPGAで実現された組合せ回路に含まれる多重設計誤りの修正を行うEXL法を提案する.本手法では, 誤り追跡入力と呼ばれるパターンに基づく処理と, BDDに基づく論理関数処理を組み合わせている.パターンに基づく処理では, 従来のゲート回路を対象とする拡張X-伝搬法と同様に, 考慮すべき組合せ箇所数を大幅に削減することを目的とする.一方, 論理関数処理においては, 残存する各組合せ箇所について, LUT内部の機能を正しく決定することを目的とする.これら2種類の手法を併用することにより, 現実的な処理時間で、100%の限定率が達成された.The Institute of Electronics, Information and Communication Engineers, 01 Oct. 2001, The Transactions of the Institute of Electronics,Information and Communication Engineers., 84(10) (10), 1474 - 1483, JapaneseSynthesis of Low Power Circuits Combining CMOS/Pass Transistor LogicLogic functions can be implemented with fewer transistors based on the pass transistor logic (PTL) than on the static CMOS logic in many cases, but not always. For simple functions such as (N) OR and (N) AND, static CMOS logic circuits can often be implemented with fewer transistors than PTL. In order to reduce transistor counts for lower power dissipation, we propose a method to synthesize logic circuits combining CMOS and PTL based on the decomposition graph obtained as the result of simple disjunctive decomposition for a given logic function. Based on the decomposition graph, we implement simple functions with CMOS logic. On the other hand, we implement the other functions with PTL based on sliced BDD (Binary Decision Diagram) to reduce buffer counts. On a set of 40 MCNC benchmarks,our method has synthesized circuits with lower power dissipation by 27% than area-oriented CMOS, and by 12% than SPL.Information Processing Society of Japan (IPSJ), 15 Apr. 2001, Transactions of Information Processing Society of Japan, 42(4) (4), 967 - 974, Japanese電気学会, 01 Nov. 2000, The Transactions of the Institute of Electrical Engineers of Japan. C, 120(11) (11), 1637 - 1643, JapaneseA High-Level Synthesis System for Reconfigurable Machine : RM-V電気学会, 01 Nov. 2000, The Transactions of the Institute of Electrical Engineers of Japan. C, 120(11) (11), 1622 - 1628, JapaneseFast Dithering Technique for MPEG Viewer with A 256-Color Mode電気学会, 01 Nov. 2000, The Transactions of the Institute of Electrical Engineers of Japan. C, 120(11) (11), 1629 - 1636, JapaneseReconfigurable Machine:RM-V and Its ApplicationsA High - Level Synthesis System for Reconfigurable Machine : RM - VThis paper presents a high-levelsynthesis system, called RMAC-V (Reconfigurable Machine Application Compiler for RM-V), for applications using SDRAMs implemented on the flexible architecture of RM-V(Reconfigurable Machine-V)combining FPGAs and memories.Given an application program written in the C language, RMAC-V produces an RT-level hardware description in VHDL. To reduce the clock counts needed to access memories, RMAC-V introduces two techniques: multi-clock scheduling and preloading row address. Experimental results on Wavelet Transform Engine (WTE) have shown 33 % fewer total clock counts than those with conventional method.Information Processing Society of Japan (IPSJ), 11 May 2000, 情報処理学会研究報告システムLSI設計技術(SLDM), 2000(37) (37), 41 - 47, JapaneseAn Error Diagnosis Technique for LUT - Based FPGA Designs Combining Pattern - Based Technique and BDD - Based Formal TechniqueThis paper presents an approach to rectify multiple logic design errors in LUT-based FPGA designs. This approach, called EXL-algorithm, combines two kinds of techniques:a pattern-based technique for locating errors like in the EXM-algorithm, and a BDD-based formal technique to fix LUT function at each location. This combination allows the EXL-algorithm to recitfy errors of LUT functions within practical processing time at 100 % hit ratio.Information Processing Society of Japan (IPSJ), 11 May 2000, 情報処理学会研究報告システムLSI設計技術(SLDM), 2000(37) (37), 49 - 56, JapaneseReconfigurable Machine : RM - V and Its ApplicationsThis paper presents Reconfigurable Machine:RM-V developed to accelerate a wide range of applications on the flexibie hardware architecture combining FPGAs and memories.RM-V consists of larger scale FPGAs, SRAMs, and SDRAMs offering×6.8 gete capacity and×170 memory capacity compared to the former prototype:RM-IV.RM-V offers higher flexibility and scality by using application specific base-board on which one to four mobule-boards are mountsd.Experimental results with image processing applications have shown that RM-V works at about×10 to ×30processing speed compared to software processing.Information Processing Society of Japan (IPSJ), 11 May 2000, 情報処理学会研究報告システムLSI設計技術(SLDM), 2000(37) (37), 33 - 39, JapaneseReconfigurable Machine : RM-V and Its ApplicationsThis paper presents Reconfigurable Machine:RM-V developed to accelerate a wide range of applications on the flexible hardware architecture combining FPGAs and memories. RM-V consists of larger scale FPGAs, SRAMs, and SDRAMs offering ×6.8 gate capacity and ×170 memory capacity compared to the former prototype:RM-IV. RM-V offers higher flexibility and scalability by using application specific base-board on which one to four module-boards are mounted. Experimental results with image processing applications have shown that RM-V works at about ×10 to ×30 processing speed compared to software processing.The Institute of Electronics, Information and Communication Engineers, 05 May 2000, Technical report of IEICE. VLD, 100(36) (36), 9 - 15, JapaneseAn Error Diagnosis Technique for LUT-Based FPGA Designs Combining Pattern-Based Technique and BDD-Based Formal TechniqueThis paper presents an approach to rectify multiple logic design errors in LUT-based FPGA designs. This approach, called EXL-algorithm, combines two kinds of techniques:a pattern-based technique for locating errors like in the EXM-algorithm, and a BDD-based formal technique to fix LUT function at each location. This combination allows the EXL-algorithm to rectify errors of LUT functions within practical processing time at 100 % hit ratio.The Institute of Electronics, Information and Communication Engineers, 05 May 2000, Technical report of IEICE. VLD, 100(36) (36), 25 - 32, JapaneseA High-Level Synthesis System for Reconfigurable Machine : RM-VThis paper presents a high-level synthesis system, called RMAC-V(Reconfigurable Machine Application Compiler for RM-V), for applications using SDRAMs implemented on the flexible architecture of RM-V(Reconfigurable Machine-V)combining FPGAs and memories. Given an application program written in the C language, RMAC-V produces an RT-level hardware description in VHDL. To reduce the clock counts needed to access memories, RMAC-V introduces two techniques:multi-clock scheduling and preloading row address. Experimental results on Wavelet Transform Engine(WTE)have shown 33 % fewer total clock counts than those with conventional method.The Institute of Electronics, Information and Communication Engineers, 05 May 2000, Technical report of IEICE. VLD, 100(36) (36), 17 - 23, JapaneseA Logic Diagnosis Technique Improved in the Number of Rectifiable Logic Design ErrorsRectification of four or more design errors in a combinational circuit based on the EXM-algorithm, an existing algorithm for logic diagnosis, has been difficult due to processing time. This paper presents a logic diagnosis technique applicable to four or more design errors employing iterative diagnosis procedure for subcircuits extracted based on the correctness of primary output functions. By handling the subcircuits, the proposed algorithm reduces both the number of gates and the number of logic design errors to be considered at once for logic diagnosis. Experimental results demonstrate that most of circuits including four or more design errors can be rectified within shorter processing time.Information Processing Society of Japan (IPSJ), 15 Apr. 2000, Transactions of Information Processing Society of Japan, 41(4) (4), 970 - 973, JapaneseKobe University, Nov. 1999, Memoirs of the Faculty of Engineering, Kobe University, 46, 69 - 79, EnglishThree-Dimensional Prediction for Lossless Coding of Digital RGB ImageSynthesis of Pass Transistor Logic Circuits Based on Sliced BDDIn case of using BDD (Binary Decision Diagram) to synthesize pass transistor logic circuits, the circuit delay and the number of intermediate buffers increase according to the number of BDD stages, which is proportional to the number of primary inputs. We propose a synthesis technique for pass transistor logic based on sliced BDD, which is able to reduce the number of BDD stages, the circuit delay, and the number of transistors.Information Processing Society of Japan (IPSJ), 15 Apr. 1999, Transactions of Information Processing Society of Japan, 40(4) (4), 1557 - 1564, JapaneseLayered Blind Deconvolution with Interband Prediction画像復元問題の一解法として, 帯域間予測を用いた階層的ブラインドデコンボリューションを提案する.従来の階層的ブラインドデコンボリューションでは, 帯域分割後の高域成分の復元が困難であった.そこで本論文では, 低域成分の復元結果から帯域間予測を用いて高域成分を予測し, これらの合成結果を次の階層の初期画像とすることで復元画像の品質向上を図る手法を提案する.提案手法および従来手法による復元能力の比較実験の結果, 帯域間予測の有効性を確認した.The Institute of Electronics, Information and Communication Engineers, Dec. 1998, The Transactions of the Institute of Electronics,Information and Communication Engineers., 81(12) (12), 2712 - 2717, JapaneseKobe University, 23 Jan. 1998, Memoirs of the Faculty of Engineering, Kobe University, 44, 77 - 85, EnglishA Reconfigurable Machine : RM-III and Its ApplicationsA Diagnosis Method for Single Logic Design Errors in Gate Level Combinational Circuits本論文では,ゲートレベルの組合せ回路に対する論理設計誤りの診断手法を提案し,更にその誤りを修正する方法について考察する.本手法では,論理設計誤りをゲートレベルでモデル化して考え,診断手法としては,多重縮退故障のテスト生成に用いられるベクトルペア解析を利用する.論理設計誤りが原因で生じる信号値を縮退故障が原因で生じる信号値に対応させることにより,ベクトルペア解析を応用した誤り診断が可能となる.ベクトルペア解析を用いた診断の結果は,正常回路への修正方法の指針をも与える.但し,信号線欠落による誤りに対しては,ベクトルペア解析では十分診断できず,テストベクトルに対するゲート入力の制御値の影響を考慮することで診断可能となる.また,誤りの可能性がある領域をより絞るための手法を提案する.更に,ISCAS'85のべンチマーク回路に対する実験結果により,本手法の単一論理設計誤りに対する有効性を示す.The Institute of Electronics, Information and Communication Engineers, 25 Dec. 1996, The Transactions of the Institute of Electronics,Information and Communication Engineers., 79(12) (12), 1009 - 1016, JapaneseReconfigurable Machines : RM-I to RM-IV and Their ApplicationsConventional speed-up techniques for CAD algorithms using special-purpose engines based on wired-logic, microprogrammed engines, or general purpose parallel machines could not achieve high performance and high flexibility at the same time. This paper surveys Reconfigurable Machlnes: RM-I, -II, -III, and -IV capable of efficiently implementing a wide range of computationally complex algorithms on its flexible architecture combining reconfigurable FPGA's and memories. Their "gate-level programmability" allows us to implement various kinds of algorithms in wired-logic. Reconfigurable Machines have been applied to CAD applications including logic simulation and logic diagnosis, image processing like Wavelet transform and blind deconvolution, and systolic algorithm for matrix multiplication. The results have shown their high performance comparable to special-purpose engines as well as their high flexibility.The Institute of Electronics, Information and Communication Engineers, 13 Dec. 1996, Technical report of IEICE. VLD, 96(425) (425), 119 - 126, JapaneseLogic Diagnosis Method Applicable to Extra-and Missing-gate errors論理回路の大規模化,複雑化に伴い,論理回路の自動設計が必要不可欠となっている。しかし,回路規模や性能に対する要求が厳しい場合は,人手設計に頼らざるを得ない。人手の加わった部分については,論理検証が不可欠であり,誤りの存在が確認された際の誤り追跡・修正の自動化が求められる。そこで本稿では,論理診断手法としてすでに提案されている拡張X-伝搬法において,その処理の煩雑さから従来対応していなかったゲート素子の過剰と欠落の二つの誤りに対応する手法を提案する。網羅的な処理を可能な限り回避しながら,検出率の向上を目指した。04 Sep. 1996, 全国大会講演論文集, 53, 31 - 32, JapaneseImage Coding Based on Subband DCTDCTによる画像符号化手法の問題点として、演算量の多さやブロック歪みの発生が挙げられる。これらの問題点を解決するために、DCTの高速アルゴリズムやサブバンド分割手法が提案されてきたが、それらの研究は個別に行われてきた。しかしDCTの高速アルゴリズムは実はサブバンド分割と密接な関係がある。本稿では両者の関係について述べた後、サブバンドDCTを用いた符号化手法を提案するJPEG方式との比較の結果,低ビットレートの符号化の際に良好な結果を得たので報告する。04 Sep. 1996, 全国大会講演論文集, 53, 351 - 352, JapaneseA supporting system for education/research through computer communicationAn supporting system for education/research through computer communication is developed. This system provides a client-server database of academic information with multimedia feature on a personal computer. A client machine can access to the server through a computer network or a telephone line. Four types of information are include : "General introduction", "Education and research", "Social service" and "Communication salon". Users can access to those corners through a comfortable graphical interface. The experimental test confirms that even the beginner can use this system easily.The Institute of Electronics, Information and Communication Engineers, 22 Jul. 1995, IEICE technical report. Education technology, 95(176) (176), 91 - 96, JapaneseHAAR WAVELET TRANSFORM WITH INTERBAND PREDICTION AND ITS APPLICATION TO IMAGE-CODINGAlthough the discrete cosine transform (DCT) and wavelet transform have been used as effective techniques for reducing the redundancy of image waveforms, they have the problems of high complexity and causing block distortion. Tn this paper, a Haar wavelet transform with interband prediction is proposed that permits high-speed processing and which is suitable for coding as a subband decomposition technique since it generates little block distortion in the decoded images. The interband prediction method of this proposed transform method uses the derivative of the low-band waveform to predict the high-band waveform each time a band is split into two subbands. This results in a transform process that gives a prediction residual signal with lower entropy. During the inverse transform, the prediction coefficients obtained from the forward transform are used to predict the high-frequency waveforms and then, by adding the prediction residual, the original high frequency waveforms are reconstructed. Because the high-frequency waveforms are generated that smoothly interpolate the up-sampled, low-frequency waveforms, any block effects from this prediction technique are difficult to see in the decoded image. A detailed analysis of the proposed interband prediction process is performed by interpreting the proposed transform as a subband decomposition process that is based on the use of a symmetric short-kernel filter (SSKF) filter bank; then experiments are conducted that demonstrate its performance as a subband decomposition for coding of real image data and the possibility of progressive build-up of the decoded images. Results show that this transform method is effective for coding image data.SCRIPTA TECHNICA PUBL, Apr. 1995, ELECTRONICS AND COMMUNICATIONS IN JAPAN PART III-FUNDAMENTAL ELECTRONIC SCIENCE, 78(4) (4), 103 - 114, EnglishOn Diagnosing Logic Design Errors Using the Vector Pair AnalysisIn this paper we propose a method for diagnosing and rectifying logic design errors in the gate-level combinational circuits. This method employs the vector pair analysis that is developed for detection and diagnosis of multiple stuck-at faults. In this analysis, signal values which are caused by stuck-at faults are regarded as signal values which are caused by logic design errors. How to rectify the design errors is also indicated as the result of the analysis. Experimental results for ISCAS'85 benchmark circuits show the effectiveness of this method for single errors.The Institute of Electronics, Information and Communication Engineers, 1995, Technical report of IEICE. FTS, FTC95 - 28, JapaneseHaar Wavelet Transform with Inter Band Prediction and Its Application to Image Coding離散コサイン変換(DCT)やウェーブレット変換は画像信号の冗長抑圧に有効な手法として利用されているが,処理の複雑さやブロックひずみの発生が問題となっている.そこで本論文では,高速処理が可能であり,符号化に適し,かつブロックひずみの少ない再生画像が得られる帯域分割手法として,帯域間予測を用いたハール・ウェーブレット変換を提案する.本変換手法で用いる帯域間予測とは,帯域を2分割するたびに低域信号のこう配から高域信号を予測し,それをよりエントロピーの低い補正信号に変換する処理である.逆変換の際は正変換の際と同じ予測係数を用いて高域信号を予測し,これに補正信号を加算することによってもとの高域信号を再構成する.この予測処理ではアップサンプリングされた低域信号を滑らかに補間するような高域信号を生成するため,再生画像にブロックひずみが現れにくくなる.本論文では提案する帯域間予測処理をSSKFバンクを用いたサブバンド分割の考え方に基づいて詳しく解析した後に,本変換手法を用いた実画像データの帯域分割と符号化,プログレッシブビルドアップによる再生の実験を行い,本変換手法が画像データの符号化に有効であることを示す.The Institute of Electronics, Information and Communication Engineers, 01 Dec. 1994, The Transactions of the Institute of Electronics,Information and Communication Engineers. A, 77(12) (12), 1738 - 1746, JapaneseReconfigurable Machine and Its Application to Rectification of Logic Design ErrorsThis paper presents a Reconfigurable Machine (RM), capable of efficiently implementing a wide range of computationally complex algorithms. Its highly flexible architecture combining re-programmable FPGA's with RAM's supports a wide range of applications. Since its "gate-level programmability" allows us to implement various kinds of parallel processing techniques, RM provides a performance comparable to existing "special-purpose" engines for LSI CAD. The dynamic recongifuration capability of FPGA's is used to reload several kinds of configuration data while power is applied to them. Thus, RM behaves itself like a general-purpose computer applicable to various kinds of applications by loading programs. A Reconfigurable Machine prototype, called RM-I, has been built as the first prototype incorporating five FPGA's and four SRAM memory banks. RM-I has been applied to logic diagnosis, which locates logic design errors in gate-level combinational circuits. Two kinds of locating processes have been implemented on a Logic Diagnosis Engine (LDE) employing RM-I as a hardware platform. LDE has achieved the processing speeds 35 to 50 times as fast as that on a 15 MIPS computer. The concept of RM is one of the best solution to the trade-offs between general-purpose machines and special-purpose ones.Information Processing Society of Japan (IPSJ), 15 Nov. 1994, IPSJ Journal, 35(11) (11), 2488 - 2499, JapaneseA Reconfigurable Machine Based on Flexible InterconnectionThis paper presents a Reconfigurable Machine-III(RM-111)based on the concept of Reconfigurable Machine,capable of efficiently implementing a wide range of computationally complex algorithms on its flexible architecture combining FPGAs and memories.RM-111 has been built to provide higher flexibility and,larger capacity than the previous prototypes:RM-1 and RM11.RM-111 incorporates 4 FPIC′s to provide flexible interconnection between FPGAs and memories, where we can implement a variety of data-path architectures.RM-111 has been applied to a logic simulator and a matrix multiplier,and has shown higher flexibility than RM-11 without degritdation in the performance.The Institute of Electronics, Information and Communication Engineers, 22 Sep. 1994, IEICE technical report. Computer systems, 94(257) (257), 33 - 40, JapaneseInformation Processing Society of Japan (IPSJ), 15 Jun. 1994, IPSJ Magazine, 35(6) (6), 511 - 518, JapaneseFPGA-based Architectures and System Design Approaches
■ Lectures, oral presentations, etc.- 電子情報通信学会 ICD/CAS研究会 学生・若手研究会, Dec. 2019, Japaneseリアルタイムクロックに向けた超低消費電力32 kHz水晶発振回路
- 電子情報通信学会 ICD/CAS研究会 学生・若手研究会, Dec. 2019, Japanese低電圧エネルギーハーベスティングシステムに向けた超低消費電力電圧モニタ回路Oral presentation
- 電子情報通信学会 ICD/CAS研究会 学生・若手研究会, Dec. 2019, Japaneseワイヤレス給電システムの位置自由度を改善するパワーマネジメント回路に関する研究Oral presentation
- 令和元年電気関係学会関西連合大会, Dec. 2019, Japanese畳み込みニューラルネットワークを用いたアスファルトのひび割れ検出と画像の自動スケール判断Oral presentation
- 第18回情報科学技術フォーラム(FIT2019), Sep. 2019, JapaneseVGGとU-Netを組み合わせたニューラルネットワークによるグレースケール画像の自動着色
- 第18回情報科学技術フォーラム(FIT2019), Sep. 2019, JapaneseCNNを用いた近赤外線画像のセグメンテーションとカラリゼーション
- 第18回情報科学技術フォーラム(FIT2019), Sep. 2019, JapaneseSkip-ConnectionとSeparable畳み込みを用いたCNNによる画像の単眼深度推定
- 第18回情報科学技術フォーラム(FIT2019), Sep. 2019, Japanese分岐構造のCNNによる高速な多クラス分類システムに関する研究
- 第18回情報科学技術フォーラム(FIT2019), Sep. 2019, JapaneseCNNのハードウェア実装における全結合層のリソース削減手法に関する一検討Oral presentation
- 第32回 回路とシステムワークショップ, Aug. 2019, Japanese極低電圧エネルギーハーベスティングに向けたスイッチトキャパシタ型昇圧コンバータ
- LSIとシステムのワークショップ2019, May 2019, Japanese超低消費電力で動作するアクティブダイオードの設計Oral presentation
- 第17回情報科学技術フォーラム, Sep. 2018, Japanese, 電子情報通信学会,情報処理学会, Domestic conference論理再合成における遅延時間抑制に有効なRECONスペアセルの概略配置手法Oral presentation
- 第17回情報科学技術フォーラム, Sep. 2018, Japanese, 電子情報通信学会,情報処理学会, Domestic conference誤り追跡入力の追加生成に基づく論理診断処理の効率化Oral presentation
- 第17回情報科学技術フォーラム, Sep. 2018, Japanese, 電子情報通信学会,情報処理学会, Domestic conferenceセグメンテーションを組み合わせたDCGANによる画像の自動生成Oral presentation
- 第17回情報科学技術フォーラム, Sep. 2018, Japanese, 電子情報通信学会,情報処理学会, Domestic conferenceCNNハードウェアにおけるDRAMアクセス量削減手法Oral presentation
- 第17回情報科学技術フォーラム, Sep. 2018, Japanese, 電子情報通信学会,情報処理学会, Domestic conference4CH出力CNNを用いた超解像処理のハードウェア化Oral presentation
- LSIとシステムのワークショップ2018, May 2018, Japanese, 電子情報通信学会集積回路研究専門委員会, Domestic conference低電圧・微弱環境エネルギー利用に向けたパワーマネジメントシステムPoster presentation
- 第31回 回路とシステムワークショップ, May 2018, Japanese, 電子情報通信学会, Domestic conference最大効率点追従制御を用いたスイッチトキャパシタ型降圧コンバータの高効率化Oral presentation
- 第31回 回路とシステムワークショップ, May 2018, Japanese, 電子情報通信学会, Domestic conference過電流制御技術を用いた自己バイアス型シリーズレギュレータOral presentation
- 第31回 回路とシステムワークショップ, May 2018, Japanese, 電子情報通信学会, Domestic conferenceアクティブダイオードに向けたヒステリシスコンパレータの設計Oral presentation
- IEEE EDS Kansai Chapter, The 17th Kansai Colloquium Electron Devices Workshop, Jan. 2018, Japanese, The Institute of Electrical and Electronics Engineers, Domestic conferenceA self-biased low-dropout linear regulator for ultra-low power battery management[Invited]Invited oral presentation
- 電子情報通信学会 集積回路研究専門委員会 学生・若手研究会, Dec. 2017, Japanese, 電子情報通信学会集積回路研究専門委員会, Domestic conference時間計測アプリケーションに向けた抵抗レスで面積利用効率の高い超低電力フルオンチップ弛張発振回路Oral presentation
- 平成29年度VDECデザイナーズフォーラム, Sep. 2017, Japanese, 東京大学大規模集積システム設計教育研究センター, Domestic conference超低消費電力32-kHzリアルタイムクロック生成回路Oral presentation
- 第16回情報科学技術フォーラム, Sep. 2017, Japanese, 電子情報通信学会,情報処理学会, Domestic conference畳み込みニューラルネットワークを用いた赤外線画像のカラー化Oral presentation
- 第16回情報科学技術フォーラム, Sep. 2017, Japanese, 電子情報通信学会,情報処理学会, Domestic conference畳み込みニューラルネットワークと生成型学習法を用いたコンクリートのひび割れ抽出Oral presentation
- LSIとシステムのワークショップ2017, May 2017, Japanese, 電子情報通信学会集積回路研究専門委員会, Domestic conference極低入力電圧エネルギーハーベスティングに向けた昇圧コンバータの設計Poster presentation
- LSIとシステムのワークショップ2017, May 2017, Japanese, 電子情報通信学会集積回路研究専門委員会, Domestic conferenceリアルタイムクロックに向けた電流比較型超低電力フルオンチップRC発振器Poster presentation
- 電子情報通信学会 集積回路研究専門委員会 集積回路研究会, Jan. 2017, Japanese, 電子情報通信学会集積回路研究専門委員会, みやじま杜の宿, Domestic conference時間計測アプリケーションに向けた超低電力フルオンチップ電流比較型RC発振器Oral presentation
- 電子情報通信学会 集積回路研究専門委員会 集積回路研究会 学生・若手研究会, Dec. 2016, Japanese, 電子情報通信学会集積回路研究専門委員会, 東京工業大学, Domestic conference適応バイアス技術を用いた低電流・高速スイッチトキャパシタ型増幅回路Poster presentation
- 電子情報通信学会 集積回路研究専門委員会 集積回路研究会 学生・若手研究会, Dec. 2016, Japanese, 電子情報通信学会集積回路研究専門委員会, 東京工業大学, Domestic conference超低電力・環境発電デバイスに向けた最大発電量予測システムPoster presentation
- 第15回情報科学技術フォーラム(FIT2016), Sep. 2016, Japanese, Domestic conference畳み込みニューラルネットワークを用いたモノクロ画像のカラリゼーションOral presentation
- 電子情報通信学会 リコンフィギャラブルシステム研究会, Sep. 2016, Japanese, Domestic conference近似を導入した簡略化アルゴリズムに基づくRNN回路のリソース削減と高効率化Oral presentation
- 第15回情報科学技術フォーラム(FIT2016), Sep. 2016, Japanese, Domestic conferenceぶれ画像復元のためのPSF推定に関する研究Oral presentation
- 第15回情報科学技術フォーラム(FIT2016), Sep. 2016, Japanese, Domestic conferenceハードウェア化に適した近似関数の導入によるRNN回路のリソース削減と低消費電力化Oral presentation
- 第15回情報科学技術フォーラム(FIT2016), Sep. 2016, Japanese, Domestic conferenceSIFT特徴点を用いたPoint Cloudの位置合わせ手法に関する研究Oral presentation
- 電子情報通信学会 集積回路研究専門委員会 集積回路研究会, Aug. 2016, Japanese, 電子情報通信学会集積回路研究専門委員会, 中央電気倶楽部, Domestic conference高速起動を特徴とした間欠動作型VLSIシステム用32-MHzオンチップクロック源回路Oral presentation
- 平成28年度VDECデザイナーズフォーラム, Aug. 2016, Japanese, 東京大学大規模集積システム設計教育研究センター, 東京大学大規模集積システム設計教育研究センター, Domestic conference1マイクロ秒以内の高速起動を特徴とする高精度32-MHz弛張発振器Oral presentation
- LSIとシステムのワークショップ2016, May 2016, Japanese, 電子情報通信学会集積回路研究専門委員会, 東京大学, Domestic conference間欠動作型VLSIシステムに向けた高速起動可能な32-MHzフルオンチップ弛張発振器Poster presentation
- 第14回情報科学技術フォーラム, Sep. 2015, Japanese, 情報処理学会, 愛媛, Domestic conference連写画像におけるノイズ除去のための三次元NL-Means法Oral presentation
- 第14回情報科学技術フォーラム, Sep. 2015, Japanese, 情報処理学会, 愛媛, Domestic conference自己学習型超解像に適用するK-meansクラスタリング処理のハードウェアによる実現Oral presentation
- 第14回情報科学技術フォーラム, Sep. 2015, Japanese, 情報処理学会, 愛媛, Domestic conference事前教師あり学習を適用したNetwork in Networkによる画像認識の高精度化Oral presentation
- 第14回情報科学技術フォーラム, Sep. 2015, Japanese, 情報処理学会, 愛媛, Domestic conference局所的加重平均を用いた医用断層画像のノイズ除去手法Oral presentation
- 第14回情報科学技術フォーラム, Sep. 2015, Japanese, 情報処理学会, 愛媛, Domestic conferenceDeformable Part Modelsによる映像中の異常行動検出Oral presentation
- 平成27年度 VDECデザイナーズフォーラム, Aug. 2015, Japanese, 東京大学大規模集積システム設計教育研究センター, 石川, Domestic conference幅広い電圧レベル変換を実現する低消費電力レベルシフタOral presentation
- 平成27年度 VDECデザイナーズフォーラム, Aug. 2015, Japanese, 東京大学大規模集積システム設計教育研究センター, 石川, Domestic conference低電圧入力で動作するマイクロ環境発電のための高効率3端子昇圧コンバータOral presentation
- 第41回アナログRF研究会, Jul. 2015, Japanese, 電子情報通信学会, 屋久島, Domestic conference振動エネルギーを用いた環境発電のための超低電力・適応バイアス型シリーズレギュレータPoster presentation
- LSIとシステムのワークショップ2015, May 2015, Japanese, 電子情報通信学会, 北九州, Domestic conference低電圧エネルギー・ハーベスティングに向けた高効率3端子昇圧コンバータPoster presentation
- 電子情報通信学会 集積回路研究専門委員会 アナログRF研究会, Jul. 2014, Japanese, 電子情報通信学会, 屋久島町, Domestic conference逐次比較AD コンバータに向けたコンパレータのオフセット補正アーキテクチャPoster presentation
- 電子情報通信学会技術研究報告, Dec. 2013, Japanese, 電子情報通信学会, 浜松市, Domestic conference画質評価のための注視重要度の関数近似Oral presentation
- 第12回情報科学技術フォーラム(FIT2013), Sep. 2013, Japanese, 情報処理学会, 鳥取市, Domestic conference超解像と誤差帰還を用いた電子ズームの構成方法Oral presentation
- 第12回情報科学技術フォーラム(FIT2013), Sep. 2013, Japanese, 情報処理学会, 鳥取市, Domestic conference事例参照型超解像における幾何学模様の学習Oral presentation
- 第12回情報科学技術フォーラム(FIT2013), Sep. 2013, Japanese, 情報処理学会, 鳥取市, Domestic conferenceHOGを用いた識別器の構成方法と歩行者検出への応用Oral presentation
- 第26回 回路とシステムワークショップ, Aug. 2013, Japanese, 電子情報通信学会, 淡路市, Domestic conference低電圧エネルギー・ハーベスティングに向けた0.27-V入力,効率75%,オンチップ・チャージポンプ回路Oral presentation
- LSIとシステムのワークショップ2013, May 2013, Japanese, 電子情報通信学会集積回路研究専門委員会, 北九州市, Domestic conference適応バイアス電流生成技術を用いた超低電力・高速Rail-to-RailオペアンプPoster presentation
- LSIとシステムのワークショップ2013, May 2013, Japanese, 電子情報通信学会集積回路研究専門委員会, 北九州市, Domestic conferenceばらつき補正技術を用いたシングルスロープADコンバータPoster presentation
- 電子情報通信学会 総合大会, Mar. 2013, Japanese, 電子情報通信学会, 岐阜, Domestic conference適応バイアス技術を用いた超低電力・高速Rail-to-RailオペアンプOral presentation
- 電子情報通信学会 総合大会, Mar. 2013, Japanese, 電子情報通信学会, 岐阜, Domestic conference低参照電圧を用いた実時間計測用弛張発振回路Oral presentation
- 情報処理学会オーディオビジュアル複合情報処理研究会, Nov. 2012, Japanese, 情報処理学会, 福井市, Domestic conference超解像を用いたJPEGコーデックに関する一検討Oral presentation
- 電子情報通信学会イメージ・メディア・クオリティ研究会, Oct. 2012, Japanese, 電子情報通信学会, 京都市, Domestic conferenceカラー画像の主観的品質とSSIMの関係についてOral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会・情報処理学会, 東京都, Domestic conference野球中継映像におけるスコアテロップのレイアウト認識Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2012, Japanese, 電子情報通信学会, 富山, Domestic conference適応バイアス技術を用いた超低電力CMOSオペアンプの評価Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2012, Japanese, 電子情報通信学会, 富山, Domestic conference超低電圧ダイナミックコンパレータのためのオフセット電圧補正回路の高精度化Oral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会, 東京都, Domestic conference組合せ最適化アルゴリズムに基づくオブジェクトとラベルのレイアウト認識Oral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会・情報処理学会, 東京都, Domestic conference階層的超解像による電子ズームの構成方法Oral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会・情報処理学会, 東京都, Domestic conferenceマルチモーダル入力に対応した重み付き多数決による識別器のGPU による高速化Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2012, Japanese, 電子情報通信学会, 富山, Domestic conferenceコンパレータのバラツキ補正技術を用いた弛張発振回路の評価Oral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会・情報処理学会, 東京都, Domestic conferenceウェーブレット変換に基づく学習型超解像のGPU による高速化手法Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2012, Japanese, 電子情報通信学会, 富山, Domestic conferencePVTバラツキ耐性を持つシングルスロープADコンバータOral presentation
- 電子情報通信学会・情報処理学会 第11回情報科学技術フォーラム(FIT2012), Sep. 2012, Japanese, 電子情報通信学会, 東京都, Domestic conferenceBag-of-Visual Words 表現を用いた放送映像中の類似シーン検出Oral presentation
- 情報処理学会 DA シンポジウム2012, Aug. 2012, Japanese, 情報処理学会, 下呂市, Domestic conference二分木辞書を用いた学習型超解像のストリーム処理型アーキテクチャOral presentation
- 情報処理学会 DA シンポジウム2012, Aug. 2012, Japanese, 情報処理学会, 下呂市, Domestic conference充足可能性判定に基づく誤り追跡入力生成と機能特定を用いた論理診断手法Oral presentation
- 情報処理学会 DA シンポジウム2012, Aug. 2012, Japanese, 情報処理学会, 下呂市, Domestic conferenceメタル配線により再構成可能なセルと論理再合成への応用Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference適応バイアス型コンパレータを用いたSC型DC-DC コンバータOral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference低電圧カレントミラー回路を用いた高精度ナノアンペア電流源Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference超低電力オペアンプの高速化技術Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference超低電圧ダイナミックコンパレータ回路のオフセットキャリブレーション手法の検討Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference準連続モードで動作するデジタル制御昇圧回路Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference高分解能SAR ADCに向けた容量DACの面積削減の検討Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference光エネルギー・ハーベスティングに向けたチャージポンプ回路の負荷電流特性改善Oral presentation
- 電子情報通信学会 総合大会, Mar. 2012, Japanese, 電子情報通信学会, 岡山市, Domestic conference逆流電流削減による差動型整流回路の変換効率改善Oral presentation
- 電子情報通信学会 パターン認識・メディア理解研究会, Mar. 2012, Japanese, 電子情報通信学会, 神戸市, Domestic conferenceカラー画像の品質評価に関する検討Oral presentation
- STARCシンポジウムFY2011, Feb. 2012, Japanese, STARC, 横浜市, Domestic conference適応バイアス電流生成技術を用いたナノワットパワー・オペアンプの高速化Poster presentation
- 電子情報通信学会 画像工学研究会, Nov. 2011, Japanese, 電子情報通信学会, 飯塚市, Domestic conference学習型超解像のための高能率な辞書Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2011, Japanese, 電子情報通信学会, 札幌市, Domestic conference超低電力CMOS温度センサの評価Oral presentation
- 電子情報通信学会・情報処理学会 第10回情報科学技術フォーラム(FIT2011), Sep. 2011, Japanese, 電子情報通信学会・情報処理学会, 函館市, Domestic conference学習型超解像における高周波パッチの探索および生成手法Oral presentation
- 電子情報通信学会・情報処理学会 第10回情報科学技術フォーラム(FIT2011), Sep. 2011, Japanese, 電子情報通信学会・情報処理学会, 函館市, Domestic conferenceマルチモーダル入力に対応した重み付き多数決による識別器Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2011, Japanese, 電子情報通信学会, 札幌市, Domestic conferenceコンパレータのバラツキ補正回路を用いた弛張発振回路Oral presentation
- 情報処理学会 DAシンポジウム2011, Aug. 2011, Japanese, 情報処理学会, 下呂市, Domestic conference修正可能な外部出力数に着目した部分修正に基づく論理診断手法Oral presentation
- 情報処理学会 DAシンポジウム2011, Aug. 2011, Japanese, 情報処理学会, 下呂市, Domestic conferenceビット構成の異なる加算器を組み合わせた木構造部分積加算回路による乗算器のグリッチ削減Oral presentation
- 情報処理学会 DAシンポジウム2011, Aug. 2011, Japanese, 情報処理学会, 下呂市, Domestic conferenceSVMに基づく画像認識処理のGPUを用いた高速化手法Oral presentation
- 電子情報通信学会 集積回路研究会, Jul. 2011, Japanese, 電子情報通信学会, 広島市, Domestic conference超低電圧ディジタル回路に向けた入出力論理補正レベルシフタ回路Oral presentation
- 電子情報通信学会 集積回路研究会, Jul. 2011, Japanese, 電子情報通信学会, 広島市, Domestic conference基板バイアス制御を用いた超低電圧センスアンプ回路の高速化Oral presentation
- 電子情報通信学会 第24回 シリコンアナログRF研究会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conference微小オフセット電圧による温度特性を改善した基準電流源回路Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conference熱電変換素子を用いた電力変換インターフェース回路Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conference超低電力CMOSスマート温度センサ回路Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conference超低電圧SRAM用センスアンプ回路のプリチャージ動作の高速化Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conference極低消費電力バンドギャップリファレンス回路の高精度化Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conferenceナノアンペア電流源回路の電流バラツキ補正Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conferenceサブスレッショルド・ディジタルLSIに向けた遅延制御回路技術Oral presentation
- 電子情報通信学会総合大会, Mar. 2011, Japanese, 電子情報通信学会, 東京, Domestic conferenceサブスレッショルドLSIに適したオンチップ電源回路の検討Oral presentation
- The 16th Asia and South Pacific Design Automation Conference, Jan. 2011, English, IEEE, 横浜市, International conferenceA 95-nA, 523ppm/C, 0.6-uW CMOS Current Reference Circuit with Subthreshold MOS Resistor LadderOral presentation
- IEEE Asian Solid-State Circuits Conference 2011, Nov. 2010, English, IEEE, 北京(中国), International conferenceA CMOS Bandgap and Sub-Bandgap Voltage Reference Circuits for Nanowatt Power LSIsOral presentation
- Synthesis And System Integration of Mixed Information technologies 2010 (SASIMI2010), Oct. 2010, English, SASIMI Organizing Committee, Taipei,TW., International conferenceAn incremental synthesis technique for ECO based on iterative procedure for error diagnosis and spare cell assignmentOral presentation
- Synthesis And System Integration of Mixed Information technologies 2010 (SASIMI2010), Oct. 2010, English, SASIMI Organizing Committee, Taipei,TW., International conferenceAn incremental synthesis technique based on error diagnosis and technology remapping for clustersOral presentation
- DA シンポジウム2010, Sep. 2010, Japanese, 情報処理学会, 豊橋市, Domestic conference入力信号間に生じる遅延を考慮した桁上げ吸収回路の低消費電力化Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2010, Japanese, 電子情報通信学会, さかい, Domestic conference書き込み安定性を向上させたサブスレッショルドSRAMOral presentation
- 第9回情報科学技術フォーラム (FIT2010), Sep. 2010, Japanese, 電子情報通信学会, 福岡市, Domestic conference局所ヒストグラムの時間変動に着目したディゾルブ検出手法Oral presentation
- DA シンポジウム2010, Sep. 2010, Japanese, 情報処理学会, 豊橋市, Domestic conferenceクラスタ単位のセル割当てを用いた論理再合成手法Oral presentation
- 第9回情報科学技術フォーラム (FIT2010), Sep. 2010, Japanese, 電子情報通信学会, 福岡市, Domestic conferenceウェーブレット係数の主成分分析を用いた学習型超解像Oral presentation
- 電子情報通信学会 ソサイエティ大会, Sep. 2010, Japanese, 電子情報通信学会, 堺市, Domestic conferenceTFFを用いた相補構成スイッチトキャパシタ型DC-DC コンバータOral presentation
- 2010 International Conference on Solid State Devices and Materials, Sep. 2010, English, JSAP, 東京, International conferenceTemperature Compensated Nano-Ampere CMOS Current Reference Circuit Using Small Offset VoltageOral presentation
- The 36th European Solid-State Circuits Conference, Sep. 2010, English, IEEE, セビリア(スペイン), International conferenceA nano-ampere current reference circuit and its temperature dependence control by using temperature characteristics of carrier mobilitiesOral presentation
- STARCフォーラム/シンポジウム2010, Aug. 2010, Japanese, 半導体理工学研究センター, 横浜市, Domestic conference適応バイアス技術を用いた超低電力コンパレータのチップ測定Poster presentation
- 2010 IEEE International 53rd Midwest Symposium on Circuits and Systems, Aug. 2010, English, IEEE, シアトル(米国), International conferenceWrite-Assisted Subthreshold SRAM by Using On-Chip Threshold Voltage Monitoring CircuitOral presentation
- 2010 IEEE International 53rd Midwest Symposium on Circuits and Systems, Aug. 2010, English, IEEE, シアトル(米国), International conferenceNano-Ampere CMOS Current Reference with Little Temperature Dependence Using Small Offset VoltageOral presentation
- 電子情報通信学会 集積回路研究会, Jul. 2010, Japanese, 電子情報通信学会, 大阪市, Domestic conference低電圧ディジタルLSIのためのレベルコンバータ回路Oral presentation
- LSIとシステムのワークショップ2010, May 2010, Japanese, 電子情報通信学会, 北九州市, Domestic conference超低電力で動作するオンチップ参照クロック源Poster presentation
- LSIとシステムのワークショップ2010, May 2010, Japanese, 電子情報通信学会, 北九州市, Domestic conferenceサブスレッショルド・ディジタル回路のためのオンチップ遅延バラツキ補正回路の評価Poster presentation
- LSIとシステムのワークショップ2010, May 2010, Japanese, 電子情報通信学会, 北九州市, Domestic conferenceサブスレッショルドLSIにむけた低電圧レギュレータ回路Poster presentation
- IEEE International Symposium on Circuits and Systems (ISCAS 2010), May 2010, English, IEEE, Paris,FR., International conferenceSuper-Resolution Technique for Thermography with Dual-Camera SystemOral presentation
- 第38回知能システムシンポジウム, Mar. 2010, Japanese, 計測自動制御学会, 神戸市, Domestic conference汎用監視支援システムの構築-動き特徴量の抽出-Oral presentation
- 第38回知能システムシンポジウム, Mar. 2010, Japanese, 計測自動制御学会, 神戸市, Domestic conference汎用監視支援システムの構築-HOG特徴量と動き特徴量を用いた識別-Oral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conference適応バイアス技術を用いた極低消費電流コンパレータOral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conference低電圧サブスレッショルドLSIに向けたリニア・レギュレータ回路Oral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conferenceデューティ制御回路を用いたスイッチトキャパシタ型DC-DCコンバータOral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conferenceサブスレッショルドCMOSディジタル回路の遅延バラツキ補正アーキテクチャの評価Oral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conferenceSource-Coupled Logic回路を用いたサブスレッショルドSRAMセルの検討Oral presentation
- 電子情報通信学会総合大会, Mar. 2010, Japanese, 電子情報通信学会(IEICE), 仙台, Domestic conferencePVTバラツキ耐性を有する基準クロック発振回路Oral presentation
- 映像情報メディア学会メディア工学研究会, Dec. 2009, Japanese, ITE, 松本市, Domestic conference野球中継番組におけるテロップ情報を用いたダイジェスト映像自動生成Oral presentation
- 情報処理学会研究報告, Dec. 2009, Japanese, IPSJ, 高知市, Domestic conference回路構造を考慮した修正箇所候補抽出に基づく論理診断手法Oral presentation
- 情報処理学会研究報告, Dec. 2009, Japanese, IPSJ, 高知市, Domestic conferenceハイブリッド型CMOS論理構成の4-2加算器による乗算器のグリッチ削減Oral presentation
- Workshop on Information; Nano and Photonics Technology 2009, Dec. 2009, English, 神戸大学, 連携創造本部先端研究推進部門, Kobe, Japan, International conferenceAn on-chip delay compensation for nano-power subthreshold CMOS digital LSIsPoster presentation
- 電子情報通信学会第24回信号処理シンポジウム, Nov. 2009, Japanese, IEICE, 鹿児島市, Domestic conferenceクロス形状フラクタルを用いた画像の高解像度化Oral presentation
- 電子情報通信学会 集積回路研究会, Oct. 2009, Japanese, 電子情報通信学会(IEICE), 東京, Domestic conference極低電力サブスレッショルド・ディジタル回路のオンチップ遅延バラツキ補正技術Oral presentation
- The 35th European Solid-State Circuits Conference, Sep. 2009, English, 米国電気電子学会(IEEE), Athens, Greece, International conferenceVariation Tolerant Subthreshold Adder Design for Ultra-low Power LSIsPoster presentation
- 情報処理学会DAシンポジウム2009, Aug. 2009, Japanese, IPSJ, 加賀市, Domestic conference素子のクラスタリングを用いた論理診断手法Oral presentation
- 情報処理学会DAシンポジウム2009, Aug. 2009, Japanese, IPSJ, 加賀市, Domestic conference信号線欠落に対応した論理診断における変更箇所数削減Oral presentation
- 52nd. IEEE International Midwest Symposium on Circuits and Systems, Aug. 2009, English, 米国電気電子学会(IEEE), Cancun, Mexico, International conferenceSwitching-voltage detection and compensation circuits for ultra-low-voltage CMOS invertersOral presentation
- 52nd. IEEE International Midwest Symposium on Circuits and Systems, Aug. 2009, English, 米国電気電子学会(IEEE), Cancun, Mexico, International conferenceDelay-compensation techniques for ultra-low-power subthreshold CMOS digital LSIsOral presentation
- 東京大学VDECデザイナーズフォーラム2009, Jun. 2009, Japanese, 東京大学VDEC, 東京, Domestic conference逆流電流遮断による同期整流型DC-DCコンバータの電力変換効率改善Poster presentation
- 東京大学VDECデザイナーズフォーラム2009, Jun. 2009, Japanese, 東京大学VDEC, 東京, Domestic conferencePVTバラツキ特性を改善したサブスレッショルド電流源Poster presentation
- 電子情報通信学会 LSIとシステムのワークショップ2009, May 2009, Japanese, 電子情報通信学会(IEICE), 北九州, Domestic conferenceサブスレッショルド・ディジタル回路における遅延時間制御の一設計手法Poster presentation
- 電子情報通信学会 LSIとシステムのワークショップ2009, May 2009, Japanese, 電子情報通信学会(IEICE), 北九州, Domestic conferenceインダクタの逆流電流検出回路を用いた高効率同期整流型DC-DCコンバータPoster presentation
- 電子情報通信学会 LSIとシステムのワークショップ2009, May 2009, Japanese, 電子情報通信学会(IEICE), 北九州, Domestic conferenceMOSFETのキャリア移動度温度特性を利用した基準電流源回路Poster presentation
- 電子情報通信学会総合大会, Mar. 2009, Japanese, IEICE, 松山, Domestic conference電源電圧制御によるサブスレッショルド・ディジタル回路のプロセスバラツキ補正技術Oral presentation
- 電子情報通信学会総合大会, Mar. 2009, Japanese, IEICE, 松山, Domestic conference軽負荷動作時の逆流電流損失を改善した同期整流型DC-DCコンバータOral presentation
- 電子情報通信学会総合大会, Mar. 2009, Japanese, IEICE, 松山, Domestic conferenceサブスレッショルドCMOS LSIに向けたスイッチトキャパシタ型DC-DCコンバータOral presentation
- 電子情報通信学会総合大会, Mar. 2009, Japanese, IEICE, 松山, Domestic conferenceMOSFETのしきい値電圧差を利用した参照電圧源回路Oral presentation
- 電子情報通信学会総合大会, Mar. 2009, Japanese, IEICE, 松山, Domestic conferenceMOSFETのキャリア移動度温度特性を利用した基準電流源回路Oral presentation
- 15th Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI 2009), Mar. 2009, English, 沖縄, International conferenceAn error diagnosis technique based on location sets to rectify subcircuitsPoster presentation
- 平成20年電気関係学会関西支部連合大会, Nov. 2008, Japanese, 京都, Domestic conferenceビットライン信号を用いたSOI-SRAMの高速化Poster presentation
- Workshop on Information, Nano, and Photonics Technology, Nov. 2008, English, 神戸大学産学連携推進本部, 神戸, International conferenceAn On-Chip Threshold Voltage Difference Monitor Circuit for Nano-Power Sub-threshold Digital LSIsPoster presentation
- 第7回情報科学技術フォーラム, Sep. 2008, Japanese, 神奈川県藤沢市, Domestic conference野球中継番組におけるダイジェスト映像自動生成Oral presentation
- 第7回情報科学技術フォーラム, Sep. 2008, Japanese, 神奈川県藤沢市, Domestic conference赤外線サーモグラフィのための超解像手法Oral presentation
- 第7回情報科学技術フォーラム, Sep. 2008, Japanese, 神奈川県藤沢市, Domestic conferenceTotal Variationに基づく画像雑音除去の高速化手法Oral presentation
- 情報処理学会DA シンポジウム2008, Aug. 2008, Japanese, 静岡県浜松市, Domestic conference部分回路の修正箇所情報を利用した論理診断手法Oral presentation
- 13th International OFDM-Workshop 2008, Aug. 2008, English, Hamburg, Germany, International conferenceFading Compensation for OFDM Mobile Reception Using Guard IntervalOral presentation
- 14th Workshop on Synthesis And System Integration of Mixed Information technologies, Oct. 2007, English, IEEE Sapporo Section, 札幌市, International conferenceAn LUT-Based Error Diagnosis Technique Extended for Multiple Missing Line Errors Based on Iterative Diagnosis ProcedureOral presentation
- 14th Workshop on Synthesis And System Integration of Mixed Information technologies, Oct. 2007, English, IEEE Sapporo Section, 札幌市, International conferenceAn Error Diagnosis Technique Based on Specifications with Don't CaresOral presentation
- 第6回情報科学技術フォーラム, Sep. 2007, Japanese, 情報処理学会, 豊田市, Domestic conferenceルームミラー装着式車内カメラの自動キャリブレーションと運転者の頭部位置推定Oral presentation
- 第6回情報科学技術フォーラム, Sep. 2007, Japanese, 情報処理学会, 豊田市, Domestic conferenceクローズドキャプションを用いた野球映像インデキシングOral presentation
- 第6回情報科学技術フォーラム, Sep. 2007, Japanese, 情報処理学会, 豊田市, Domestic conferenceクローズドキャプションを用いたニュース番組におけるトピック分割手法Oral presentation
- 情報処理学会 DA シンポジウム2007, Aug. 2007, Japanese, 情報処理学会, 浜松市, Domestic conference補正乗算器の動的割当てによるVSBイコライザの消費電力削減Oral presentation
- 情報処理学会 DA シンポジウム2007, Aug. 2007, Japanese, 情報処理学会, 浜松市, Domestic conference部分回路の修正解に含まれるドントケアを考慮した論理診断手法Oral presentation
- 電子情報通信学会技術研究報告, Aug. 2007, Japanese, 電子情報通信学会, 高知市, Domestic conference演算量を抑えたOFDM 移動受信のためのICI 除去Oral presentation
- 情報処理学会 DA シンポジウム2007, Aug. 2007, Japanese, 情報処理学会, 浜松市, Domestic conferenceタイミングを考慮した論理再合成手法Oral presentation
- 第6回IEEE関西コロキアム・電子デバイスワークショップ, Oct. 2006, Japanese, 大阪大学中之島センター, Domestic conferenceActive Body-Biasing Control Technique for Bootstrap Pass-Transistor Logic on PD-SOI at 0.5V-VDD[Invited]Invited oral presentation
- FIT2006, Sep. 2006, Japanese, 福岡大学, Domestic conference赤外線ポインタと画像処理によるプレゼンテーション支援システムOral presentation
- FIT2006, Sep. 2006, Japanese, 福岡大学, Domestic conference視覚特性を考慮した誤差拡散法によるディスプレイの高階調化Oral presentation
- FIT2006, Sep. 2006, Japanese, 福岡大学, Domestic conference医療用液晶ディスプレイのための3 倍密度誤差拡散法とその拡散係数の改善Oral presentation
- DA シンポジウム 2006, Jul. 2006, Japanese, 遠鉄ホテル エンパイア, Domestic conference不用セルを再利用する論理診断に基づく論理再合成手法Oral presentation
- 電子情報通信学会 VLSI設計技術研究会, May 2006, Japanese, 愛媛大学, Domestic conference相関演算結果を用いた8-VSBイコライザの面積削減Oral presentation
- 電子情報通信学会集積回路研究会, Dec. 2005, Japanese, 高知工科大学, Domestic conference電荷再利用型動的ボディ電位制御によるSOI-CMOSの高速化手法Oral presentation
- 電子情報通信学会集積回路研究会, Dec. 2005, Japanese, 高知工科大学, Domestic conferencePD-SOIの動的ボディ・バイアス制御を利用したブートストラップ型パス・トランジスタ方式Oral presentation
- 電子情報通信学会ITS研究会, Sep. 2005, Japanese, 機械振興会館, Domestic conference近赤外線パルス照明とステレオカメラを用いた運転手の頭部追跡手法Oral presentation
- DAシンポジウム2005, Aug. 2005, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conference複数の信号線欠落誤りに対応した論理診断手法Oral presentation
- DAシンポジウム2005, Aug. 2005, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conferenceOFDM復調用FFTの消費電力削減Oral presentation
- DAシンポジウム2004,247-252, 2004, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conference機能仕様におけるドントケア条件を考慮した論理診断手法Oral presentation
- DAシンポジウム2004,253-258, 2004, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conferenceプール再代入に基づく論理診断手法Oral presentation
- DAシンポジウム2004,319-324, 2004, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conferenceフローティングS01に対応したリーク電力・面積削減手法Oral presentation
- 情報処理学会関西支部大会,C-04,155-158, 2004, Japanese, 情報処理学会, 未記入, Domestic conferenceクロック・ゲーティング機構を対象とするリーク電力削減手法Oral presentation
- DAシンポジウム2004,221-224, 2004, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conferenceOFDM復調用FFTの回路面積削減Oral presentation
- DAシンポジウム2004,325-330, 2004, Japanese, 情報処理学会 システムLSI設計技術研究会, 遠鉄ホテルエンパイア, Domestic conferenceDual-VDDを用いた低消費電力S01レイアウト方式Oral presentation
- DAシンポジウム 2003, 2003, Japanese, 情報物理学会, 遠鉄ホテルエンパイア(浜松市), Domestic conference先見型動的ボディ制御によるSOILSIの高速化手法Oral presentation
- DAシンポジウム 2003, 2003, Japanese, 情報物理学会, 遠鉄ホテルエンパイア(浜松市), Domestic conference設計変更に対応した論理再合成における診断対象回路抽出Oral presentation
- 第2回情報科学技術フォーラム, 2003, Japanese, 情報処理学会, 札幌学院大学, Domestic conference医用画像DICOMの可逆圧縮に関する検討Oral presentation
- 第2回情報科学技術フォーラム, 2003, Japanese, 情報処理学会, 札幌学院大学, Domestic conferenceマルチカメラ映像からの球追跡のための一手法Oral presentation
- 映像情報メディア学年年次大会, 2003, Japanese, 映像情報メディア学会, 未記入, Domestic conferenceディスプレイの画素形状に応じた光学的画像処理による映像品質の改善Oral presentation
- 映像情報メディア学年年次大会, 2003, Japanese, 映像情報メディア学会, 未記入, Domestic conferenceディジタルディスプレイのための疑似階調表現手法とその客観評価Oral presentation
- 映像情報メディア学年年次大会, 2003, Japanese, 映像情報メディア学会, 未記入, Domestic conferenceサブフィールド法における発光パターンの解析と評価Oral presentation
- DAシンポジウム 2003, 2003, Japanese, 情報物理学会, 遠鉄ホテルエンパイア(浜松市), Domestic conferenceBSディジタル放送用復調回路におけるイコライザの回路規模削減Oral presentation
■ Research Themes- 学術研究助成基金助成金/基盤研究(C), Apr. 2018 - Mar. 2021, Principal investigatorCompetitive research funding
- 学術研究助成基金助成金/基盤研究(C), Apr. 2015 - Mar. 2018, Principal investigatorCompetitive research funding
- 学術研究助成基金助成金/基盤研究(C), Apr. 2015 - Mar. 2018Competitive research funding
- 科学研究費補助金/基盤研究(C), Apr. 2012 - Mar. 2015, Principal investigatorCompetitive research funding
- 科学研究費補助金/基盤研究(C), Apr. 2012 - Mar. 2015Competitive research funding
- 科学研究費補助金/基盤研究(C), 2009, Principal investigatorCompetitive research funding
- 科学研究費補助金/基盤研究(C), 2006, Principal investigatorCompetitive research funding
- 半導体装置(2)特願2005-360347, 14 Dec. 2005, 大学長, 特許4884760, 16 Dec. 2011Patent right
- 半導体装置(1)特願2005-159178, 31 May 2005, 大学長, 特許4869631, 25 Nov. 2011Patent right
- コンパレータ回路特願44369, 01 Mar. 2010, 企業単独, 特許未登録, 01 Mar. 2010Patent right
- コンテンツ選択支援装置特願2002-262774, 09 Sep. 2002, 大学長, 特許4220202, 21 Nov. 2008Patent right
- for ultra low power design. Although conventional PTL-based circuits are with difficulty in operation due to lack of driving power as V_